Publicaciones

• Article dans une revue

A three-dimensional study of electronic component cooling using a flat heat pipe

Hamdy Hassan, Souad Harmand

In this article, a three-dimensional thermal and hydrodynamic numerical model using a flat heat pipe (vapor chamber) is proposed for cooling of electronic components. The heat pipe is composed of a vapor region sandwiched between two wick regions, which are covered by two flat copper plates. A...

Heat Transfer Engineering, 2013, 34 (7), pp.596-607. ⟨10.1080/01457632.2013.730426⟩. ⟨hal-03531174⟩

• Article dans une revue

Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle

Marie Creyx, Eric Delacourt, Céline Morin, Bernard Desmet, Philippe Peultier

The micro combined heat and electrical power systems (micro-CHP) with hot air engines are well adapted for solid biomass upgrading, in particular, the Ericsson engines working with an open cycle and an external combustion. This paper presents a model of an Ericsson engine with a compression and an...

Energy, 2013, 49 (1), pp. 229-239. ⟨10.1016/j.energy.2012.10.061⟩. ⟨hal-03531364⟩

• Article dans une revue

Liquid hydrocarbon fuels from fish oil industrial residues by catalytic cracking

Nadia Mrad, Maria Paraschiv, Fethi Aloui, Edwin Geo Varuvel, Mohand Tazerout, Sassi Ben Nasrallah

In the present work, catalytic cracking of fish oil industrial residue was investigated to study the effect of temperature, type of catalyst and the heating rate on the yield of organic liquid fraction (OLF) and its acid value. The highest bio-oil yield of 72% (wt.) was obtained at temperature...

International Journal of Energy Research, 2013, 37 (9), pp.1036-1043. ⟨10.1002/er.2906⟩. ⟨hal-00935904⟩

• Communication dans un congrès

Des Honeypots Mobiles Pour La Sécurité Proactive des Réseaux Ad Hoc Véhiculaires (VANETs)

Dhavy Gantsou, Patrick Sondi Obwang

Colloque international TELECOM’2013 & 8ème JFMMA, 2013, Marrakech, Maroc. ⟨hal-03577439⟩

• Article dans une revue

Unified Driver Model simulation and its application to the automotive, rail and maritime domains

Pietro Carlo Cacciabue, Simon Enjalbert, Håkan Söderberg, Andreas Tapani

This paper describes the implementation of a model of a driver into a computerised numerical simulation. The model is developed to capture the essential characteristics and common aspects of cognition and behaviour of a human being in control of a “vehicle” in different surface transport systems,...

Transportation Research Part F: Traffic Psychology and Behaviour, 2013, 21, pp.315-327. ⟨10.1016/j.trf.2013.09.020⟩. ⟨hal-03509701⟩

• Article dans une revue

Plastic deformation of structural steels under hot-working conditions

Eli Saúl Puchi-Cabrera, Jean-Dominique Guerin, Damien Barbier, Mirentxu Dubar, Jacky Lesage

The present study has been conducted in order to formulate a rational description of the flow stress of structural steels, when these are deformed in tension under hot-working conditions. The simplified formulation that has been developed only involves the analysis of the positive work-hardening...

Materials Science and Engineering: A, 2013, 559, pp.268-275. ⟨10.1016/j.msea.2012.08.097⟩. ⟨hal-00742740⟩

• Ouvrages

Ergonomie des Systèmes Homme-machine

Patrick Millot

Patrick Millot. Hermès science publications. Lavoisier, 386 pp., 2013, 978-2-7462-3920-3. ⟨hal-03467984⟩

• Article dans une revue

Assessment of ship maneuverability by using a coupling between a nonlinear transient ship maneuvering model and mathematical programming techniques

T. Tran Khanh, Abdellatif Ouahsine, Hakim Naceur, Karima El Wassifi

In this paper, a numerical method based on a coupling between a mathematical model of nonlinear transient ship manoeuvring motion in the horizontal plane and Mathematical Programming (MP) techniques is proposed. The aim of the proposed procedure is an efficient estimation of optimal ship...

Journal of Hydrodynamics, 2013, 25 (5), pp.788-804. ⟨10.1016/S1001-6058(13)60426-6⟩. ⟨hal-03629803⟩

• Communication dans un congrès

Application of a Co-evolutionary Genetic Algorithm to solve the Periodic Railway Timetabling Problem

Luis Diego Arenas Pimentel, Rémy Chevrier, Clarisse Dhaenens, Said Hanafi, Joaquin Rodriguez

In train operations, a timetable is used to establish the departure and arrival times for the trains at the stations or other relevant locations in the rail network or a subset of this network. The elaboration of a timetable responds to the commercial needs of the customers, for both passenger and...

IESM 2013, 5th international conference on industrial engineering and system management, Oct 2013, Rabat, Morocco. 10p. ⟨hal-00909588⟩

• Communication dans un congrès

Sociotechnical systems resilience : a dissonance engineering point of view

Jean-René Ruault, Frédéric Vanderhaegen, Christophe Kolski

Resilience deals with the capacity to adjust itself face disturbing events, to cope with unforeseeable conditions. Resilience is based upon the dynamic process of "visual piloting". The gap between the specified task and the done activity generates dissonance between beliefs and...

12th IFAC/IFIP/IFORS/IEA Symposium on Analysis, Design, and Evaluation of Human-Machine Systems, Aug 2013, Las Vegas, United States. pp.149-156, ⟨10.3182/20130811-5-US-2037.00042⟩. ⟨hal-03384711⟩