Publicaciones

• Article dans une revue

Multilayer Pt/Al based ohmic contacts for AlGaN/GaN heterostructures stable up to 600°C ambient air

Nitin Goyal, Srujana Dusari, Jochen Bardong, F Medjdoub, Andreas Kenda, Alfred Binder

In this paper, we present a Pt/Al multilayer stack-based ohmic contact metallization for AlGaN/GaN heterostructures. CTLM structures were fabricated to assess the electrical properties of the proposed metallization. The fabricated stack shows excellent stability after more than 100 hours of...

Solid-State Electronics, 2016, 116, pp.107-110. ⟨10.1016/j.sse.2015.12.002⟩. ⟨hal-03028357⟩

• Communication dans un congrès

Development of a reference wafer for on-wafer testing of extreme impedance devices

H. Votsi, I. Roch-Jeune, Kamel Haddadi, C. Li, Gilles Dambrine, P. H. Aaen, N. Ridler

This paper describes the design, fabrication, and testing of an on-wafer substrate that has been developed specifically for measuring extreme impedance devices using an on-wafer probe station. Such devices include carbon nano-tubes (CNTs) and structures based on graphene which possess impedances in...

88th ARFTG Microwave Measurement Symposium, ARFTG 2016, Dec 2016, Austin, United States. 4 p., ⟨10.1109/ARFTG.2016.7839719⟩. ⟨hal-03224658⟩

• Article dans une revue

High photocatalytic activity of plasmonic Ag@AgCl/Zn2 SnO4 nanocomposites synthesized using hydrothermal method

Monaam Ben Ali, Abderrahmane Hamdi, Habib Elhouichet, Brigitte Sieber, Ahmed Addad, Yannick Coffinier, Luc Boussekey, Mokhtar Férid, Sabine Szunerits, Rabah Boukherroub

Ag@AgCl/Zn 2 SnO 4 (ZTO) nanocomposites were successfully prepared by a hydrothermal method.

RSC Advances, 2016, 6 (83), pp.80310-80319. ⟨10.1039/C6RA14813A⟩. ⟨hal-03837468⟩

• Article dans une revue

Wetting characterization of high aspect ratio nanostructures by gigahertz acoustic reflectometry

Christophe Virgilio, Julien Carlier, Pierre Campistron, Malika Toubal, Philippe Garnier, L. Broussous, V. Thomy, Bertrand Nongaillard

Wetting efficiency of microstructures or nanostructures patterned on Si wafers is a real challenge in integrated circuits manufacturing. In fact, bad or non-uniform wetting during wet processes limits chemical reactions and can lead to non-complete etching or cleaning inside the patterns and device...

International Journal of Mechanical and Mechatronics Engineering, 2016, 10 (3), pp.413-418. ⟨hal-03560404⟩

• Communication dans un congrès

Metal/insulator/semiconductor contacts for ultimately scaled CMOS nodes: projected benefits and remaining challenges

Julien Borrel, Louis Hutin, Helen Grampeix, Emmanuel Nolot, Magali Tessaire, Guillaume Rodriguez, Yves Morand, Fabrice Nemouchi, Magali Gregoire, Emmanuel Dubois, Maud Vinet

In this paper, some key fundamental aspects of Metal / Insulator / Semiconductor contacts as well as practical issues occurring with their implementation are reviewed in order to fully comprehend the opportunities and limitations of this approach.

IWJT 2016 - 16th International Workshop on Junction Technology, May 2016, Shanghai, China. pp.14-19. ⟨hal-03325000⟩

• Communication dans un congrès

Etude par nanoindentation des proprietes mecaniques du multicouche constituant une cellule solaire a base de cigs

Hocine Abib, Alain Iost, Alex Montagne, Khadidja Rahmoun, Boubakeur Ayachi, Jean-Pierre Vilcot

Le but de notre travail est d'évaluer les propriétés mécaniques des différentes couches constituant une cellule solaire à base de CIGS afin d'en appréhender, à terme, leur influence sur la durée de vie de la cellule. Nous rapportons principalement les valeurs de la dureté et le module de...

Indentation 2016, Oct 2016, Lille, France. ⟨hal-03169269⟩

• Article dans une revue

Experimental Study and Device Design of NO, NO2, and NH3 Gas Detection for a Wide Dynamic and Large Temperature Range Using Pt/AlGaN/GaN HEMT

Chris Bishop, Yacine Halfaya, Ali Soltani, Suresh Sundaram, Xin Li, Jérémy Streque, Youssef El Gmili, Paul B Voss, Jean-Paul Salvestrini, Abdallah Ougazzaden

We report an AlGaN/GaN HEMT gas sensor designed to enable NO, NO2, and NH3 detection from 100°C-400°C over a large concentration range. Device modeling is performed to optimize several HEMT device parameters for sensing, and the experimental results show that the optimized sensor has improved...

IEEE Sensors Journal, 2016, 16 (18), pp.6828-6838. ⟨10.1109/JSEN.2016.2593050⟩. ⟨hal-02385234⟩

• Article dans une revue

Enhancing V2X communication based on a new comb-pilot estimation approach

Ahlem Sassi, Yassin El Hillali, Atika Rivenq, F. Charfi, L. Kamoun

International Journal of Vehicular Technology, 2016, 14 p. ⟨hal-03682444⟩

• Autre publication scientifique

Advances in Historical Studies [Editor in Chief 5/4]

Raffaele Pisano

2016. ⟨hal-04511018⟩

• Article dans une revue

SAW synthesis with IDTs array and the inverse filter: toward a versatile SAW toolbox for microfluidics and biological applications

Antoine Riaud, Michael Baudoin, Jean-Louis Thomas, Olivier Bou Matar

Surface acoustic waves (SAWs) are versatile tools to manipulate fluids at small scales for microfluidics and biological applications. A non-exhaustive list of operations that can be performed with SAW includes sessile droplet displacement, atomization, division and merging but also the actuation of...

IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 2016, 63 (10), pp.1601 - 1607. ⟨10.1109/TUFFC.2016.2558583⟩. ⟨hal-01314669⟩