Publicaciones

• Communication dans un congrès

A practical method for improving mobile devices trajectory estimation via MEMs accelerometers

K. Saidi, Marie Zwingelstein, Ali Khanafer, M. Asmani, Sébastien Grondel

The challenging research area of locating a mobile device has gained interest in recent years with the emergence of wireless sensor networks (WSN) as well as of low-cost sensors based on micro-electromechanical systems (MEMS). This paper focuses on the dead reckoning (DR) algorithm which doubly...

11th France-Japan Congress / 9th Europe-Asia Congress on Mechatronics (MECATRONICS) / 17th International Conference on Research and Education in Mechatronics (REM), Jun 2016, Compiegne, France. paper CD-000914, 103-110. ⟨hal-03280241⟩

• Article dans une revue

In-flow detection of ultra-small magnetic particles by an integrated giant magnetic impedance sensor

Kamel Fodil, Matthieu Denoual, Christophe Dolabdjian, A. Treizebre, Vincent Senez

Applied Physics Letters, 2016, ⟨10.1063/1.4948286⟩. ⟨hal-01417815⟩

• Article dans une revue

Multilayer Pt/Al based ohmic contacts for AlGaN/GaN heterostructures stable up to 600°C ambient air

Nitin Goyal, Srujana Dusari, Jochen Bardong, F Medjdoub, Andreas Kenda, Alfred Binder

In this paper, we present a Pt/Al multilayer stack-based ohmic contact metallization for AlGaN/GaN heterostructures. CTLM structures were fabricated to assess the electrical properties of the proposed metallization. The fabricated stack shows excellent stability after more than 100 hours of...

Solid-State Electronics, 2016, 116, pp.107-110. ⟨10.1016/j.sse.2015.12.002⟩. ⟨hal-03028357⟩

• Communication dans un congrès

Development of a reference wafer for on-wafer testing of extreme impedance devices

H. Votsi, I. Roch-Jeune, Kamel Haddadi, C. Li, Gilles Dambrine, P. H. Aaen, N. Ridler

This paper describes the design, fabrication, and testing of an on-wafer substrate that has been developed specifically for measuring extreme impedance devices using an on-wafer probe station. Such devices include carbon nano-tubes (CNTs) and structures based on graphene which possess impedances in...

88th ARFTG Microwave Measurement Symposium, ARFTG 2016, Dec 2016, Austin, United States. 4 p., ⟨10.1109/ARFTG.2016.7839719⟩. ⟨hal-03224658⟩

• Article dans une revue

Wetting characterization of high aspect ratio nanostructures by gigahertz acoustic reflectometry

Christophe Virgilio, Julien Carlier, Pierre Campistron, Malika Toubal, Philippe Garnier, L. Broussous, V. Thomy, Bertrand Nongaillard

Wetting efficiency of microstructures or nanostructures patterned on Si wafers is a real challenge in integrated circuits manufacturing. In fact, bad or non-uniform wetting during wet processes limits chemical reactions and can lead to non-complete etching or cleaning inside the patterns and device...

International Journal of Mechanical and Mechatronics Engineering, 2016, 10 (3), pp.413-418. ⟨hal-03560404⟩

• Communication dans un congrès

Metal/insulator/semiconductor contacts for ultimately scaled CMOS nodes: projected benefits and remaining challenges

Julien Borrel, Louis Hutin, Helen Grampeix, Emmanuel Nolot, Magali Tessaire, Guillaume Rodriguez, Yves Morand, Fabrice Nemouchi, Magali Gregoire, Emmanuel Dubois, Maud Vinet

In this paper, some key fundamental aspects of Metal / Insulator / Semiconductor contacts as well as practical issues occurring with their implementation are reviewed in order to fully comprehend the opportunities and limitations of this approach.

IWJT 2016 - 16th International Workshop on Junction Technology, May 2016, Shanghai, China. pp.14-19. ⟨hal-03325000⟩

• Communication dans un congrès

New Optical Approach of SAW Delay Line Characterization

Lyes Djoumi, Nikolay Smagin, Meddy Vanotti, Dame Fall, Etienne Herth, Marc Duquennoy, Mohammadi Ouaftouh, Virginie Blondeau-Patissier, Frédéric Jenot

Surface acoustic wave devices are usually characterized solely through their electrical parameters. Mechanical displacements can also be numerically computed using finite element software. In this paper, we show that this characterization can be supplemented using an interferometer system capable...

30th Eurosensors Conference, EUROSENSORS XXX, Sep 2016, Budapest, Hungary. pp.838-843. ⟨hal-03586205⟩

• Article dans une revue

Experimental Study and Device Design of NO, NO2, and NH3 Gas Detection for a Wide Dynamic and Large Temperature Range Using Pt/AlGaN/GaN HEMT

Chris Bishop, Yacine Halfaya, Ali Soltani, Suresh Sundaram, Xin Li, Jérémy Streque, Youssef El Gmili, Paul B Voss, Jean-Paul Salvestrini, Abdallah Ougazzaden

We report an AlGaN/GaN HEMT gas sensor designed to enable NO, NO2, and NH3 detection from 100°C-400°C over a large concentration range. Device modeling is performed to optimize several HEMT device parameters for sensing, and the experimental results show that the optimized sensor has improved...

IEEE Sensors Journal, 2016, 16 (18), pp.6828-6838. ⟨10.1109/JSEN.2016.2593050⟩. ⟨hal-02385234⟩

• Article dans une revue

On-chip and freestanding elastic carbon films for micro-supercapacitors

Peihua Huang, Christophe Lethien, Sébastien Pinaud, Kevin Brousse, Raphaël Laloo, Viviane Turq, Marc Respaud, Arnaud Demortiere, Barbara Daffos, Pierre-Louis Taberna, Bruno Chaudret, Yury Gogotsi, Patrice Simon

Integration of electrochemical capacitors with silicon-based electronics is a major challenge, limiting energy storage on a chip. We describe a wafer-scale process for manufacturing strongly adhering carbide-derived carbon films and interdigitated micro-supercapacitors with embedded titanium...

Science, 2016, 351 (6274), pp.691-695. ⟨10.1126/science.aad3345⟩. ⟨hal-01489186⟩

• Article dans une revue

Tunneling spectroscopy of p-type doping in silicon from boron-containing molecular monolayer

K.K. Sossoe, Corentin Durand, L. Mathey, T. Alphazan, A. Sylla, M.M. Dzagli, A. Mohou, J.P. Nys, Maxime Berthe, C. Thieuleux, C. Coperet, J.P. Barnes, B. Grandidier

Microelectronic Engineering, 2016, 149, pp.125-128. ⟨10.1016/j.mee.2015.10.002⟩. ⟨hal-02084763⟩