Publicaciones

• Communication dans un congrès

Thermomechanical modeling of glass cooling including thermal radiation using P1 method

Kossiga Agboka, Fabien Béchet, Philippe Moreau, Dominique Lochegnies

Glass tempering consists in heating a glass product over its transition temperature followed by a rapid cooling to the ambient temperature. This process is used to improve the mechanical resistance of the glass product with compressive stresses on the surface and tensile stresses in the core. The...

CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France. ⟨hal-03465240⟩

• Communication dans un congrès

Outcomes of MADMAX the European network on composites for transport applications

Camille Durand, Daniel Coutellier, Carole Magniez, Moise Vouters

Within the European Union, road transport is responsible for about 20% of all CO2 emissions. To reduce these gas emissions, the European Union is introducing stringent standards defining the acceptable limits for exhaust emission of new vehicles sold in EU member states. Thus, transport industries...

CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France. ⟨hal-03465561⟩

• Article dans une revue

ELECTRE I Based Relevance Decision-Makers Feedback to the Location Selection of Distribution Centers

Maroi Agrebi, Mourad Abed, Moahamed Nazih Omri

The location selection of distribution centers is one of the important strategies to optimize the logistics system. To solve this problem, under certain environment, this paper presents a new multicriteria decision-making method based on ELECTRE I. The proposed method helps decision-makers to...

Journal of Advanced Transportation, 2017, 51, pp.1-10. ⟨10.1155/2017/7131094⟩. ⟨hal-03401659⟩

• Communication dans un congrès

Train timetable rearrangement facing infrastructure maintenance activities

Luis Diego Arenas Pimentel, Paola Pellegrini, Said Hanafi, Joaquin Rodriguez

Maintenance activities are necessary to maintain the functionality of the railway infrastructure. Commonly, the maintenance activities are planned first. Then, the timetable is elaborated respecting the unavailability periods caused by the former. However, unplanned maintenance activities may have...

ROADEF 2017, 18ème conférence de la Société française de Recherche Opérationnelle et d'Aide à la Décision, Feb 2017, Metz, France. 2p. ⟨hal-01469801v2⟩

• Article dans une revue

A review of characterisation and parameters identification of materials constitutive and damage models: From normalised direct approach to most advanced inverse problem resolution

Eric Markiewicz, Bertrand Langrand, Delphine Notta-Cuvier

The paper aims at providing an overview of the research activities performed in the two past decades in the field of materials characterisation under dynamic loadings (i.e. from to for structural crashworthiness and impact applications) and identification of parameters of constitutive behaviour and...

International Journal of Impact Engineering, 2017, 110, pp. 371-381. ⟨10.1016/j.ijimpeng.2017.01.028⟩. ⟨hal-01659636⟩

• Article dans une revue

Macro-modeling of spot weld strength and failure: Formulation and identification procedure based on pure and mixed modes of loading, Modélisation à l'échelle macroscopique de la tenue et de la rupture des points soudés : formulation et procédure d'identification fondée sur des changements en mode purs et mixtes

Rim Chtourou, Nicolas Leconte, Bassem Zouari, Fahmi Chaari, Eric Markiewicz, Bertrand Langrand

Purpose This paper aims to propose a macro modeling approach to simulate the mechanical behavior and the failure of spot welded joints in structural crashworthiness computations. Design/methodology/approach A connector element is proposed to simulate the behavior and failure of spot weld joints. An...

Engineering Computations, 2017, 34 (3), pp.941-959. ⟨10.1108/EC-03-2016-0081⟩. ⟨hal-01580320⟩

• Article dans une revue

Adaptive Medical Image Compression Based on Lossy and Lossless Embedded Zerotree Methods

Sid Ahmed Elhannachi, Nacéra Benamrane, Abdelmalik Taleb-Ahmed

Since the progress of digital medical imaging techniques, it has been needed to compress the variety of medical images. In medical imaging, reversible compression of image's region of interest (ROI) which is diagnostically relevant is considered essential. Then, improving the global...

Journal of Information Processing Systems, 2017, 13 (1), pp.40-56. ⟨10.3745/JIPS.02.0052⟩. ⟨hal-03429425⟩

• Communication dans un congrès

Multi-Physic Analysis of Electrical Machines: Hybrid Electro-Magneto-Aero-ThermalModeling

Oualid Messal, Louis Lambourg, Frédéric Dubas, Souad Harmand, Afef Kedous-Lebouc, Christian Chillet

ICEMS 2017 : 19th International Conference on Electrical Machines and Systems, 2017, San Francisco, United States. ⟨hal-02330493⟩

• Article dans une revue

A Graphical Model Based on Performance Shaping Factors for Assessing Human Reliability

Subeer Rangra, Mohamed Sallak, Walter Schön, Frédéric Vanderhaegen

Human reliability assessment (HRA) is an aspect of risk analysis concerned with identifying, analyzing, and quantifying the causes, contributions, and occurrence of human failures. Applications of existing HRA methods are often domain-specific, and difficult to implement even for experts. Also, due...

IEEE Transactions on Reliability, 2017, 66 (4), pp.1120-1143. ⟨10.1109/TR.2017.2755543⟩. ⟨hal-01668143⟩

• Article dans une revue

Reducing the Toxicity Risk in Antibiotic Prescriptions by Combining Ontologies with a Multiple Criteria Decision Model

Souhir Ben Souissi, Mourad Abed, Lahcen Elhiki, Philippe Fortemps, Marc Pirlot

We consider the risk of adverse drug events caused by antibiotic prescriptions. Antibiotics are the second most common cause of drug related adverse events and one of the most common classes of drugs associated with medical malpractice claims. To cope with this serious issue, physicians rely on...

AMIA .. Annual Symposium proceedings [electronic resource] / AMIA Symposium. AMIA Symposium., 2017, pp.1625-1634. ⟨hal-03666537⟩