Publicaciones

• Article dans une revue

Designing human–system cooperation in industry 4.0 with cognitive work analysis: a first evaluation

Marie-Pierre Pacaux-Lemoine, Quentin Berdal, Clément Guerin, Philippe Rauffet, Christine Chauvin, Damien Trentesaux

One objective of Industry 4.0 is to reach a better system performance as well as to have a better consideration of humans. This would be done by benefiting from knowledge and experience of humans, and balancing in a reactive way some complex or complicated tasks with intelligent systems. Several...

Cognition, Technology and Work, 2022, 24 (93–111), ⟨10.1007/s10111-021-00667-y⟩. ⟨hal-03157238⟩

• Article dans une revue

Distributed time-varying formation tracking of multi-quadrotor systems with partial aperiodic sampled data

Syed Ali Ajwad, Emmanuel Moulay, Michael Defoort, Tomas Menard, P. Coirault

In this article, a distributed formation tracking controller is proposed for Multi-Agent Systems (MAS) consisting of quadrotors. It is considered that each quadrotor in the MAS only shares its translation position information with its neighbors. Moreover, position information is transmitted at...

Nonlinear Dynamics, 2022, 108 (3), pp.2263-2278. ⟨10.1007/s11071-022-07294-w⟩. ⟨hal-03596635⟩

• Article dans une revue

Adaptive Backstepping Integral Sliding Mode Control Combined with Super-Twisting Algorithm For Nonlinear UAV Quadrotor System

Yakoub Nettari, Moussa Labbadi, Serkan Kurt

Quadrotors are extremely agile UAVs with many uncertainties related to their moment of inertia, drag coefficients, and mass. Besides aerodynamic turbulence, the quadrotor is rich in non-linearity due to its underactuated mechanical system. These last two factors lead to problems that require...

IFAC-PapersOnLine, 2022, 55 (12), pp.264-269. ⟨10.1016/j.ifacol.2022.07.322⟩. ⟨hal-03809821⟩

• Article dans une revue

Robust flight control for a quadrotor under external disturbances based on generic second order sliding mode control

Abdellah Benaddy, Moussa Labbadi, Mostafa Bouzi

This paper presents a novel robust second order sliding mode control (RSOSMC) for tracking controller of a quadrotor with external disturbances. In addition, in order to perform the position and attitude tracking control of the quadrotor perfectly, the dynamical model of the quadrotor is divided...

IFAC-PapersOnLine, 2022, 55 (12), pp.270-275. ⟨10.1016/j.ifacol.2022.07.323⟩. ⟨hal-03809822⟩

• Proceedings/Recueil des communications

Editorial - Gestion et ingénierie des systèmes hospitaliers à l’ère du numérique et des innovations organisation. GISEH 2020 - 10 ème Conférence Francophone en Gestion et Ingénierie des Systèmes Hospitaliers. Valenciennes, France, du 26-29 octobre 2020., Editorial - Management and engineering of hospital systems in the digital age and organizational innovations. GISEH 2020 - 10th Francophone Conference on Hospital Systems Management and Engineering. Valenciennes, France, from October 26-29, 2020.

Sondès Chaabane, Maria Di Mascolo, Franck Fontanili

Ce numéro spécial fait suite à la 10ème Conférence Francophone en Gestion et Ingénierie des Systèmes Hospitaliers – GISEH 2020 – qui a eu lieu à Valenciennes et en ligne en Octobre 2020.

• Chapitre d'ouvrage

Améliorer conjointement l'expérience de l'ensemble des parties prenantes de l'Hôpital 4.0 : l'initiative ICSSURP

Wilson Goudalo, Christophe Kolski, Frédéric Vanderhaegen

S. Chaabane, E. Cousein & P. Wieser (Eds.). Systèmes de soins et de santé : défis d'aujourd'hui et opportunités de demain, ISTE Editions, pp.176 - 189, 2022. ⟨hal-04842466⟩

• Communication dans un congrès

Numerical Simulator for Manual Wheelchair Propulsion based on a MPC Approach

Toufik Bentaleb, Amel Ait Ghezala, Chouki Sentouh, Philippe Pudlo

Quite recently, considerable attention has been paid to the concept of prediction of manual wheelchair locomotion by a predictive model simulation, with the aim of facilitating the synthesis of the biomechanics of propulsion movement and improving the wheelchair ergonomics. Generally, the...

4th IFAC Workshop on Cyber-Physical and Human Systems CPHS 2022, Dec 2022, Houston (Texas), United States. pp.154-159, ⟨10.1016/j.ifacol.2023.01.119⟩. ⟨hal-04481301⟩

• Article dans une revue

Online driver model parameter identification using the Lyapunov approach based shared control

Mohamed Radjeb Oudainia, Chouki Sentouh, Anh-Tu Nguyen, Jean-Christophe Popieul

The work described in this paper proposes a new conflict minimisation strategy in shared driving control for lane keeping systems (LKS) in intelligent vehicles. This strategy takes into account a dynamic driver model, where the driver’s parameters are identified online using the Lyapunov approach...., Le travail décrit dans cet article propose une nouvelle stratégie de minimisation des conflits dans le contrôle partagé de la conduite pour les systèmes de maintien de voie (LKS) dans les véhicules intelligents. Cette stratégie prend en compte un modèle de conducteur dynamique, où les paramètres du...

Frontiers in Control Engineering, 2022, 3, pp.1055915. ⟨10.3389/fcteg.2022.1055915⟩. ⟨hal-04261239⟩

• Article dans une revue

Validation of an Embedded Motion-Capture and EMG Setup for the Analysis of Musculoskeletal Disorder Risks during Manhole Cover Handling

Rémy Hubaut, Romain Guichard, Julia Greenfield, Mathias Blandeau

Musculoskeletal disorders in the workplace are a growing problem in Europe. The measurement of these disorders in a working environment presents multiple limitations concerning equipment and measurement reliability. The aim of this study was to evaluate the use of inertial measurement units against...

Sensors, 2022, 22 (2), pp.436. ⟨10.3390/s22020436⟩. ⟨hal-03691933⟩

• Article dans une revue

An exact approach to the integration of non-cyclical preventive maintenance scheduling and production planning for a series-parallel production system

Abdessamad Ait El Cadi, Nizar Elhachemi, Abdelhakim Artiba, Mohamed Anouar Jamali, Louis-Martin Rousseau

In this paper, we generalise a model for integrated noncyclical preventive maintenance scheduling and production planning from a single machine to a series-parallel production line. As for a single machine, we consider a set of products that must be produced in lots during a given time horizon. The...

International Journal of Operational Research, 2022, 44 (3), pp.401-414. ⟨10.1504/IJOR.2021.10028946⟩. ⟨hal-03400330⟩