Publicaciones

• Article dans une revue

Dynamic evolution of interface roughness during friction and wear processes

K. J. Kubiak, Maxence Bigerelle, T. Mathia, André Dubois, Laurent Dubar

Dynamic evolution of surface roughness and influence of initial roughness (Sa = 0.282–6.73 µm) during friction and wear processes has been analyzed experimentally. The mirror polished and rough surfaces (28 samples in total) have been prepared by surface polishing on Ti–6Al–4V and AISI 1045 samples...

Scanning, 2014, 36 (1), pp.30-38. ⟨10.1002/sca.21082⟩. ⟨hal-03470665⟩

• Article dans une revue

Lighter tableware ceramic by controlling porosity: Effect of porosity on mechanical properties

Benjamin Verhaeghe, Christian Courtois, F. Petit, F. Cambier, Jean-Dominique Guerin, Anne Leriche, Stuart Hampshire

Reduction in weight of ceramics has been achieved by using a specific porous agent, starch, to achieve porosity ranging from 10% to 35%. Two incorporation routes of the porous agent have been investigated. For different levels of weight reduction, ceramics are characterized by microstructural...

Ceramics International, 2014, 40 (1), pp.763-770. ⟨10.1016/j.ceramint.2013.06.066⟩. ⟨hal-03448297⟩

• Article dans une revue

Sliding subspace design based on linear matrix inequalities

Alan Tapia, Raymundo Márquez Borbόn, Miguel Bernal, Joaquín Cortez

In this work, an alternative for sliding surface design based on linear and bilinear matrix inequalities is proposed. The methodology applies for reduced and integral sliding mode control, both continuous- and discrete-time; it takes advantage of the Finsler's lemma to provide a greater degree...

Kybernetika, 2014, 50 (3), pp.436-449. ⟨10.14736/kyb-2014-3-0436⟩. ⟨hal-03663763⟩

• Article dans une revue

Modélisation des performances d’un moteur Ericsson à cycle de joule ouvert

Marie Creyx, Eric Delacourt, Marc Lippert, Céline Morin, Bernard Desmet

The performances of an open Joule cycle Ericsson engine associated to a biomass micro-CHP unit are studied with a dynamic model impl emented with the bond graph formalis m. The dynamic phenomena of the expansion cylinder (pressure drops across the valves, th ermal losses through the cylinder wall,...

Revista Termotehnica, 2014, 1, pp.64-70. ⟨hal-03627090⟩

• Rapport

Rapport d’inspection ergonomique du système embarqué d’aide à l’exploitation et à la maintenance CITADIS ALSTOM

Mathieu Mouchel, Françoise Anceaux

[Rapport de recherche] LAMIH, Valenciennes. 2014. ⟨hal-03461663⟩

• Proceedings/Recueil des communications

Proceedings of 3rd International Conference on Advanced Logistics and Transport.

Adel M. Alimi, Mourad Abed, Mounir Benaissa, Mohamed Ben Halima, Habib Kammoun, Ali Wali

ICALT'2014, May 2014, Hammamet, Tunisia. 2014, 978-1-4799-4839-6. ⟨hal-03403046⟩

• Article dans une revue

Closed form solution for the collapse of polygonal thin-walled columns in the axial crushing case

Yamen Maalej, Fahmi Chaari, Bassem Zouari, Eric Markiewicz

The main objective of this paper is to propose a new closed form solution, useful in the pre-design stage, that allows one to calculate the mean load in the case of post-collapse of polygonal thin-walled columns in the axial crushing case. This model gives a rapid and accurate evolution of the...

Journal of Theoretical and Applied Mechanics, 2014, 52 (3), pp.707-718. ⟨hal-03663448⟩

• Article dans une revue

An evidential network approach to support uncertain multiviewpoint abductive reasoning

Felipe Aguirre, Mohamed Sallak, Frédéric Vanderhaegen, Denis Berdjag

The paper proposes an approach to support human abductive reasoning in the diagnosis of a multiviewpoint system. The novelty of this work lies on the capability of the approach to treat the uncertainty held by the agent performing the diagnosis. To do so, we make use of evidential networks to...

Information Sciences, 2013, 250, pp.110-125. ⟨10.1016/j.ins.2013.07.014⟩. ⟨hal-00917053⟩

• Thèse

Conception et commande d'une interface haptique à retour d'effort pour la CAO, Design and control of a force feedback haptic interface for applications in CAD systems

Quoc Viet Dang

Les interfaces haptiques à retour d’effort sont des dispositifs robotiques capables deproduire des forces à destination de l’utilisateur en téléopération et en réalité virtuelle. L’utilisation d’interface à retour d’effort en Conception Assistée par Ordinateur (CAO) offre de nouvelles perspectives..., Force feedback haptic interfaces are robotic devices which are able to produce forces for the user in a teleoperation or virtual reality context. The integration of force feedback haptic interfaces in Computer-Aided Design (CAD) systems offers new perspectives for modeling and design of 3D objects...

Autre. Université de Valenciennes et du Hainaut-Cambresis, 2013. Français. ⟨NNT : 2013VALE0042⟩. ⟨tel-00985356⟩

• Communication dans un congrès

Efficient FPGA implementation of H.264 CAVLC entropy decoder

Ali Siblini, Elias Michel Baaklini, Hassan Sbeity, Ahmad Fadlallah, Smail Niar

Multiprocessor-system-on-a-chip (MPSoC) is the dominating architecture in embedded systems. Applications need to be multi-threaded to benefit from the concurrency provided by the MPSoC. Many parallel versions of the new emerging H.264/AVC [1] already exist. However, providing a full parallel H.264...

2013 Design and Test Symposium (IDT), Dec 2013, Marrakesh, Morocco. pp.1-3, ⟨10.1109/IDT.2013.6727116⟩. ⟨hal-03472887⟩