Publicaciones

• Article dans une revue

A2PG: alternative action plan generator

Wided Ben Yahia, Frédéric Vanderhaegen, Philippe Polet, Nicolas Tricot

This study concerns the safety analysis of human-machine systems. Accidents are mainly caused by human operators' failure in complying with the equipment's safety rules. The aim of safety analysis was to evaluate the potential risks of a system. This analysis is usually based on a...

Cognition, Technology and Work, 2015, 17, pp.95-109. ⟨10.1007/s10111-014-0287-x⟩. ⟨hal-02600865⟩

• Rapport

Critères d’inclusions des sujets d’expérimentations à partir de l’enquête et de la synthèse bibliographique

François Gabrielli, Philippe Pudlo

[Rapport de recherche] LAMIH, Valenciennes. 2015. ⟨hal-03420760⟩

• Rapport

Analyse biomécanique préliminaire de l’interaction passager/siège dans le cas d’un passager à mobilité réduite (personnes âgées, personnes avec canne, personne en surpoids)

François Gabrielli, Philippe Pudlo

[Rapport de recherche] LAMIH, Valenciennes. 2015. ⟨hal-03420775⟩

• Communication dans un congrès

Towards a multi-criteria decision making approach for the selection of the distribution center under uncertain environment

Maroi Agrebi, Mourad Abed, Mohamed Nazih Omri

PhD Welcome Seminar, Jan 2015, Lille, France. ⟨hal-03519407⟩

• Communication dans un congrès

Scavenging Process Analysis in a 2-Stroke Engine by CFD Approach for a Parametric 0D Model Development

Stéphanie Cagin, Nachida Bourabaa, Eric Delacourt, Céline Morin, Xavier Fischer, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents a method to improve cylinder design of 2-stroke auto-ignition engine based on a CFD (Computational Fluid Dynamics) study of internal flows in the chamber and an unsteady global 0D parametric approach. In 2-stroke engine, scavenging process plays an important role regarding...

7th International Exergy, Energy and Environment Symposium (IEEES-7), Apr 2015, Valenciennes, France. ⟨10.36884/jafm.9.SI1.26397⟩. ⟨hal-01331189⟩

• Communication dans un congrès

Failure stress criterion for adhesively bonded joint at different strain rates by using dynamic Arcan test device

Ludovic Dufour, Benjamin Bourel, Franck Lauro, Grégory Haugou, Nicolas Leconte, Nicolas Carrere

The purpose of this work is to determine the failure criterion evolution of assembly bonded with a strain rate dependent adhesive. A new modified ARCAN device is then designed to obtain the average stress at failure under different loading angles and for strain up to 350 s −1. Tests are performed...

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.01024, ⟨10.1051/epjconf/20159401024⟩. ⟨hal-03433146⟩

• Communication dans un congrès

Dynamic recrystallization of spheroidal graphite iron during hot cutting operations.

Kevin Le Mercier, Michel Watremez, Laurence Fouilland-Paille, Laurent Dubar

The objective of the present paper is to analyse the dynamic recrystallization process occurring during the hot cutting of spheroidal graphite iron. In the first instance, hot cutting tests are performed with an orthogonal cutting test bench. The emergence of dynamic recrystallization is...

ESAFORM 2015, 2015, Graz, Austria. pp.1235-1240, ⟨10.4028/www.scientific.net/KEM.651-653.1235⟩. ⟨hal-01178172⟩

• Article dans une revue

Measurements of liquid film thickness of a wide horizontal co-current stratified air-water flow

François Touron, Larbi Labraga, Laurent Keirsbulck, Hervé Bratec

A horizontal co-current stratified two-phase flow was studied in a duct with a rectangular section. Its dimensions were such that the top and side walls did not influence the interfacial waves. The film thickness was almost of the millimeter. The Reynolds number based on the mean height and...

Thermal Science, 2015, 19 (2), pp.521-530. ⟨10.2298/TSCI120602212T⟩. ⟨hal-03452006⟩

• Chapitre d'ouvrage

Ubiquity, Multiple Devices and Tangibility

Káthia Marçal de Oliveira, Elizabeth Sucupira Furtado, Júlio Guido Militao, Rossana Maria de Castro Andrade, Leonardo Cunha de Miranda

I GranDIHC-BR — Grand Research Challenges in Human-Computer Interaction in Brazil, Brazilian Computer Society, pp.24-27, 2015, 978-85-7669-296-6. ⟨hal-03378934⟩

• Article dans une revue

The influence of an arm sling on sit-to-stand of hemiplegic subjects

Amal Saadé, François Gabrielli, Sebastien Paganelli, Philippe Pudlo, Mathieu Lempereur, Olivier Rémy-Néris

Computer Methods in Biomechanics and Biomedical Engineering, 2015, French Society of Biomechanics, 18 (sup1), pp.2050-2051. ⟨10.1080/10255842.2015.1069617⟩. ⟨hal-03659131⟩