Publicaciones

• Chapitre d'ouvrage

Integrating Human and Organizational Factors into the BCD Risk Analysis Model: An Influence Diagram-based approach

Karima Sedki, Philippe Polet, Frédéric Vanderhaegen

Supervision and Safety of Complex Systems, John Wiley & Sons, Inc., pp.293-316, 2013, 978-184821413-2. ⟨10.1002/9781118561744.ch15⟩. ⟨hal-03624774⟩

• Article dans une revue

Review of fluid flow and convective heat transfer within rotating disk cavities with impinging jet

Souad Harmand, Julien Pellé, Sébastien Poncet, Igor Shevchuk

Fluid flow and convective heat transfer in rotor-stator configurations, which are of great importance in different engineering applications, are treated in details in this review. The review focuses on convective heat transfer in predominantly outward air flow in the rotor-stator geometries with...

International Journal of Thermal Sciences, 2013, 67, pp.1-30. ⟨10.1016/j.ijthermalsci.2012.11.009⟩. ⟨hal-00975626⟩

• Thèse

Etude et réalisation d’une solution composite à renfort tissé interlock pour la protection balistique de véhicule, Study and evaluation of a solution based on warp interlock reinforced composite for vehicle ballistic protection

Benjamin Provost

Cette thèse a été réalisée au sein des laboratoires du GEMTEX et du LAMIH, et porte sur l’étude et l’évaluation d’une solution composite à renfort tissé pour la protection balistique de véhicule. L’enjeu de cette thèse consiste à explorer le potentiel des solutions en composite à renfort tissé..., This thesis was performed at the laboratories of GEMTEX and LAMIH on study and evaluation of a solution based on warp interlock reinforced composite for vehicle ballistic protection. The main purpose of this thesis is to explore the potential of warp interlock reinforced composite solutions in the...

Mécanique des matériaux [physics.class-ph]. Université de Valenciennes et du Hainaut-Cambrésis, 2013. Français. ⟨NNT : 2013VALE0003⟩. ⟨tel-03356099⟩

• Article dans une revue

Sensibility of Bayesian inference methods for reliability prediction of ageing systems, case of Diesel locomotives

Rachid Ziani, Mohamed-Salah Ouali, Abdelhakim Artiba

This paper addresses the problem of reliability analysis of in-service identical systems when a limited number of lifetime data is available compared to censored ones. Lifetime (resp. censored) data characterise the life of failed (resp. non-failed) systems in the sample. Because, censored data...

International Journal of Production Research, 2013, 52 (14), pp.4142-4155. ⟨10.1080/00207543.2013.857052⟩. ⟨hal-03578415⟩

• Article dans une revue

A new automatic image registration algorithm based on corner detector for remote sensing applications

Lila Meddeber, Tarik Zouagui, Abdelmalik Taleb-Ahmed, Nassreddine Berrached

In this paper, we propose a new automatic satellite image registration approach capable of handling remotely sensed images geometrically distorted by various transformations such as translation, rotation, and shear. This technique exploits the invariant relations between regions of a reference...

International Review on Computers and Software (IRECOS), 2013, 8 (1), pp.347-352. ⟨hal-03508271⟩

• Communication dans un congrès

Optimal Design of a High Performance Haptic Device

Quoc Viet Dang, Antoine Dequidt, Laurent Vermeiren, Michel Dambrine

Stability and transparency are very important performance measures in the design of haptic devices. This paper addresses the design of haptic device in the case of interaction to a virtual wall. A novel optimal design method for high performance (stability and low inertia) haptic devices is...

EEE International Conference on Mechatronics, Feb 2013, Vicence, Italy. ⟨hal-03467293⟩

• Article dans une revue

3D Modelling of Thermal Replication for Designing Progressive Glass Moulds

Dominique Lochegnies, Philippe Moreau, Fabienne Hanriot, Patrick Hugonneaux

Worldwide, ESSILOR International provides customers with Progressive Addition Lenses (PAL), which replace bifocal lenses. Thermal replication is one process to produce glass moulds for PAL, using sagged glass on a ceramic slumping block. In this paper, thermal replication for producing PAL glass...

New Journal of Glass and Ceramics, 2013, 3 (1), pp.34-42. ⟨10.4236/njgc.2013.31006⟩. ⟨hal-03523040⟩

• Communication dans un congrès

Towards large time simulation reduction for the solving of mechanical contact (large scale) problems: A robust control approach

Antonio Gonzalez Sorribes, Jimmy Lauber, Thierry-Marie Guerra, Franck Massa, Thierry Tison

The evolution of computational resources contributes to the use, more and more frequent, of mechanical contact in numerical models. The main difficulty is to determine rapidly the contact loads which allow balancing two structures, modeled by the finite element method. This problem is reported to...

3rd IFAC Conference on Intelligent Control and Automation Science, ICONS 2013, Sep 2013, Chengdu, China. pp.417-422, ⟨10.3182/20130902-3-CN-3020.00183⟩. ⟨hal-03615281⟩

• Chapitre d'ouvrage

FEM Simulation Based on CAD Model Simplification: A Comparison Study between the Hybrid Method and the Technique Using a Removing Details

Mounir Hamdi, Nizar Aifaoui, Borhen Louhichi, Abdelmajid Benamara, Dominique Deneux

The simulation process is currently used in the design and dimensioning of mechanical parts. With the progress of computer materials, the Finite Elements Method (FEM) becomes the most used approach in the simulation of mechanical behavior. The simulation process needs multiple Design-FEM loops. In...

Design and Modeling of Mechanical Systems, Springer Berlin Heidelberg, pp.587-596, 2013, Lecture Notes in Mechanical Engineering, ⟨10.1007/978-3-642-37143-1_70⟩. ⟨hal-03621588⟩

• Article dans une revue

CISIT le Campus Interdisciplinaire sur les Transports et la Mobilité Durable : focus sur les nouveaux défis pour des véhicules plus légers, fiables et sécuritaires, CISIT the Interdisciplinary Cluster on Sustainable Transports and Mobility: Focus on new challenges for clean, safe and lightweight vehicles

Eric Markiewicz

Cette contribution présente CISIT, le cluster de la mobilité durable des personnes et des biens. Cette initiative réussie a été mise en place en 2007 dans le cadre des contrats de projets État-Région et du programme opérationnel FEDER (CPER-PO 2007-2013) pour la région Nord-Pas-de-Calais. CISIT..., This contribution presents CISIT, the cluster for sustainable mobility of people and goods. This successful initiative was set up in 2007 within the framework of the State-Region projects of contract and the FEDER Operational Program (CPERPO 2007-2013) for the French Nord-Pas de Calais region....

MATEC Web of Conferences, 2013, 7, pp.00003. ⟨10.1051/matecconf/20130700003⟩. ⟨hal-03623305⟩