Publications

• Article dans une revue

Theoretical and experimental analyses of tunable Fabry-Perot resonators using piezoelectric phononic crystals

Marie-Fraise Ponge, Bertrand Dubus, Christian Granger, Jerome O. Vasseur, Mai Pham Thi, Anne-Christine Hladky

Theoretical and experimental analyses of piezoelectric stacks submitted to periodical electrical boundary conditions via electrodes are conducted. The presented structures exhibit Bragg band gaps that can be switched on or off by setting electrodes in short or open circuit. The band gap frequency…

IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 2015, 62 (6), pp.1114-1121. ⟨10.1109/TUFFC.2014.006919⟩. ⟨hal-03300133⟩

• Communication dans un congrès

Characterization of flexible CMOS technology tranferred onto a metallic foil

Justine Philippe, Aurelien Lecavelier Des Etangs-Levallois, Philip Latzel, Francois Danneville, J.F. Robillard, Daniel Gloria, Emmanuel Dubois

In this work we demonstrate a method to transfer high-performance industrial CMOS circuits thinned down to 5.7 mu m and bond onto a 25-mu m-thick stainless steel foil with a 800-nm-thick indium layer. The bonding is performed at the temperature of 100 degrees C with an applied pressure of 1.2 bar.…

2015 Joint International EUROSOI Workshop and International Conference on Ultimate Integration on Silicon, Jan 2015, Bologna, Italy. ⟨10.1109/ULIS.2015.7063747⟩. ⟨hal-03272691⟩

• Article dans une revue

The beginnings of plasmomechanics : towards plasmonic strain sensors

Thomas Maurer, Joseph Marae Djouda, Ugo Cataldi, Arthur Gontier, Guillaume Montay, Yazid Madi, Benoît Panicaud, Demetrio Macías, Pierre-Michel Adam, Gaëtan Lévêque, Thomas Bürgi, Roberto Caputo

This article exposes the beginnings of a new field which could be named as “plasmomechanics”. Plasmomechanics comes from the convergence between mechanics and plasmonics. Here we discuss a relatively recent topic whose technological aim is the development of plasmonic strain sensors. The idea is…

Frontiers of Materials Science in China, 2015, 9 (2), pp.170-177. ⟨10.1007/s11706-015-0290-z⟩. ⟨hal-01286265⟩

• Communication dans un congrès

When capacitive transduction meets the thermomechanical limit: Towards femto-newton force sensors at very high frequency

S. Houmadi, Bernard Legrand, J.P. Salvetat, B. Walter, E. Mairiaux, J.P. Aime, D. Ducatteau, P. Merzeau, L. Buisson, J. Elezgaray, Didier Theron, Marc Faucher

We show that the capacitive transduction of a MEMS device using a setup based on a microwave detection scheme achieves the measurement of the thermomechanical noise spectrum of a high-frequency (>10 MHz) high-stiffness (>10 5 N/m) resonator, reaching the outstanding displacement resolution of…

28th IEEE Conference on Micro Electro Mechanical Systems, MEMS 2015, Jan 2015, Estoril, Portugal. ⟨10.1109/MEMSYS.2015.7050908⟩. ⟨hal-01962374⟩

• Article dans une revue

Modelling based on Spatial Impulse Response Model for Optimization of Inter Digital Transducers (SAW Sensors) for Non Destructive Testing

Dame Fall, Marc Duquennoy, Mohammadi Ouaftouh, Bogdan Piwakowski, Frédéric Jenot

This study deals with modelling SAW-IDT transducers for their optimization. These sensors are specifically developed to characterize properties of thin layers, coatings and functional surfaces. Among the methods of characterization, the ultrasonic methods using Rayleigh surface waves are…

Physics Procedia, 2015, Proceedings of the 2015 ICU International Congress on Ultrasonics, Metz, France, 70, pp.927-931. ⟨10.1016/j.phpro.2015.08.192⟩. ⟨hal-03810639⟩

• Article dans une revue

A distributed antenna system for indoor accurate WiFi localization

Christophe Loyez, Michael Bocquet, C. Lethien, N. Rolland

Specific infrastructures are a key challenge for indoor geo-localization systems. In particular, an accurate narrowband localization technique using 802.11 g WiFi signals is proposed in this letter. The related system architecture is built on the basis of radio over fiber topology of distributed…

IEEE Antennas and Wireless Propagation Letters, 2015, 14, pp.1184-1187. ⟨10.1109/LAWP.2015.2396901⟩. ⟨hal-03561323⟩

• Article dans une revue

Sound generation by non-synchronously oscillating rotor blades in turbomachinery

Di Zhou, Xiaoyu Wang, Jun Chen, Xiaodong Jing, Xiaofeng Sun

In this paper, the sound generation by non synchronously oscillating rotor blades in axial compressor is investigated with emphasis on establishing an analytical model for the corresponding sound field inside an annular duct. In terms of the present model, it is found that the acoustic frequency…

Journal of Sound and Vibration, 2015, 355, pp.150-171. ⟨10.1016/j.jsv.2015.06.018⟩. ⟨hal-01348664⟩

• Article dans une revue

Wafer-scale fabrication of self-actuated piezoelectric nanoelectromechanical resonators based on lead zirconate titanate (PZT)

Denis Dezest, Olivier Thomas, Fabrice Mathieu, Laurent Mazenq, Caroline Soyer, Jean Costecalde, Denis Remiens, Jean-François Deü, Liviu Nicu

In this paper we report an unprecedented level of integration of self-actuated nanoelectromechanical system (NEMS) resonators based on a 150 nm thick lead zirconate titanate (PZT) thin film at the wafer-scale. A top-down approach combining ultraviolet (UV) lithography with other standard planar…

Journal of Micromechanics and Microengineering, 2015, 25 (3), pp.35002-35013. ⟨10.1088/0960-1317/25/3/035002⟩. ⟨hal-01169283⟩

• Article dans une revue

The Geometrical Foundation of Federigo Enriques’ Gnoseology and Epistemology

Paolo Bussotti, Raffaele Pisano

Advances in Historical Studies, 2015, 04 (02), pp.118-145. ⟨10.4236/ahs.2015.42012⟩. ⟨hal-04507571⟩

• Autre publication scientifique

Advances in Historical Studies [Editor in Chief 4/1]

Raffaele Pisano

2015. ⟨hal-04511040⟩