Publicaciones

• Chapitre d'ouvrage

Void Fraction Influence Over Aqueous Foam Flow: Wall Shear Stress and Core Shear Evolution

Rogelio Chovet, Fethi Aloui

In this study, the two main transport characterization problems of the foam flow are studied: foam flow stability, through the evolution of the velocity at the core of the foam, and rheology, with the study of the wall shear stress over the lateral walls, for different void fractions. The same...

Progress in Clean Energy Volume 1 Analysis and Modeling, Springer International Publishing, pp.909-931, 2015, ⟨10.1007/978-3-319-16709-1_66⟩. ⟨hal-03579829⟩

• Article dans une revue

A Method to Compute Efficient 3d Helicopters Flight Trajectories Based on a Motion Polymorph-Primitives Algorithm

Konstanca Nikolajevic, Nicolas Belanger, David Duvivier, Rabie Ben Atitallah, Abdelhakim Artiba

Finding the optimal 3D path of an aerial vehicle under flight mechanics constraints is a major challenge, especially when the algorithm has to produce real time results in flight. Kinematics models and Pythagorian Hodograph curves have been widely used in mobile robotics to solve this problematic....

International Journal of Computer, Electrical, Automation, Control and Information Engineering, 2015, 9 (8), pp.1931-1939. ⟨10.5281/zenodo.1338542⟩. ⟨hal-03402081⟩

• Article dans une revue

Synaesthetics and Laurence Sterne’s Fiction

Brigitte Friant-Kessler

Interfaces : image, texte, language, 2015, 36, pp.143-160. ⟨10.4000/interfaces.236⟩. ⟨hal-03236897⟩

• Communication dans un congrès

Dynamic behavior and failure of the base and heat affected materials of a HSS fillet welded joint

Julien Carrier, Eric Markiewicz, Grégory Haugou, David Lebaillif, Nicolas Leconte, Hakim Naceur

Welded joints, due to their manufacturing process, are commonly weakened areas. This study analyses the dynamic behavior of the Base Metal (BM) and the Heat-Affected Zone (HAZ) materials of a HSS (High Strength Steel) fillet welded joint. First, a specific approach is developed to generate the HAZ...

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.05011, ⟨10.1051/epjconf/20159405011⟩. ⟨hal-03433914⟩

• Chapitre d'ouvrage

René Valin

Solange Ségala de Carbonnières

Dictionnaire historique des juristes français : XIIe-XXe siècle, PUF, 2015, 978-2-13-060902-5. ⟨hal-02938589⟩

• Communication dans un congrès

Exploitation of the reverberant propagation of elastic waves in structures : towards a concept of low-resource SHM sensor network

Emmanuel Moulin, Farouk Benmeddour, Hossep Achdjian, Lynda Chehami, Jamal Assaad, Julien de Rosny, Claire Prada

Actual implementation of an efficient SHM system is necessarily hampered by the constraints of power-consumption and intrusive- ness (weight, size, in-service integration) of sensors. In the field of ultrasound-based SHM, conventional methods rely on relatively powerful acoustic sources...

International Congress on Ultrasonics, ICU 2015, May 2015, Metz, France. pp.618-621, ⟨10.1016/j.phpro.2015.08.038⟩. ⟨hal-04087497⟩

• Article dans une revue

Identification of lubrication regime on textured surfaces by multi-scale decomposition

Cédric Hubert, Krzysztof Kubiak, Maxence Bigerelle, André Dubois, Laurent Dubar

This paper focuses on the analysis of surfaces resulting from thickness reduction of aluminium strips, provided with lubricant reservoirs, and deformed with different lubricant viscosities and drawing velocities, by a specific experimental drawing process. During reduction, the lubricant is...

Tribology International, 2015, 82, Part B, pp.375-386. ⟨10.1016/j.triboint.2014.04.035⟩. ⟨hal-03451016⟩

• Communication dans un congrès

Optimization of high frequency 45 degrees acoustic mirrors for lab on chip applications

Sizhe Li, Julien Carlier, Fabrice Lefebvre, Pierre Campistron, Dorothée Debavelaere-Callens, Georges Nassar, Bertrand Nongaillard

Ultra high frequency (similar to 1GHz) ultrasonic bulk acoustic waves (BAW) characterization has been already integrated in a lab-on-a-chip silicon platform. The acoustic wave guided in three dimensions (3D) was achieved via 45 degrees mirrors in a silicon wafer and applied for the characterization...

2015 ICU International Congress on Ultrasonics, May 2015, Metz, France. pp.918-922, ⟨10.1016/j.phpro.2015.08.190⟩. ⟨hal-03280234⟩

• Communication dans un congrès

A ROBOTICS EXPERIENCE WITH MOOC

Jean-Charles Canonne, Jean-Paul Becar, Aurel Fratu, Mariana Fratu

Since a couple of decades, authors are running towards the vanishing student motivations. They have applied a large amount of teaching tools or methods as the slide rule, overhead projector, programmable calculator, software, internet, moodle and supervised projects. Project based learning is one...

ICERI 2015, Nov 2015, SEVILLE, Spain. ⟨hal-02513151⟩

• Article dans une revue

Characterization of the generalized Calabi composition of affine hyperspheres

M. Antic, Z. Hu, C. C. Li, Luc Vrancken

In this paper, continuing with Hu-Li-Vrancken and the recent work of Antie-Dillen-Schoels Vrancken, we obtain a decomposition theorem which settled the problem of how to determine whether a given locally strongly convex affine hypersurface can be decomposed as a generalized Calabi composition of...

Acta Mathematicae Applicatae Sinica, 2015, 31 (10), pp.1531-1554. ⟨10.1007/s10114-015-4431-1⟩. ⟨hal-03233620⟩