Publicaciones

• Article dans une revue

Exergy assessment of heat transfer inside a Beta type Stirling engine

Houda Hachem, Ramla Gheith, Fethi Aloui, Sassi Ben Nasrallah, Ibrahim Dincer

This paper presents an assessment of both energy and exergy efficiencies of a Beta Stirling engine prototype with a 30 W capacity as the maximum mechanical power output. Its operating pressure is close to atmospheric pressure, and it supports a maximum hot end temperature of 650 degrees C. The...

International Journal of Exergy, 2016, 20 (2), pp.186-202. ⟨10.1504/IJEX.2016.076863⟩. ⟨hal-03447147⟩

• Article dans une revue

Finding a stabilizing switching law for switching TS models

Zsofia Lendek, Paula Raica, Jimmy Lauber, Thierry-Marie Guerra

This paper considers the stabilisation of switching nonlinear models by switching between the subsystems. We assume that arbitrary switching between two subsystems is possible once a subsystem has been active for a predefined number of samples. We use a Takagi–Sugeno representation of the models...

International Journal of Systems Science, 2016, 47 (12), pp.2762-2772. ⟨10.1080/00207721.2015.1021290⟩. ⟨hal-03430042⟩

• Communication dans un congrès

Advanced model based air path management using a discrete-angular controller in idle-speed context

Thomas Laurain, Jimmy Lauber, Reinaldo Martinez Palhares

This paper aims to present an original methodology to design a controller for the air path management considered as a nonlinear system that is presented as a periodic discrete Takagi-Sugeno (TS) model. A transformation is realized to translate the periodic behavior into a classic discrete model...

IFAC AAC, Jun 2016, Norkköping, Sweden. pp.611-618, ⟨10.1016/j.ifacol.2016.08.089⟩. ⟨hal-03407068⟩

• Communication dans un congrès

An Iterative Greedy Insertion Technique for Flexible Job Shop Scheduling Problem

Azzedine Bekkar, Oualid Guemri, Abdelghani Bekrar, Nassima Aissani, Bouziane Beldjilali, Damien Trentesaux

This paper studies the problem of scheduling in a flexible job shop. A greedy heuristic is developed to solve precisely the sequencing (allocation) problem. The principle of this approach is to iteratively insert operations on the machines until the objective of minimizing the Cmax (makespan) is...

8th IFAC Conference on Manufacturing Modelling, Management and Control MIM 2016, Dec 2016, Troyes, France. pp.1956-1961, ⟨10.1016/j.ifacol.2016.07.917⟩. ⟨hal-03406967⟩

• Ouvrages

Special issue: Information Systems in Transport Logistics, International Journal of Shipping and Transport Logistics

Mounir Benaissa, Mourad Abed

Inderscience Publishers, 2016, 1756-6517. ⟨hal-03388662⟩

• Article dans une revue

EQUITAS: A tool-chain for functional safety and reliability improvement in automotive systems

Reda Nouacer, Manel Djemal, Smail Niar, Gilles Mouchard, Nicolas Rapin, Jean-Pierre Gallois, Philippe Fiani, François Chastrette, Arnault Lapitre, Toni Adriano, Bryan Mac-Eachen

To support advanced features such as hybrid engine control, intelligent energy management, and advanced driver assistance systems, automotive embedded systems must use advanced technologies. As a result, systems are becoming distributed and include dozens of Electronic Control Units (ECU). On the...

Microprocessors and Microsystems: Embedded Hardware Design , 2016, 47, pp.252-261. ⟨10.1016/j.micpro.2016.07.020⟩. ⟨cea-01845196⟩

• Article dans une revue

Multiscale roughness analysis of engineering surfaces: A comparison of methods for the investigation of functional correlations

Gaëtan Le Goïc, Maxence Bigerelle, Serge Samper, Hugues Favrelière, Maurice Pillet

This study investigates the correlations between the topography of different damaged rough surfaces and process conditions. Several surfaces are measured and compared to determine if they can be discriminated. The analysis is performed by using Gaussian Filtering, Wavelet Transform and a more...

Mechanical Systems and Signal Processing, 2016, 66-67, pp.437-457. ⟨10.1016/j.ymssp.2015.05.029⟩. ⟨hal-01202891⟩

• Proceedings/Recueil des communications

Service Orientation in Holonic and Multi-agent Manufacturing

Theodor Borangiu, Damien Trentesaux, André Thomas, Duncan Mcfarlane

Of interest are recent advances and on-going research in holonic and agent-based systems for manufacturing. Industrials are seeking for models and solutions that are not only able to provide efficient overall production performance, but also to face reactively a growing set of unpredicted events....

2016, Service Orientation in Holonic and Multi-agent Manufacturing, 978-3-319-30335-2. ⟨10.1007/978-3-319-30337-6⟩. ⟨hal-01425754⟩

• Communication dans un congrès

The ConWip Production Control System: a Literature Review

Yann Jaegler, Patrick Burlat, Samir Lamouri

A growing body of literature dealing with ConWip has been observed during the past decade. Considering the current industrial challenges characterized by adaptability, product customization, shortened lead times and customer satisfaction, ConWip appears to be an effective and adapted production...

The International Conference on Information Systems, Logistics and Supply Chain (ILS International Conference) , KEDGE Business School in Bordeaux, Jun 2016, Bordeaux France. ⟨hal-01350666⟩

• Communication dans un congrès

Towards a context based Evaluation Support System for Quality in Use assessment of mobile systems

Emna Ben Ayed, Rim Magdich, Christophe Kolski, Houcine Ezzedine

Mobile applications, which introduce a new style of interaction between the final user and the mobile systems, are used in different contexts of use. So, a context based evaluation of the Quality in Use (QinU) of such systems becomes required. In this work, we present a method towards supporting...

IEEE International Conference on Systems, Man and Cybernetics (SMC 2016), Institute of Electrical and Electronics Engineers (IEEE), Oct 2016, Budapest, Hungary. pp.4350-4355, ⟨10.1109/SMC.2016.7844915⟩. ⟨hal-03350098⟩