Publications

• Article dans une revue

Robust Al0.23Ga0.77N channel HFETs on bulk AlN for high voltage power electronics

J. Mehta, Idriss Abid, Reda Elwaradi, Yvon Cordier, F Medjdoub

AlxGa1-xN heterojunction FETs (HFETs) have been an eye catcher for high voltage power electronics with its potential to outperform the predecessors by virtue of high critical breakdown field of the material, which can be tuned by varying Al mole-fraction. In this work, we demonstrate Al0.23Ga0.77N…

e-Prime – Advances in Electrical Engineering, Electronics and Energy, 2023, 5, pp.100263. ⟨10.1016/j.prime.2023.100263⟩. ⟨hal-04194891⟩

• Article dans une revue

Deep learning aided topology optimization of phononic crystals

Paweł Kudela, Abdalraheem Ijjeh, Maciej Radzienski, Marco Miniaci, Nicola Pugno, Wieslaw Ostachowicz

In this work, a novel approach for the topology optimization of phononic crystals based on the replacement of the computationally demanding traditional solvers for the calculation of dispersion diagrams with a surrogate deep learning (DL) model is proposed. We show that our trained DL model is…

Mechanical Systems and Signal Processing, 2023, 200, pp.110636. ⟨10.1016/j.ymssp.2023.110636⟩. ⟨hal-04182336⟩

• Autre publication scientifique

Advances in Historical Studies [Editor in Chief 12/3]

Raffaele Pisano

2023. ⟨hal-04510936⟩

• Article dans une revue

Topological vortex mode for flexural waves in pillared plates

Zhihui Wen, Julio Andrés Iglesias Martínez, Yabin Jin, Yan Li, Bahram Djafari-Rouhani, Daniel Torrent, Jean-Louis Raynaud, Abdelkrim Khelif

Localized topological modes with high robustness to various perturbations are receiving increasing attention. Recently, zero-order topological vortex modes have been designed in phononic structures, in analogy with zero-energy fermionic states modulated by Jackiw-Rossi binding mechanism. Such…

Materials & Design, 2023, 233, pp.112209. ⟨10.1016/j.matdes.2023.112209⟩. ⟨hal-04188368⟩

• Article dans une revue

Enhancing Magnetoelastic Coupling in Shear Surface Acoustic Waveguide Based on ST-Cut Quartz Substrate and Ni Thin Films With Uniaxial Magnetic Anisotropy Induced by Thermal Annealing

Othmane Marbouh, Aurelien Mazzamurro, Olivier Bou Matar, Nicolas Tiercelin, Yannick Dusch, Daniel Laloy, Khalid Ettihir, Abdelmounaim Tounzi, Abdelkader Benabou, Abdelkrim Talbi

In this study, we conduct a comprehensive investigation to enhance the performance of shear surface acoustic wave (SAW) magnetic sensors. We explore the interaction between SAW and a nickel film deposited on ST-cut quartz in a delay line configuration. The nickel film, measuring 2 mm in width and…

IEEE Sensors Letters, 2023, 7 (12), pp.2505504. ⟨10.1109/LSENS.2023.3330639⟩. ⟨hal-04324269⟩

• Article dans une revue

Memristor-Based Cryogenic Programmable DC Sources for Scalable In Situ Quantum-Dot Control

Pierre-Antoine Mouny, Yann Beilliard, Sébastien Graveline, Marc-Antoine Roux, Abdelouadoud El Mesoudy, Raphaël Dawant, Pierre Gliech, Serge Ecoffey, F. Alibart, Michel Pioro-Ladrière, Dominique Drouin

Current quantum systems based on spin qubits are controlled by classical electronics located outside the cryostat. This approach creates a major wiring bottleneck, which is one of the main roadblocks toward scalable quantum computers. Thus, we propose a scalable memristor-based programmable dc…

IEEE Transactions on Electron Devices, 2023, 70 (4), pp.1989-1995. ⟨10.1109/TED.2023.3244133⟩. ⟨hal-04053335⟩

• Article dans une revue

Highly stable fluorine-free slippery liquid infused surfaces

Anne-Sophie Vaillard, Manon Saget, Flavie Braud, Marc Lippert, Laurent Keirsbulck, Maude Jimenez, Yannick Coffinier, Vincent Thomy

A promising Slippery Liquid Infused Surface (SLIS) has been developed, that is both easy-to-produce and environmentally friendly. Using a double replication method, a 200 µm-thick texturized cross-linked PDMS film was obtained, leading to a grid of micrometric hills and deep wells. A comparison…

Surfaces and Interfaces, 2023, 42, Part A, pp.103296. ⟨10.1016/j.surfin.2023.103296⟩. ⟨hal-04215387⟩

• Article dans une revue

Martens hardness of Constantan thin films on (100) Si wafer: Improvement in contact area function in nanoindentation

Ayyoub Dziri, Alex Montagne, Francine Roudet, Katir Ziouche, Didier Chicot

This work presents a mechanical study by nanoindentation of Constantan thin films deposited by cathodic sputtering technique with an intermediate thin adhesion layer of titanium on a (100) silicon wafer substrate. A methodology based on a modified contact area function is proposed for a suitable…

Thin Solid Films, 2023, pp.139712. ⟨10.1016/j.tsf.2023.139712⟩. ⟨hal-03951065⟩

• Article dans une revue

Bio-based substrate for flexible electronics - application to a 2.45 GHz wearable patch antenna

Abdelghafour Sid, Pierre-Yves Cresson, Nicolas Joly, Flavie Braud, Tuami Lasri

In this paper, a bio-based and biocompatible polymer, Cellulose Laurate (CL), is proposed for flexible radiofrequency (RF) electronics. The synthesis of CL films together with their characterizations (chemical, thermal, mechanical and dielectric) are presented. The results obtained allow…

Materials Today Electronics, 2023, 5, pp.100049. ⟨10.1016/j.mtelec.2023.100049⟩. ⟨hal-04146482⟩

• Article dans une revue

Assignment Approach for Electric Vehicle Charging Using Traffic Data Collected by SUMO

Riham Farhani, Yassin El Hillali, Atika Rivenq, Yahia Boughaleb, Abdelowahed Hajjaji

Consumption habits are changing due to the development of new technologies around renewable energy, environmental awareness, and new incentive policies. Smart grids are seen as an effective way to accommodate more renewable energy, achieve better control of demand, and improve the operating…

World Electric Vehicle Journal, 2023, 14 (2), pp.40. ⟨10.3390/wevj14020040⟩. ⟨hal-04034398⟩