Publications

• Article dans une revue

Adhesive forces investigation on a silicon tip by contact mode atomic force microscope

Vincent Agache, Bernard Legrand, Dominique Collard, Lionel Buchaillot

An atomic force microscope operating in contact mode is used in this letter for probing the adhesive forces at the apex of a silicon nanotip with typical radius smaller than 15 nm, fabricated using a combination of high-resolution electron beam lithography and plasma dry etching. The amplitude of…

Applied Physics Letters, 2002, 81, pp.2623-2625. ⟨10.1063/1.1508806⟩. ⟨hal-00148768⟩

• Article dans une revue

Surface micro-machining : an overview

D. Collard, H. Fujita, H. Toshiyoshi, Bernard Legrand, L. Buchaillot

Nano et micro technologies, 2002, 2, pp.35-50. ⟨hal-00148781⟩

• Article dans une revue

Statics and dynamics in giant magnetostrictive TbxFe1-xFe0.6Co0.4 multilayers for MEMS

Jamal Ben Youssef, Nicolas Tiercelin, Fabienne Petit, Henri Le Gall, Vladimir Preobrazhensky, Philippe Pernod

IEEE Transactions on Magnetics, 2002, 38, pp.2817-2819. ⟨hal-00148689⟩

• Article dans une revue

Influence of the microstructure and of an ION beam etching on the domain propagation in PZT thin films

Brice Gautier, Caroline Soyer, Eric Cattan, Denis Remiens, Jean-Claude Labrune

PbZrTiO 3 (PZT) thin films have been grown by RF-magnetron sputtering and sputter etched by Argon ion beam. The topography of the bombarded material is studied by Atomic Force Microscope (AFM), several ferroelectric domains are created by applying a sufficiently high voltage between the tip of the…

Integrated Ferroelectrics, 2002, 50 (1), pp.231-240. ⟨10.1080/10584580215530⟩. ⟨hal-00149627⟩

• Article dans une revue

Fatigue crack monitoring of riveted aluminium strap joints by Lamb waves analysis and acoustic emission measuring techniques

Sébastien Grondel, Christophe Delebarre, Jamal Assaad, J.P. Dupuis, O. Reithler

NDT & E International, 2002, 35, pp.137-146. ⟨hal-00149901⟩

• Communication dans un congrès

Transient modeling of Lamb wave generation by surface bonded piezoelectric transducers

Laurent Duquenne, Emmanuel Moulin, Jamal Assaad, Christophe Delebarre

Since a few years, Lamb waves have been seriously considered as a potential technique for integrated damage assessment systems. Since they are easily propagated over long distances in plate-shaped structures and are able to interact with inner material defects, Lamb waves are seen indeed as a most…

European Workshop on Smart Structures in Engineering and Technology, May 2002, Giens, France. ⟨10.1117/12.508723⟩. ⟨hal-00149930⟩

• Communication dans un congrès

Stress field evaluation by Barkhausen noise on bearing raceway

S. Desvaux, J. Gualandri, Marc Duquennoy, Mohamed Ourak

2002, pp.1585-1590. ⟨hal-00149912⟩

• Article dans une revue

Acoustic microscopy measurement of elastic constants by using an optimization method on measured and calculated SAW velocities : effect of initial Cij values on the calculation convergence and influence of the LFI transducer parameters on the determination of the SAW velocity

Michael Lematre, Youssef Benmehrez, G. Bourse, Wei-Jiang Xu, Mohamed Ourak

The determination of elastic constants in anisotropic solids by line-focus acoustic microscopy (LFAM) is discussed. The velocity of leaky surface acoustic waves (SAWs) has been obtained for different directions of propagation (φ) from the V(z) curves. The elastic constants are determined from the…

NDT & E International, 2002, 35 (5), pp.279-286. ⟨10.1016/S0963-8695(01)00051-2⟩. ⟨hal-00149898⟩

• Article dans une revue

Bubble size distribution estimation via void rate dissipation in gas saturated liquid. Application to ultrasonic cavitation bubble fields

S. Labouret, J. Frohly

European Physical Journal: Applied Physics, 2002, 19, pp.39-54. ⟨hal-00149903⟩

• Article dans une revue

Characterization of mems devices using a polarisation interferometer

D. Jenkins, W. Clegg, X. Liu, E. Fribourg-Blanc, Eric Cattan

Integrated Ferroelectrics, 2002, 50, pp.91-99. ⟨hal-00149626⟩