Publicaciones

• Article dans une revue

Turbulent Flows Structures Crossing Conical Diffusers: Angle Effect Analysis using PIV Technique and POD for Post-Processing

Emna Berrich, Fethi Aloui, D Pierrat, L Gros, Anthony Couzinet, Jack Legrand

In this work, we investigated experimentally the hydrodynamics of flows crossing conical diffusers. On our previous work (Aloui et al., 2011), CFD turbulent models were validated for flows crossing the critical angle (2α=16°). Indeed, the PIV data base constructed was exploited to validate a...

Journal of Applied Fluid Mechanics, 2016, 9 (Special Issue 1), pp.19-29. ⟨10.36884/JAFM.9.SI1.25827⟩. ⟨hal-01349723⟩

• Communication dans un congrès

HCI Engineering Integrated with Capability Maturity Models

Taisa Guidini Gonçalves, Káthia Marçal de Oliveira, Christophe Kolski

Even though coming from different communities, Software Engineering (SE) and Human-Computer Interaction (HCI) engineering have similar goals: the definition of methods, techniques and standards to support the development of software systems, and, in particular for HCI, of interactive systems....

10th International Conference on Research Challenges in Information Science, IEEE RCIS 2016, Institute of Electrical and Electronics Engineers (IEEE), May 2016, Grenoble, France. pp.633-644, ⟨10.1109/RCIS.2016.7549319⟩. ⟨hal-03350385⟩

• Communication dans un congrès

Maintenance decision support for sustainable performance: problems and research directions at the crossroads of health management and eco-design

Olivier Sénéchal

Despite companies progressively taking sustainable performance into account through various governmental incentives and policies, most still have their own strategic, tactical or operational targets based essentially on economic criteria (turnover, productivity, inventory valuation...). Since the...

3rd IFAC Workshop on Advanced Maintenance Engineering, Services and Technology AMEST 2016, Oct 2016, Biarritz, France. pp.85-90, ⟨10.1016/j.ifacol.2016.11.015⟩. ⟨hal-03416145⟩

• Chapitre d'ouvrage

Arezzo: an emulator for the bench4star initiative

Thierry Berger, Dominique Deneux, Thérèse Bonte, Etienne Cocquebert, Damien Trentesaux

Fischer X., Daidie A., Eynard B., Paredes M. Research in Interactive Design, 4, Springer, pp. 530-536, 2016, 978-3-319-26119-5. ⟨hal-03406808⟩

• Article dans une revue

Scavenging Process Analysis in a 2-Stroke Engine by CFD Approach for a Parametric 0D Model Development

Stéphanie Cagin, Nachida Bourabaa, Eric Delacourt, Céline Morin, Xavier Fischer, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents a method to improve cylinder design of 2-stroke auto-ignition engine based on a CFD (Computational Fluid Dynamics) study of internal flows in the chamber and an unsteady global 0D parametric approach. In 2-stroke engine, scavenging process plays an important role regarding...

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.69-80. ⟨10.36884/jafm.9.SI1.26397⟩. ⟨hal-01330948⟩

• Article dans une revue

Turbulent Plane Impinging Jet-Physical Insight and Turbulence Modeling

Mahmoud Charmiyan, Ahmed-Reza Azimian, Laurent Keirsbulck, Ebrahim Shirani, Fethi Aloui

A 3D numerical simulation using large eddy simulation (LES) method is performed for a submerged turbulent water slot jet impinging normally on a flat plate with a nozzle-to-plate distance of 10 jet width and a Reynolds number of 16000 and the results are compared with the existing experimental data...

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.11-17. ⟨10.36884/jafm.9.SI1.25825⟩. ⟨hal-03448221⟩

• Chapitre d'ouvrage

Measurements of dynamic properties of ballistic yarns using innovative testing devices

Caroline Chevalier, Christophe Kerisit, Andreas Klavzar, François Boussu, Daniel Coutellier

This chapter highlights the influence of the dynamic characteristic of yarn on the ballistic performance of fabric submitted to impact. A brief review of existing research works done on the dynamic tensile test known as the Hopkinson bar, and more recently the Split Flying Bar, is presented. A new...

Advanced Fibrous Composite Materials for Ballistic Protection, Elsevier, pp.199-215, 2016, 978-178242461-1. ⟨10.1016/B978-1-78242-461-1.00007-8⟩. ⟨hal-03667392⟩

• Article dans une revue

Modelling Laminate Failure in Composite Materials for Automotive Applications

David Moncayo, F. Köster, Pedro P Camanho, Daniel Coutellier, S. Hartmann

In order to capture the complexity of material failure it is necessary to understand that the performance of FE models depends on a fair use and a fair modeling of composite materials. Based on previous research works, the prognosis capabilities of the current material definitions in LS-DYNA will...

FEA Information Engineering Journal, 2016, 5 (6), pp.1-24. ⟨hal-03445539⟩

• Communication dans un congrès

Distributed tabletops: Study involving two RFID tabletops with generic tangible objects

Amira Bouabid, Sophie Lepreux, Christophe Kolski

This paper describes a study on an innovative system designed to support remote collaborative. This system is a game running on tabletops with tangible interaction. Twelve test groups, each composed of three participants, tested a distributed application for learning and recognition of colors. We...

Current Trends in Web Engineering ICWE 2016 International Workshops, Jun 2016, Lugano, Switzerland. pp.167-173, ⟨10.1007/978-3-319-46963-8_15⟩. ⟨hal-03350337⟩

• Communication dans un congrès

Layers of Shared and Cooperative Control, assistance and automation

Marie-Pierre Pacaux-Lemoine, Frank Flemisch

Over the last centuries we have experienced scientific, technological and societal progress that enabled the creation of intelligent assisted and automated machines with increasing abilities, and require a conscious distribution of roles and control between humans and machines. Machines can be more...

13th IFAC Symposium on Analysis, Design, and Evaluation ofHuman-Machine Systems HMS 2016, Aug 2016, Kyoto, Japan. pp.159-164, ⟨10.1016/j.ifacol.2016.10.479⟩. ⟨hal-03417223⟩