Publicaciones

Tipo de Documento

Palabras clave

Autor

De

Au

Affichage de 1831 à 1840 sur 5665

Communication dans un congrès

Optimization of an image-based experimental setup for the dynamic behaviour characterization of materials

Pascal Bouda, Delphine Notta-Cuvier, Bertrand Langrand, Eric Markiewicz, Fabrice Pierron

The present work aims at identifying an elastic-viscoplastic material constitutive model over a wide strain and strain-rate range (up to 0.1 and 1000 s−1 respectively), using the so-called Virtual Fields Method. To define the experimental campaign, a design process has been set. It relies on the...

2018 Annual Conference on Experimental and Applied Mechanics, Jun 2018, Greenville, United States. pp.153-155, ⟨10.1007/978-3-319-95089-1_28⟩. ⟨hal-03579457⟩

Article dans une revue

Anticipatory postural adjustment during gait initiation in multiple sclerosis patients: A systematic review

Caroline Massot, Emilie Simoneau-Buessinger, Olivier Agnani, Cécile Donzé, Sébastien Leteneur

Background: Multiple sclerosis (MS) causes balance and walking disorders. Gait initiation is the complex transition between standing and walking and is characterized by two distinct phases: the anticipatory postural adjustment (APA) phase followed by the execution of the first step phase. Research...

Gait & Posture, 2019, 73, pp.180-188. ⟨10.1016/j.gaitpost.2019.07.253⟩. ⟨hal-03462877⟩

Article dans une revue

Propagation of singularities in shells of non-uniform geometrical nature. A numerical investigation

Fabien Béchet

This paper deals with the propagation of singularities in thin elastic shells whose middle surface is not of an uniform nature. Numerical computations are performed using an adaptive mesh procedure proposed by the software Abaqus to refine the mesh inside the internal layers. The computation are...

European Journal of Mechanics - A/Solids, 2019, 74, pp.188-201. ⟨10.1016/j.euromechsol.2018.11.008⟩. ⟨hal-03612784⟩

Article dans une revue

An alternative LMI static output feedback control design for nonlinear systems represented by Takagi-Sugeno models

Víctor Estrada Manzo, Zsofia Lendek, Thierry-Marie Guerra

This paper presents a static output feedback controller design for discrete-time nonlinear systems exactly represented by Takagi–Sugeno models. By introducing past states in the control law as well as in the Lyapunov function, more relaxed results are obtained. Different conditions in terms of...

ISA Transactions, 2019, 84, pp.104-110. ⟨10.1016/j.isatra.2018.08.025⟩. ⟨hal-03405375⟩

Article dans une revue

Personalised lane keeping assist strategy: adaptation to driving style

Jagat Jyoti Rath, Chouki Sentouh, Jean-Christophe Popieul

The research in advanced driver assistance systems (ADAS) has progressed to design architectures for driver specific performance. Personalised ADASs in this aspect have been developed with adaptation to driver attributes, state, style, behaviour, skill and so on. For the lane keeping task, the...

IET Control Theory and Applications, 2019, 13 (1), pp.106-115. ⟨10.1049/iet-cta.2018.5941⟩. ⟨hal-03644349⟩

Article dans une revue

De l'optimisation des opérations à l’alignement stratégique

Said Hanafi, Michel Labour, Igor Crevits

L’alignement stratégique repose sur les deux phases d’adaptation de la stratégie et d’intégration fonctionnelle au sein de l’organisation qui présentent une dimension décisionnelle importante. Les technologies de l’information offrent un pouvoir structurant à l’organisation mais également de..., Strategic alignment relies on both adaption of strategy and functional integration inside the organisation which refer to decisions. Information technologies allow improving the structure of the organisation and offer new opportunities which can extend to the market outside the organisation....

Management des Technologies Organisationnelles (2014-..), 2019, 8, pp.87-99. ⟨hal-03402231⟩

Article dans une revue

Mean Square Consensus of Double-Integrator Multi-Agent Systems under Intermittent Control

Dylan Poulsen, Michael Defoort, Mohamed Djemai

We consider the leader–follower consensus problem for a multi-agent system where information is exchanged only on a non-uniform discrete stochastic time domain. For a second-order multi-agent system subject to intermittent information exchange, we model the tracking error dynamics as a μ−varying...

Journal of The Franklin Institute, 2019, 356 (16), pp.9076-9094. ⟨10.1016/j.jfranklin.2019.07.011⟩. ⟨hal-03405351⟩

Article dans une revue

Joining the blunt and the pointy end of the spear: towards a common framework of joint action, human–machine cooperation, cooperative guidance and control, shared, traded and supervisory control

Frank Flemisch, David Abbink, Makoto Itoh, Marie-Pierre Pacaux-Lemoine, Gina Wessel

To introduce this special issue of shared and cooperative control, we will look into history of tools in cooperation between humans and aim to unify the plethora of related concepts and definitions that have been proposed in recent years, such as shared control, human–machine cooperation and...

Cognition, Technology and Work, 2019, 21 (4), pp.555-568. ⟨10.1007/s10111-019-00576-1⟩. ⟨hal-03644221⟩

Chapitre d'ouvrage

Metal Forming and Lubrication

André Dubois, Abu N.M. Karim

In metal forming (cold or hot), localized compressive force is applied on the workpiece through a forming tool. This force leads to generate high contact pressures at the workpiece/tool interface and as a result the workpiece is deformed to deliver a desired shape and surface of the product. In...

Reference Module in Materials Science and Materials Engineering, Elsevier, 2019, 978-0-12-803581-8. ⟨10.1016/B978-0-12-803581-8.03565-7⟩. ⟨hal-03651843⟩

Article dans une revue

Material behaviour at low temperatures for calibrating cryogenic machining numerical simulations

Rachele Bertolini, Stefania Bruschi, Andrea Ghiotti, Grégory Haugou, Hervé Morvan, Laurent Dubar

Recently, cryogenic machining of difficult-to-cut alloys has been adopted to increase tool life and improve the machined components surface integrity. Numerical models of cryogenic machining are being developed to evaluate the influence of the different process parameters. Up to now, their...

Procedia CIRP, 2019, 82, pp.344-349. ⟨10.1016/j.procir.2019.04.160⟩. ⟨hal-03609147⟩