Publicaciones

• Communication dans un congrès

Train timetable rearrangement facing infrastructure maintenance activities

Luis Diego Arenas Pimentel, Paola Pellegrini, Said Hanafi, Joaquin Rodriguez

Maintenance activities are necessary to maintain the functionality of the railway infrastructure. Commonly, the maintenance activities are planned first. Then, the timetable is elaborated respecting the unavailability periods caused by the former. However, unplanned maintenance activities may have...

ROADEF 2017, 18ème conférence de la Société française de Recherche Opérationnelle et d'Aide à la Décision, Feb 2017, Metz, France. 2p. ⟨hal-01469801v2⟩

• Chapitre d'ouvrage

Foreword

Tim A. Majchrzak, Paolo Traverso, Karl-Heinz Krempels, Valérie Monfort

This book contains the proceedings of the 13th International Conference on Web Information Systems and Technologies (WEBIST 2017), which was organized and sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC). The conference was held in...

Proceedings of the 13th International Conference on Web Information Systems and Technologies, 1, , 2017, 978-989758246-2. ⟨hal-03666598⟩

• Communication dans un congrès

Multi-Physic Analysis of Electrical Machines: Hybrid Electro-Magneto-Aero-ThermalModeling

Oualid Messal, Louis Lambourg, Frédéric Dubas, Souad Harmand, Afef Kedous-Lebouc, Christian Chillet

ICEMS 2017 : 19th International Conference on Electrical Machines and Systems, 2017, San Francisco, United States. ⟨hal-02330493⟩

• Communication dans un congrès

Thermomechanical modeling of glass cooling including thermal radiation using P1 method

Kossiga Agboka, Fabien Béchet, Philippe Moreau, Dominique Lochegnies

Glass tempering consists in heating a glass product over its transition temperature followed by a rapid cooling to the ambient temperature. This process is used to improve the mechanical resistance of the glass product with compressive stresses on the surface and tensile stresses in the core. The...

CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France. ⟨hal-03465240⟩

• Article dans une revue

A review of characterisation and parameters identification of materials constitutive and damage models: From normalised direct approach to most advanced inverse problem resolution

Eric Markiewicz, Bertrand Langrand, Delphine Notta-Cuvier

The paper aims at providing an overview of the research activities performed in the two past decades in the field of materials characterisation under dynamic loadings (i.e. from to for structural crashworthiness and impact applications) and identification of parameters of constitutive behaviour and...

International Journal of Impact Engineering, 2017, 110, pp. 371-381. ⟨10.1016/j.ijimpeng.2017.01.028⟩. ⟨hal-01659636⟩

• Article dans une revue

Experimental assessment of the sudden-reversal of the oxygen dilution effect on soot production in coflow ethylene flames

Qianlong Wang, Guillaume Legros, Jérôme Bonnety, Céline Morin, Alexis Matynia, Jean-Louis Consalvi, Fengshan Liu

This paper explores the influence of oxygen dilution on soot production when oxygen is added to the fuel stream of a steady laminar ethylene flame established over the Santoro axisymmetric coflow burner. Interestingly, at an oxygen mole fraction X_{ax}^{O_2,trans} located between 30% and 32%, a...

Combustion and Flame, 2017, 183, pp.242-252. ⟨10.1016/j.combustflame.2017.05.001⟩. ⟨hal-01557989⟩

• Rapport

The Patches of the Nopol Automatic Repair System on the Bugs of Defects4J version 1.1.0

Thomas Durieux, Benjamin Danglot, Zhongxing Yu, Matias Martinez, Simon Urli, Martin Monperrus

This report lists the test-suite adequate patches found by the Nopol automatic repair system on version 1.1.0 of the Defects4J benchmark of bugs.

[Research Report] hal-01480084, Université Lille 1 - Sciences et Technologies. 2017. ⟨hal-01480084⟩

• Article dans une revue

ELECTRE I Based Relevance Decision-Makers Feedback to the Location Selection of Distribution Centers

Maroi Agrebi, Mourad Abed, Moahamed Nazih Omri

The location selection of distribution centers is one of the important strategies to optimize the logistics system. To solve this problem, under certain environment, this paper presents a new multicriteria decision-making method based on ELECTRE I. The proposed method helps decision-makers to...

Journal of Advanced Transportation, 2017, 51, pp.1-10. ⟨10.1155/2017/7131094⟩. ⟨hal-03401659⟩

• Article dans une revue

Performance and environmental factors related to the main locomotor outcome in persons with an unilateral transtibial amputation equipped with energy storage and return feet, L'association entre les facteurs performance et environnement et le niveau de locomotion chez les personnes atteintes d'une amputation transtibiale unilatérale équipées d'un pied prothétique à stockage et restitution d'énergie

Yoshimasa Sagawa Jr, Ali Moustapha, Florence Beaucamp, André Thevenon, Eric Watelain

Objective. To assess performance and environmental factors in persons with an Unilateral TransTibial amputation (UTTA) equipped with an Energy Storage And Return (ESAR) foot. Method. Prosthetic Profile of the Amputees (PPA) questionnaire was sent to 295 adults with an UTTA. Results. Seventy-eight..., Objectif. Évaluer les facteurs performance et environnement chez les Personnes atteintes d'une Amputation Transtibial Unilatérale (PATU) équipées d'un Pied prothétique à Stockage/Restitution d'Énergie (PSRE). Méthode. Le questionnaire Profil Prothétique de l'Amputé (PPA) a été...

Movement & Sport Sciences - Science & Motricité, 2017, 98, pp.67-75. ⟨10.1051/sm/2017023⟩. ⟨hal-03028107⟩

• Article dans une revue

Macro-modeling of spot weld strength and failure: Formulation and identification procedure based on pure and mixed modes of loading, Modélisation à l'échelle macroscopique de la tenue et de la rupture des points soudés : formulation et procédure d'identification fondée sur des changements en mode purs et mixtes

Rim Chtourou, Nicolas Leconte, Bassem Zouari, Fahmi Chaari, Eric Markiewicz, Bertrand Langrand

Purpose This paper aims to propose a macro modeling approach to simulate the mechanical behavior and the failure of spot welded joints in structural crashworthiness computations. Design/methodology/approach A connector element is proposed to simulate the behavior and failure of spot weld joints. An...

Engineering Computations, 2017, 34 (3), pp.941-959. ⟨10.1108/EC-03-2016-0081⟩. ⟨hal-01580320⟩