Publicaciones

• COMM

Quantitative analysis of galling in cold forging of a commercial Al-Mg-Si alloy

Kevin Le Mercier, Mirentxu Dubar, Katia Mocellin, André Dubois, Laurent Dubar

Multiple upsetting-sliding tests are performed at sliding velocities in the range of 20-200 mm.s-1 and at different plastic deformations to reproduce the local contact conditions experienced at the tool/workpiece interface during cold forging of a 6082 aluminium alloy. An original approach, able to...

International Conference on the Technology of Plasticity, ICTP 2017, Sep 2017, Cambridge, United Kingdom. pp.2298 - 2303, ⟨10.1016/j.proeng.2017.10.998⟩. ⟨hal-01667931⟩

• ART

Iterative aggregation and disaggregation algorithm for pseudo-polynomial network flow models with side constraints

François Clautiaux, Said Hanafi, Rita Macedo, Marie-Emilie Voge, Cláudio Alves

This paper develops a general solution framework based on aggregation techniques to solve NP-Hard problems that can be formulated as a circulation model with specific side constraints. The size of the extended Mixed Integer Linear Programming formulation is generally pseudo-polynomial. To...

European Journal of Operational Research, 2017, 258, pp.467 - 477. ⟨10.1016/j.ejor.2016.09.051⟩. ⟨hal-01410170v2⟩

• ART

Passive control of deep cavity shear layer flow at subsonic speed

Mouhammad El Hassan, Laurent Keirsbulck

Passive control of the flow over a deep cavity at low subsonic velocity is considered in the present paper. The cavity length-to-depth aspect ratio is L/H = 0.2. particle image velocimetry (PIV) measurements characterized the flow over the cavity and show the influence of the control method on the..., Nous prenons ici en considération le contrôle passif d’un écoulement à faible vitesse subsonique sur une cavité. Le rapport longueur à profondeur de la cavité est L/H = 0.2. Les mesures de vélocimétrie par image de particule caractérisent l’écoulement au dessus de la cavité et montrent l’influence...

Canadian Journal of Physics, 2017, 95 (10), pp.894-899. ⟨10.1139/cjp-2016-0822⟩. ⟨hal-03451798⟩

• ART

Methodology for ballistic blunt trauma assessment

Anthony Bracq, Christophe Maréchal, Rémi Delille, Benjamin Bourel, Sébastien Roth, Olivier Mauzac

Computer Methods in Biomechanics and Biomedical Engineering, 2017, 20 (sup1), pp.31-32. ⟨10.1080/10255842.2017.1382846⟩. ⟨hal-03451383⟩

• ART

New complexity results on scheduling problem in a robotic cell

Nacira Chikhi, Moncef Abbas, Rachid Benmansour, Said Hanafi

This paper explores the coordinated scheduling problem between production and transportation in a two stage flow shop with dedicated machines. There are two dedicated machines at the first stage and one common machine at the second stage. Each job has to be processed on a specified machine at the...

RAIRO - Operations Research, 2017, 51 (3), pp.749-762. ⟨10.1051/ro/2016053⟩. ⟨hal-03402259⟩

• ART

SOMC-designed silica supported tungsten oxo imidazolin-2-iminato methyl precatalyst for olefin metathesis reactions

Z.S. Qureshi, Ahmed Hamieh, S. Barman, N. Maity, M.K. Samantaray, S. Ould-Chikh, E. Abou-Hamad, L. Falivene, V. d'Elia, A. Rothenberger, I. Llorens, Jean-Louis F Hazemann, J.M. Basset

Synthesis, structure, and olefin metathesis activity Of a surface complex [( Si-O-)W(= O)(cH(3))(2)-Im(Dipp)N] (4) (Im(Dipp) = 1,3-bis(2,6-diiSopropylphenyl)-imidazolin-2-iminato) supported on silica by a surface organometallic chemistry (SOMC) approach are reported. The reaction of N-Silylated 2-...

Inorganic Chemistry, 2017, 56 (2), pp.861-871. ⟨10.1021/acs.inorgchem.6b02424⟩. ⟨hal-01471653⟩

• ART

A co-opetitive framework for the hub location problems in transportation networks

Rahimeh Neamatian Monemi, Shahin Gelareh, Said Hanafi, Nelson Maculan

In this paper, we present the first model of co-opetition for a Hub Location Problem between two logistics service provider (LSPs) companies where the mother company is the owner of infrastructure. The LSPs would like to cooperate with each other by establishing joint edges with limited capacities...

Optimization, 2017, 66 (12), pp.2089-2106. ⟨10.1080/02331934.2017.1295045⟩. ⟨hal-03402109⟩

• ART

AS8‐static random access memory (SRAM): asymmetric SRAM architecture for soft error hardening enhancement

Ihsen Alouani, Mahmoud Elsharkasy Wael, Ahmed Eltawil, Fadi Kurdahi, Smail Niar

Soft errors in semiconductor memories occur due to charged particle strikes on sensitive nodes. Technology and voltage scaling increased dramatically the susceptibility of static random access memories (SRAMs) to soft errors. In this study, the authors present AS8-SRAM, a new asymmetric memory cell...

IET Circuits, Devices & Systems, 2017, 11 (1), pp.89-94. ⟨10.1049/iet-cds.2015.0318⟩. ⟨hal-03402367⟩

• COMM

Quantification de l'usure adhésive en mise en forme à froid d'un alliage Al-Mg-Si

Kevin Le Mercier, Mirentxu Dubar, Katia Mocellin, André Dubois, Laurent Dubar

Le forgeage à froid est un procédé de mise en forme permettant de réaliser des pièces aux formes proches de celles du produit fini avec une cadence de production élevée. La mise en forme du matériau est réalisée à température ambiante. Les pièces produites présentent des états de surface de bonne...

CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France. ⟨hal-03465707⟩

• COMM

Comparative Evaluation? Yes, But With Which Alternative UI?

Hayet Hammami, Gaëlle Calvary, Meriem Riahi, Faouzi Moussa, Sarah Bouzit

User’s feedback provides valuable information suitable to help designers to improve their work. In this paper, we present a study on user’s feedback when evaluating a User Interface (UI) by comparison. Our aim is to define the properties that the alternative UI must satisfy to maximize the benefits...

Electronic Visualisation and the Arts (EVA 2017), Jul 2017, Sunderland, United Kingdom. pp.32:1-32:7, ⟨10.14236/ewic/HCI2017.105⟩. ⟨hal-03223718⟩