Publications

• COMM

On the potentialities of architectured structures for underwater applications

Arthur Terroir, Charles Croënne, Jerome O. Vasseur, Mohamadd Ayad, Rachid Rahouadj, Jean-François Ganghoffer, Anne-Christine Hladky

Due to recent developments in additive manufacturing, architectured metamaterials with specific microstructure are widely studied due to the large range of available designs and corresponding effective properties. In this paper, a periodic structure based on a periodic arrangement designed by F.…

Forum Acusticum, Dec 2020, Lyon, France. pp.1155-1155, ⟨10.48465/fa.2020.0507⟩. ⟨hal-03240274⟩

• COMM

Near-field measurement and far-field characterization of a J-band antenna based on an electro-optic sensing

Shintaro Hisatake, Yusuke Tanaka, Cybelle Belem-Gonçalves, Cyril Luxey, Frédéric Gianesello, Guillaume Ducournau, Akihiko Hirata

In this paper, we present a near-field pattern measurement based on an electro-optic sensing at 300 GHz band. The measurement system is based on a self-heterodyne technique and non-polarimetric frequency down-conversion technique. The far-field radiation pattern of a horn antenna calculated from…

14th European Conference on Antennas and Propagation (EuCAP), Mar 2020, Copenhagen, Denmark. paper 9135318, 4 p., ⟨10.23919/EuCAP48036.2020.9135318⟩. ⟨hal-03322801⟩

• COMM

Application of the GPR and ERT methods for non-invasive examination of a flood dike

Tomislaw Golebiowski, Bogdan Piwakowski, Michal Cwiklik

As part of the NAWA-EMMAT project, geophysical surveys were carried out on selected sites in Poland, i.e. on the flood dike and in the surrounding of the concrete water dam. The goal of the surveys was the non-invasive detection of loose zones in the flood dike and fractured zones located in the…

9th Scientific-Technical Conference on E-mobility, Sustainable Materials and Technologies (MATBUD), Oct 2020, Cracow, Poland. pp.01010, ⟨10.1051/matecconf/202032201010⟩. ⟨hal-03322808⟩

• COMM

On the teaching mode in online course of MEMS fundamental theory

Jinying Zhang, Wei-Jiang Xu, Xianmei Wu, Zhuo Li, Xin Wang, Suhui Yang

Massive offline courses have been transferred to online in higher education reform all over the world. This paper presents a teaching mode integrated with finite element numerical simulation in the fundamental theory study in MEMS (Micro-Electro-Mechanical Systems) online course for the graduate…

International Conference on Teaching, Assessment, and Learning for Engineering (IEEE TALE 2020), Dec 2020, Takamatsu, Japan. ⟨10.1109/TALE48869.2020.9368413⟩. ⟨hal-03322815⟩

• ART

Historical foundations of physics & applied technology as dynamic frameworks in pre-service STEM

Raffaele Pisano, Philippe Vincent, Kosta Dolenc, Mateja Ploj Virtic

In recent decades, the development of sciences and technologies had a significant impact in society. This impact has been object of analysis from several standpoints, i.e., scientific, communication, historical and anthropological. Consequently, serious changes were required by the society. One of…

Foundations of Science, 2020, 30 p. ⟨10.1007/s10699-020-09662-4⟩. ⟨hal-03321533⟩

• ART

Experimental characterization of three-dimensional Graphene’s thermoacoustic response and its theoretical modelling

Zhi Lin Ngoh, Pierre Guiraud, Dunlin Tan, Stefano Giordano, Olivier Bou Matar, Edwin Hang Tong Teo, Philippe Pernod, Philippe Coquet, Raphael Lardat

In the past decade, a lot of research has been conducted on the potential of carbon nanostructured materials to emit sound via thermoacoustics through both simulations and experiments. However, experimental validation of simulations for three-dimensional graphene (3D-C), which has a complicated 3D…

Carbon, 2020, 169, pp.382-394. ⟨10.1016/j.carbon.2020.06.045⟩. ⟨hal-02947956⟩

• ART

Integrating yard, network and optimisation models towards real-time optimisation of rail freight yard operations

Riccardo Licciardello, Norbert Adamko, Samuel Deleplanque, Pierre Hosteins, Ronghui Liu, Anders Peterson, Magnus Wahlborg, Milos Zat'Ko, Paola Pellegrini

This paper describes the state of advancement achieved in the OptiYard research project in the use of optimisation algorithms in interaction with microsimulation of the rail-yard and surrounding network towards real-time yard management and communication with the network. Two case studies, a hump…

Ingegneria Ferroviaria, 2020, 6, 21p. ⟨hal-02951523⟩

• COMM

Effects of the electrical limit conditions on the electromechanical behavior of piezoelectric transducer arrays

Abdelmajid Bybi, Adil Ammar, Mohammed Garoum, Sébastien Grondel, Ahmed Mzerd, Anne-Christine Hladky

Crosstalk is an undesirable phenomenon having a negative impact on the electroacoustic performance of ultrasonic transducer arrays, utilized in medical imaging and NDT applications. Indeed, when one element of a transducer array is excited, it generates parasitic voltages and/or displacement fields…

4th International Conference on Electrical and Information Technologies, ICEIT 2020, Mar 2020, Rabat, Morocco. pp.1-6, ⟨10.1109/ICEIT48248.2020.9113231⟩. ⟨hal-03209107⟩

• COMM

[Invited] Texturation of lead-free BaTiO₃ based piezoelectric ceramics

Pascal Marchet, Angel Prato, Franck Levassort, Claire Bantignies, Ana Borta-Boyon, Anne-Christine Hladky

Piezoelectric ceramics have been integrated for a long time in a widerange of devices, particularly in ultrasonic applications (sonar systems,medical imaging...) and most of them use Pb(Zr,Ti)O₃ (PZT) materials.However, due to health care and environmental problems, lead…

• ART

Utilisation du silicium nanostructuré dans un générateur thermoélectrique pour la réduction des pertes thermiques

Katir Ziouche, Ibrahim Bel-Hadj, Zahia Bougrioua

Dans cet article, nous présentons des microgénérateurs thermoélectriques (μTEG) planaires réalisés en technologie Silicium compatible CMOS, et destinés à la récupération de toute forme d’énergie thermique. Ceux-ci utilisent des matériaux faible coût, abondants et respectueux de l’environnement. La…, In this paper, we present a planar thermoelectric microgenerator (μTEG) based on CMOS-compatible silicon technology to harvest all forms of thermal energy. These have made by using low cost, abundant and eco-friendly materials. The heat harvesting has performed with a silicon concentrator. The…

Entropie : thermodynamique – énergie – environnement – économie, 2020, 1 (1), 10 p. ⟨10.21494/ISTE.OP.2020.0493⟩. ⟨hal-02906722⟩