Publicaciones

• Article dans une revue

Experimental analysis to reduce CO2 and other emissions of CRDI CI engine using low viscous biofuels

Edwin Geo Varuvel, Guillaume Fol, Fethi Aloui, Shanmugam Thiyagarajan, M. Jerome Stanley, Ankit Sonthalia, Kathirvel Brindhadevi, C. G. Saravanan

It is the need of the hour to quell the enormous demand of fossil fuels by extending the horizon towards Low Viscous Biofuels. An experimental investigation was carried out to study the performance of the diesel engine, its combustion behaviour and emission aspects while operating it with biofuels...

Fuel, 2021, 283, pp.118829. ⟨10.1016/j.fuel.2020.118829⟩. ⟨hal-03536742⟩

• Article dans une revue

CO2 reduction in a common rail direct injection engine using the combined effect of low carbon biofuels, hydrogen and a post combustion carbon capture system

Edwin Geo Varuvel, Shanmugam Thiyagarajan, Ankit Sonthalia, T. Prakash, Sary Awad, Fethi Aloui, Arivalagan Pugazhendhi

The transportation sector is a major emitter of carbon dioxide emissions. It is a known fact that carbon dioxide is the cause of global warming which has resulted in extreme weather conditions as well as climate change. In this study a combination of different methods of expediting the CO2 emission...

Energy Sources, Part A, 2021, pp.1-20. ⟨10.1080/15567036.2021.1974128⟩. ⟨hal-03534331⟩

• Article dans une revue

Numerical Investigation of Short Elliptical Twisted Tube for Reduced Fouling Rate in Steam Cracking Furnaces

Bruce Indurain y Urricelqui, François Beaubert, David Uystepruyst, Sylvain Lalot, Mathieu Couvrat

In the steam cracking industry of natural gas or naphtha, fouling of tubular heat exchangers by cokes is a major issue. This growing carboneous layer has two major negative effects: 1) it increases pressure drop and 2) reduces heat transfer from the tube wall to the processed fluid. Using the open-...

Heat Transfer Engineering, 2021, pp.1-12. ⟨10.1080/01457632.2021.1963536⟩. ⟨hal-03534362⟩

• Communication dans un congrès

Approach for CAD model reconstruction basing on 3D points insertion and surface approximation

Aicha Ben Makhlouf, Nessrine Elloumi, Borhen Louhichi, Dominique Deneux

Reverse engineering (RE) consists in the reconstruction of a geometric model of a 3D object from a set of points, a mesh or a 3D triangulation. This model is a combination of geometric primitives (cylinders, planes, spheres, etc.) and complex surfaces (B-Spline, NURBS…) defined by parameters that...

25th International Conference Information Visualisation (IV), Jul 2021, Sydney, Australia. pp.310-319, ⟨10.1109/IV53921.2021.00057⟩. ⟨hal-03531029⟩

• Rapport

Caractérisation tribologique de peintures pour des applications automobiles

André Dubois, Philippe Moreau

[Research Report] MADER; VALUTEC; LAMIH, Université Polytechnique des Hauts-de-France. 2021. ⟨hal-03438901⟩

• Article dans une revue

Scheduling trucks and storage operations in a multiple-door cross-docking terminal considering multiple storage zones

Tarik Chargui, Abdelghani Bekrar, Mohamed Reghioui, Damien Trentesaux

Cross-docking is a logistics process in which products are unloaded through receiving docks and then transferred to shipping docks with almost no storage in between. In this paper, a mixed integer linear programming model (MILP) is proposed to optimise the scheduling, storage, assignment and...

International Journal of Production Research, 2021, pp.1-25. ⟨10.1080/00207543.2020.1853843⟩. ⟨hal-03426523⟩

• Article dans une revue

A scalable dynamic parking allocation framework

Marko Mladenovic, Thierry Delot, Gilbert Laporte, Christophe Wilbaut

Cities suffer from high traffic c ongestion of which one of the main causes is the unorganized pursuit for available parking. Apart from traffic congestion, the blind search for a parking slot causes financial and environmental losses. We consider a general parking allocation scenario in which the...

Computers and Operations Research, 2021, 125, pp.105080. ⟨10.1016/j.cor.2020.105080⟩. ⟨hal-03396437⟩

• Proceedings/Recueil des communications

Service Oriented, Holonic and Multi-Agent Manufacturing Systems for Industry of the Future

Theodor Borangiu, Damien Trentesaux, Paulo Leitão, Olivier Cardin, Samir Lamouri

The scientific theme of the book concerns “Manufacturing as a Service (MaaS)” which is developed in a layered cloud networked manufacturing perspective, from the shop floor resource sharing model to the virtual enterprise collaborative model, by distributing the cost of the manufacturing...

Studies in Computational Intelligence, 952, Springer International Publishing, 2021, Studies in Computational Intelligence, 978-3-030-69373-2. ⟨10.1007/978-3-030-69373-2⟩. ⟨hal-03171458⟩

• Article dans une revue

Cascade Descriptor Observers: Application to Understanding Sitting Control of Persons Living With Spinal Cord Injury

Hajer Srihi, Thierry-Marie Guerra, Tran Anh-Tu Nguyen, Philippe Pudlo, Antoine Dequidt

People with spinal cord injury (SCI) suffer from a drastic reduction in sitting stability which negatively impacts their postural control. Thus, sitting balance becomes one of the most challenging everyday exercises. To better understand the consequences of this pathology, we have to work with high...

Frontiers in Control Engineering, 2021, 2, pp.710271. ⟨10.3389/fcteg.2021.710271⟩. ⟨hal-03426286⟩

• Communication dans un congrès

Performance prediction for convolutional neural networks on edge GPUs

Halima Bouzidi, Hamza Ouarnoughi, Smail Niar, Abdessamad Ait El Cadi

Edge computing is increasingly used for Artificial Intelligence (AI) purposes to meet latency, privacy, and energy challenges. Convolutional Neural networks (CNN) are more frequently deployed on Edge devices for several applications. However, due to their constrained computing resources and energy...

18th ACM International Conference on Computing Frontiers (CF'21), ACM, May 2021, Catane, Italy. pp.54-62, ⟨10.1145/3457388.3458666⟩. ⟨hal-03379997⟩