Publicaciones

Tipo de Documento

Palabras clave

Autor

De

Au

Affichage de 2261 à 2270 sur 5630

Article dans une revue

Hybrid control design for limit cycle stabilisation of planar switched systems

Mohammed Benmiloud, Atallah Benalia, Mohamed Djemai, Michael Defoort

This paper addresses the control problem of an important class of hybrid dynamical systems where the desired state does not belong to the set of subsystem equilibria. Beyond the practical stabilisation where the system trajectory has to be driven to a neighbourhood of a desired state, a control law...

International Journal of Control, 2018, 91 (7), pp.1720-1729. ⟨10.1080/00207179.2017.1327723⟩. ⟨hal-03428129⟩

Communication dans un congrès

Time temperature equivalence for a mineral filled polymer for automotive applications

Vincent Dorleans, Franck Lauro, Rémi Delille, Sylvain Treutenaere, Delphine Notta-Cuvier, Bruno Bennani, Grégory Haugou, Benjamin Bourel, Éric Michau, Jean-David Thoby

Polymers are currently used in several industrial applications such as the interior components of the vehicle. We find them for example in the design of dashboards or door panels. These materials may be subjected to different types of load like the temperature variation or high strain rates due to...

12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading (DYMAT 2018), Sep 2018, Arcachon, France. pp.04011, ⟨10.1051/epjconf/201818304011⟩. ⟨hal-03674472⟩

Article dans une revue

Two-dimensional heat transfer coefficients with simultaneous flow visualisations during two-phase flow boiling in a PDMS microchannel

Sofia Korniliou, Coinneach Mackenzie-Dover, John R.E. Christy, Souad Harmand, Anthony J. Walton, Khellil Sefiane

Infrared (IR) thermography was combined with simultaneous high speed flow visualisation and pressure measurements from integrated pressure sensors inside the microchannel, in order to produce two-dimensional (2D) high spatial and temporal resolution two-phase heat transfer coefficient (HTC) maps...

Applied Thermal Engineering, 2018, 130, pp.624-636. ⟨10.1016/j.applthermaleng.2017.11.003⟩. ⟨hal-03450056⟩

Article dans une revue

Effect of robotic-assisted gait rehabilitation on dynamic equilibrium control in the gait of children with cerebral palsy

Laura Wallard, Gilles Dietrich, Y. Kerlirzin, Jonathan Bredin

Due to the intensity and repetition of movement, roboticassisted gait training therapy could have a beneficial effect on the recovery and improvement of postural and locomotor functions of the patient. This study sought to highlight the effects of robotic-assisted gait rehabilitation in gait of...

Gait & Posture, 2018, 60, pp.55-60. ⟨10.1016/j.gaitpost.2017.11.007⟩. ⟨hal-03464963⟩

Article dans une revue

An Analysis of Electroplated cBN Grinding Wheel Wear and Conditioning during Creep Feed Grinding of Aeronautical Alloys

Gorka Vidal Irusta, Naiara Ortega, Héctor Bravo, Mirentxu Dubar, Haizea González

Cubic boron nitride (cBN), in addition to diamond, is one of the two superabrasives most commonly used for grinding hard materials such as ceramics or difficult-to-cut metal alloys such as nickel-based aeronautical alloys. In the manufacturing process of turbine parts, electroplated cBN wheels are...

Metals, 2018, 8 (5), pp.350. ⟨10.3390/met8050350⟩. ⟨hal-03451113⟩

Article dans une revue

Reactive Power Dispatch Optimization with Voltage Profile Improvement Using an Efficient Hybrid Algorithm

Zahir Sahli, Abdelatif Hamouda, Abdelghani Bekrar, Damien Trentesaux

This paper presents an efficient approach for solving the optimal reactive power dispatch problem. It is a non-linear constrained optimization problem where two distinct objective functions are considered. The proposed approach is based on the hybridization of the particle swarm optimization method...

Energies, 2018, 11 (8), pp.2134. ⟨10.3390/en11082134⟩. ⟨hal-03428168⟩

Article dans une revue

Predicting the different engine parameters of a rubber seed oil-ethanol dual fuel engine using artificial neural networks

J. Femilda Josephin, Edwin Geo Varuvel, Ankit Sonthalia, C. Bharatiraja, Fethi Aloui

The present study investigates the potential of artificial neural network for predicting the performance and emission characteristics of a compression ignition (CI) engine. A number of experiments are performed using diesel, rubber seed oil (RSO) and its methyl ester (RSOME) as the primary fuel,...

International Journal of Global Warming, 2018, 16 (4), pp.485-506. ⟨10.1504/IJGW.2018.095995⟩. ⟨hal-03449858⟩

Communication dans un congrès

Performance indicators nomenclatures for decision making in sustainable conditions based maintenance

Olivier Sénéchal

The maintenance activity is by nature an important lever for action on the sustainability of production systems. To implement new performance indicators in this perspective involves to use data, information, and knowledge missing in the traditional maintenance environments, or at least not...

16th IFAC Symposium on Information Control Problems in Manufacturing, INCOM 2018, Jun 2018, Bergamo, Italy. pp.1137-1142, ⟨10.1016/j.ifacol.2018.08.438⟩. ⟨hal-03409344⟩

Communication dans un congrès

Functional and Corticomuscular Changes Associated with Early Phase of Motor Training

Sylvain Cremoux, Dimitri Elie, Cecilie Rovsing, Helene Rovsing, Mads Jochumsen, Heidi Haavik, Imran K. Niazi

This study aimed to evaluate the corticomuscular changes associated with motor training. We quantified functional and corticomuscular changes during a four-days motor training. Results revealed better functional performance and increased magnitude of corticomuscular coherence in the 8–13 Hz...

4th International Conference on NeuroRehabilitation, Oct 2018, Pisa, Italy. ⟨10.1007/978-3-030-01845-0_151⟩. ⟨hal-03462927⟩

Article dans une revue

Computational fluid dynamical analysis of new obstacle design and its impact on the heat transfer enhancement in a specific type of air flow geometry

Younes Menni, Ahmed Azzi, Faouzi Didi, Souad Harmand

The present work focuses on the study of an interesting topic from different points of view, that is, theoretical, practical, and numerical modeling. This study aims to improve the heat transfer within thermal devices like heat exchangers, solar air collectors, and other electronic equipment; these...

Computational Thermal Sciences: An International Journal, 2018, 10 (5), pp.421-447. ⟨10.1615/ComputThermalScien.2018024416⟩. ⟨hal-03450799⟩