Publications

• Article dans une revue

Energy Efficient Hardware and Improved Cluster-Tree Topology for Lifetime Prolongation in ZigBee Sensor Networks

Mourad Ouadou, Ouadoudi Zytoune, Yassin El Hillali, Atika Rivenq, Driss Aboutajdine

In wireless sensor networks, building energy-efficient systems is one of the major challenges. In such networks, nodes are usually supplied by low power and small batteries. Many factors are involved in the energy consumption, and this issue may be considered as a cross-layer problem, from the…

Journal of sensor and actuator networks, 2017, 6 (4), pp.22. ⟨10.3390/jsan6040022⟩. ⟨hal-03528721⟩

• Article dans une revue

High temperature gradient calorimetric wall shear stress micro-sensor for flow separation detection

Cécile Ghouila-Houri, Quentin Gallas, Eric Garnier, Alain Merlen, Romain Viard, Abdelkrim Talbi, Philippe Pernod

The paper describes and discusses the design and testing of an efficient and high-sensitivity calorimetricthermal sensor developed for bi-directional wall shear stress measurements in aerodynamic flows. Themain technical application targeted is flow separation detection. The measurement principle…

Sensors and Actuators A: Physical , 2017, 266, pp.232-241. ⟨10.1016/j.sna.2017.09.030⟩. ⟨hal-01705613⟩

• Article dans une revue

International Summer School, Lille Report

Raffaele Pisano

Viewpoint, 2017, 110 (6), pp.13-14. ⟨hal-04509329⟩

• Article dans une revue

Core–shell structured reduced graphene oxide wrapped magnetically separable rGO@CuZnO@Fe₃O₄ microspheres as superior photocatalyst for CO₂ reduction under visible light

P. Kumar, C. Joshi, Alexandre Barras, B. Sieber, A. Addad, L. Boussekey, Sabine Szunerits, Rabah Boukherroub, S. Jain

A highly efficient, recyclable and magnetically separable core-shell structured CuZnO@Fe₃O₄ microsphere wrapped with reduced graphene oxide (rGO@CuZnO@Fe₃O₄) photocatalyst has been developed and used for the…

• Communication dans un congrès

Finite element modeling of a piezoelectric slender bar transducer equipped with a multilayer backing for medical imaging applications

Nadia El Atlas, Abdelmajid Bybi, Hilal Drissi, Anne-Christine Hladky

The goal of this work is to investigate the impact of front and back matching layers properties on a piezoelectric slender bar transducer performances and to propose a novel multilayer backing absorber. Quarter-wavelength acoustic matching layers and backing are known as essential components to…

3rd International Conference on Electrical and Information Technologies (ICEIT), Nov 2017, Rabat, Morocco. ⟨10.1109/EITech.2017.8255284⟩. ⟨hal-03300126⟩

• Article dans une revue

On demand electrochemical release of drugs from porous reduced graphene oxide modified flexible electrodes

Samia Boulahneche, Roxana Jijie, Alexandre Barras, Fereshteh Chekin, Santosh K Singh, Julie Bouckaert, Mohamed Salah Medjram, Sreekumar Kurungot, Rabah Boukherroub, Sabine Szunerits

Despite the advantages of an electrochemical control for drug release, only a handful of electrochemical-based release systems have been developed so far. We report herein on the development of an electrochemically activatable platform for on-demand delivery of drugs. It is based on flexible gold…

Journal of materials chemistry‎ B, 2017, 5 (32), pp.6557-6565. ⟨10.1039/C7TB00687J⟩. ⟨hal-01679631⟩

• Communication dans un congrès

Experimental investigation of stochastic resonance in a 65 nm CMOS artificial neuron

Sara Hedayat, Ilias Sourikopoulos, Christophe Loyez, Francois Danneville, Laurent Clavier, Virginie Hoel, A. Cappy

This work proposes an experimental demonstration of the stochastic resonance, a phenomenon widely observed in biology using a 65 nm CMOS artificial neuron. The stochastic resonance has been revealed through two different statistical studies. Moreover, when optimal, a signal to noise ratio at the…

International Conference on Noise and Fluctuations (ICNF), Jun 2017, Vilnius, Lithuania. ⟨10.1109/ICNF.2017.7985962⟩. ⟨hal-03270101⟩

• Article dans une revue

Selective Manipulation of Microscopic Particles with Precursor Swirling Rayleigh Waves

Antoine Riaud, Michael Baudoin, Olivier Bou Matar, Loic Becerra, Jean-Louis Thomas

Contactless manipulation of microparticles is demonstrated with single-beam acoustical tweezers based on precursor swirling Rayleigh waves. These surface waves degenerate into acoustical vortices when crossing a stack made of a fluid layer and its solid support, hence creating a localized…

Physical Review Applied, 2017, 7, pp.024007. ⟨10.1103/PhysRevApplied.7.024007⟩. ⟨hal-01519025⟩

• Article dans une revue

Modeling and optimization of core/shell p-i-n Si/Si0.2Ge0.8 nanowire for photovoltaic

Fethi Benyettou, Abdelkader Aissat, Isabelle Berbezier, Jean-Pierre Vilcot

In this work we propose a modeling and simulation of core/shell p-i-n Si/Si0.2Ge0.8 nanowire for photovoltaic. In the first step of this work, we have compared the core/shell p-i-n homo-junction Si and heterojunction Si/Si0.2Ge0.8 Nanowire (NW) solar cell having a length of 3 mu m and a radius of 0…

Optik, 2017, 149, pp.246-251. ⟨10.1016/j.ijleo.2017.09.056⟩. ⟨hal-01694450⟩

• Pré-publication, Document de travail

Capacitive microwave sensor for toxic vapor detection in an atmospheric environment

P. Bahoumina, H. Hallil, K Pieper, J. Lachaud, D. Rebière, C. Dejous, A. Abdelghani, Kamel Frigui, Stéphane Bila, D. Baillargeat, Q. Zhang, P. Coquet, E. Pichonat, H. Happy

This paper presents an inkjet printing capacitive microwave sensor for toxic vapor detection. The designed sensors were presented and fabricated with success. The experiments show sensitivity to ethanol vapor according to the S parameters. It is equal to 0.9 kHz/ppm and 1.3 kHz/ppm for the sensors…

2017. ⟨hal-02376883⟩