Agenda Noticias

Publicaciones

Tipo de Documento

Palabras clave

Autor

De

Au

Affichage de 1391 à 1400 sur 6562

Communication dans un congrès

Role of green building developer and owner in sustainability construction: investigating the relationships between green building key success factors and incentives

Mohammed Ali Berawi, Van Basten, Yusuf Latief, Igor Crevits

Adaptation to the concept of sustainability is a problem in developing countries, especially in terms of the level of knowledge, economic capability, environmental conditions, and regional policies. These four aspects become exogenous variables in this study to examine the role of green building...

3rd International Conference on Eco Engineering Development (ICEED 2019), Nov 2019, Solo City, Indonesia. pp.1-9, ⟨10.1088/1755-1315/426/1/012061⟩. ⟨hal-03382663⟩

Communication dans un congrès

Green building incentive model during design recognition to ensure the reliability of green building operation and maintenance achievement

Mohammed Ali Berawi, Van Basten, Yusuf Latief, Igor Crevits

A low number in green building development cause the building construction will have an immense direct and indirect impact on future generations. This paper identified the optimum incentive model driving the building efficiency achievement in green building operation and maintenance. Critical...

3rd International Conference on Eco Engineering Development, Nov 2019, Solo City, Indonesia. pp.1-10, ⟨10.1088/1755-1315/426/1/012020⟩. ⟨hal-03382649⟩

Article dans une revue

Energy management of hybrid vehicles with state constraints: A penalty and implicit Hamiltonian minimization approach

Marcelino Sanchez Pantoja, Sebastien Delprat, Theo Hofman

When designing hybrid vehicles, the energy management is formulated as an optimal control problem. The Pontryagin’s minimum principle represents a powerful methodology capable of solving the energy management offline. Moreover, the Pontryagin’s minimum principle has been proved useful in the...

Applied Energy, 2020, 260, pp.114149. ⟨10.1016/j.apenergy.2019.114149⟩. ⟨hal-03642865⟩

Article dans une revue

Comparative analysis of various techniques to improve the performance of novel wheat germ oil – an experimental study

Edwin Geo Varuvel, C. Prabhu, Shanmugam Thiyagarajan, T. Maiyalagan, Fethi Aloui

The current study aims to explore the opportunities of using the high viscous biofuel namely Wheat Germ oil (WGO) in a twin cylinder CI engine. High viscous fuels suffer from improper atomization leading to poor combustion and higher smoke emission. To address this problem, various techniques...

International Journal of Hydrogen Energy, 2020, 45 (9), pp.5745-5756. ⟨10.1016/j.ijhydene.2019.05.198⟩. ⟨hal-03440792⟩

Article dans une revue

Numerical simulation of water spray transport along a plate of a heat exchanger

Nihel Grich, Walid Foudhil, Souad Harmand, Sadok Ben Jabrallah

Water spraying is widely being used in many industrial applications because of the benefits it has shown over cooling. This paper presents a numerical investigation to simulate evaporating water spray along a plate of an exchanger. Indeed, we were interested in a horizontal channel whose lower wall...

Journal of Thermal Analysis and Calorimetry, 2020, 143 (5), pp.3887-3895. ⟨10.1007/s10973-020-09356-w⟩. ⟨hal-03442197⟩

Thèse

Characterization of the CBN wheel wear and modelling of its effect in NGV grinding, Caractérisation de l'usure de meules CBN et modélisation de son effet sur la certification de pièces aéronautiques NGC

Gorka Vidal Irusta

This thesis is focused on improving a paramount grinding process used in the aeronauticindustry. The process is one of the last manufacturing steps of the nozzle guide vanes, whichform the stator of the exhaust of aeroengines. The enhanced physical properties of thematerials which these components..., Cette thèse est axée sur l'amélioration d'un procédé de rectification primordial utilisé dans l'industrie aéronautique. Ce procédé est l'une des dernières étapes de fabrication des aubes directrices des tuyères, qui forment le stator de l'échappement des moteurs d'...

Mechanics [physics.med-ph]. Université Polytechnique Hauts-de-France; Institut national des sciences appliquées Hauts-de-France, 2020. English. ⟨NNT : 2020UPHF0006⟩. ⟨tel-04235507⟩

Thèse

Characterization of the CBN wheel wear and modelling of its effect in NGV grinding, Caractérisation de l'usure de meules CBN et modélisation de son effet sur la certification de pièces aéronautiques NGC

Marc Vervel

This thesis is focused on improving a paramount grinding process used in the aeronauticindustry. The process is one of the last manufacturing steps of the nozzle guide vanes, whichform the stator of the exhaust of aeroengines. The enhanced physical properties of thematerials which these components..., Cette thèse est axée sur l'amélioration d'un procédé de rectification primordial utilisé dans l'industrie aéronautique. Ce procédé est l'une des dernières étapes de fabrication des aubes directrices des tuyères, qui forment le stator de l'échappement des moteurs d'...

Mechanics [physics.med-ph]. Université Polytechnique Hauts-de-France; Universidad del País Vasco, 2020. English. ⟨NNT : 2020UPHF0006⟩. ⟨tel-04235429⟩

Thèse

Pas spécialement poétique, Not especially poetic

François Lacire

La poésie parle de poésie ; les poètes parlent aux poètes. Ces évidences sont celles de la Modernité poétique, qui entérine à la fois les licences de la poésie, les missions du poète et leur cantonnement. Or, lorsque Nathalie Quintane, au dos de Chaussure (1997), écrit qu’elle entend « parle[r]..., Poetry talks about poetry; poets speak to poets. These have become self-evident tenets of a poetic modernity that has at once claimed a specific license for poetry and specific missions for the poet, and assumed their privileged isolation. When Nathalie Quintane writes on the back cover of...

Sciences de l'Homme et Société. Université Polytechnique Hauts-de-France, 2020. Français. ⟨NNT : 2020UPHF0002⟩. ⟨tel-03371205⟩

Chapitre d'ouvrage

Application of a T-S unknown input observer for studying sitting control for people living with spinal cord injury

Mathias Blandeau, Thierry-Marie Guerra, Philippe Pudlo

The existing models for studying sitting stability are not valid to estimate internal forces and torques for people living with a complete spinal cord injury who will use their upper limbs instead of their lower back and abdominal muscle. The aim of this work is to design an unknown input observer...

Control Applications for Biomedical Engineering Systems, Elsevier, pp.169-195, 2020, 978-012817461-6. ⟨10.1016/B978-0-12-817461-6.00007-X⟩. ⟨hal-03403912⟩

Thèse

Jazz et chanson des années trente à la fin du XXe siècle, Jazz and French song since the Thirties to the end of the late twentieth century

Colette Lucidarme

Cette étude a pour ambition de cerner la sensibilité esthétique qui s’est développée dans la chanson française depuis le début des années trente au contact des différentes formes de jazz. L’arrivée en France, dès la fin de la Première Guerre mondiale, de nouveaux genres musicaux venus d’Amérique..., The present thesis explores the aesthetic sensibility developed in French song as of the early thirties through its contact with different forms of jazz. The change that occurred in France after the Great War, mainly due to new musical genres coming from America, shook the European artistic scene,...

Sciences de l'Homme et Société. Université Polytechnique Hauts-de-France, 2020. Français. ⟨NNT : 2020UPHF0004⟩. ⟨tel-03373514⟩