Publicaciones

• Communication dans un congrès

Thermal effect of the welding process on the dynamic behavior of the HSS constitutive materials of a fillet welded joint

Julien Carrier, Eric Markiewicz, Grégory Haugou, David Lebaillif, Nicolas Leconte, Hakim Naceur

Welded joints, due to their manufacturing process, are commonly weakened areas. This study analyses the dynamic behavior of the Base Metal (BM) and the Heat-Affected Zone (HAZ) of an HSS (High Strength Steel) fillet welded joint. Firstly, a specific approach has been developed to generate the HAZ...

CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France. ⟨hal-03446151⟩

• Ouvrages

Cyberdéfense La sécurité de l'informatique industrielle (domotique, industrie, transports)

Joffrey Clarhaut, Nicolas Dupoty, Franck Ebel, Jérôme Hennecart, Frédéric Vicogne

Ce livre sur la cyberdéfense s'adresse à toute personne sensibilisée au concept de la sécurité dans le domaine industriel. Il a pour objectif d'initier le lecteur aux techniques les plus courantes des attaquants pour lui apprendre comment se défendre. En effet, si la sécurité de l'...

E. N. I. Editions, 2015, 978-2-7460-9917-3. ⟨hal-03420348⟩

• Article dans une revue

Bilateral Strength Deficit Is Not Neural in Origin; Rather Due to Dynamometer Mechanical Configuration

Emilie Simoneau-Buessinger, Sebastien Leteneur, Anis Toumi, Alexandra Dessurne, François Gabrielli, Franck Barbier, Jennifer Jakobi

During maximal contractions, the sum of forces exerted by homonymous muscles unilaterally is typically higher than the sum of forces exerted by the same muscles bilaterally. However, the underlying mechanism(s) of this phenomenon, which is known as the bilateral strength deficit, remain equivocal....

PLoS ONE, 2015, 10 (12), pp.e0145077. ⟨10.1371/journal.pone.0145077⟩. ⟨hal-03464838⟩

• Article dans une revue

Specialized Reduced Models of Dynamic Flows in 2-Stroke Engines

Stéphanie Cagin, Xavier Fischer, Eric Delacourt, Nachida Bourabaa, Céline Morin, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

The complexity of scavenging by ports and its impact on engine efficiency create the need to understand and to model it as realistically as possible. However, there are few empirical scavenging models and these are highly specialized. In a design optimization process, they appear very restricted...

International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 2015, 9 (9), pp.1684 - 1693. ⟨10.5281/zenodo.1124187⟩. ⟨hal-01330965⟩

• Article dans une revue

Experimental study of oil cooling systems for electric motors

Tanguy Davin, Julien Pellé, Souad Harmand, Robert Yu

The present study focuses on the use of lubricating oil as a coolant for electrical motors. Oil is introduced at each side of a 40 kW test machine to directly cool the stator coil end-windings. An experimental setup has been implemented to test different oil injection patterns. The influence of the...

Applied Thermal Engineering, 2015, 75, pp.1-13. ⟨10.1016/j.applthermaleng.2014.10.060⟩. ⟨hal-03452082⟩

• Rapport

Comparaison de chaussures de running lors de la course chez l’enfant

Christophe Gillet, Franck Barbier

[Rapport de recherche] Rapport de contrat dans le cadre d'une convention de recherche passée avec la société OXYLANE, LAMIH, Valenciennes. 2015. ⟨hal-03463881⟩

• Article dans une revue

Supporting software process performance analysis through a knowledge-based environment

Natalia Chaves Lessa Schots, Taisa Guidini Gonçalves, Rodrigo Figueiredo Magalhaes, Ricardo de Holanda Busquet, Ana Regina Rocha, Gleison Santos, Káthia Marçal de Oliveira

Software process performance analysis is a challenge for software organizations that aim to achieve higher levels of maturity models and quality standards, as it usually depends on knowledge of quantitative and statistical techniques, and experience with software processes and in the organizational...

CLEI Electronic Journal., 2015, pp.1-12. ⟨10.1109/CLEI.2014.6965146⟩. ⟨hal-03401144⟩

• Communication dans un congrès

Separation of the elastic waves’ system in pre-stretched bar devices

Grégory Haugou, Nicolas Leconte, Hervé Morvan

The loading mode generated by Kolsky bars apparatus is limited due to physical reasons to a duration time of around 0.4ms. This is not suited in the characterization of high ductility metallic alloys up to fracture at moderate strain rates, since the duration time is too short. The pre-stretched...

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.01067, ⟨10.1051/epjconf/20159401067⟩. ⟨hal-03433273⟩

• Chapitre d'ouvrage

Friction Analysis in Bulk Metal Forming

Laurent Dubar, André Dubois, Mirentxu Dubar

A methodology to characterize friction according to the severe conditions of contact encountered in metal forming is presented. The main peculiarity of the proposed method is to use specimens and contactor made of industrial tool and workpiece surface in laboratory bench tests in order to ensure...

A. Erman Tekkaya; Alexander Brosius; Werner Homberg. 60 Excellent Inventions in Metal Forming, Springer Berlin Heidelberg, pp.23-28, 2015, 978-3-662-46312-3. ⟨10.1007/978-3-662-46312-3_4⟩. ⟨hal-03579559⟩

• Communication dans un congrès

Harmonized methodology for Safety Integrity Level allocation in a generic TCMS application

Kiswendsida Abel Ouedraogo, Julie Beugin, El Miloudi El Koursi, Joffrey Clarhaut, Dominique Renaux, Frédéric Lisiecki

This article presents a generic methodology for SIL allocation to railway rolling stock safety-related func-tions to solve the SIL concept application issues. This methodology is based on the flowchart formalism al-ready used in CSM European regulation. It starts with the use of quantitative safety...

ESREL 2015 - European safety and reliability conference, Sep 2015, Zürich, Switzerland. pp.3579-3587. ⟨hal-01471416⟩