Publicaciones

Tipo de Documento

Palabras clave

Autor

De

Au

Affichage de 3611 à 3620 sur 5635

Article dans une revue

Design of a device to induce swirling flow in pipes: A rational approach

François Beaubert, Halldor Pálsson, Sylvain Lalot, Isabelle Choquet, Hadrien Bauduin

In this study, a rational approach is proposed to design a device for inducing swirling flow in heat exchanger pipes, for improved efficiency in the laminar regime. First, 2D computational fluid dynamics results lead to select, among four profiles, the blade profile with the most favorable lift to...

Comptes Rendus. Mécanique, 2015, 343 (1), pp.1-12. ⟨10.1016/j.crme.2014.09.004⟩. ⟨hal-03452026⟩

Communication dans un congrès

Governance mechanism in control architectures for flexible manufacturing systems

José-Fernando Jimenez Gordillo, Abdelghani Bekrar, Damien Trentesaux, Gabriel Zambrano Rey, Paulo Leitão

Manufacturing systems, and specifically Flexible Manufacturing Systems (FMS), face the challenge of accomplish global optimal performance and reactiveness at dynamic manufacturing environments. For this reason, manufacturing control systems must incorporate mechanisms that support dynamic custom-...

15th IFAC Symposium on Information Control Problems in Manufacturing, May 2015, Ottawa, Canada. pp.1093-1098, ⟨10.1016/j.ifacol.2015.06.229⟩. ⟨hal-03416426⟩

Article dans une revue

Axisymmetric modeling of the thermal cooling, including radiation, of a circular glass disk

Norbert Siedow, Dominique Lochegnies, Fabien Béchet, Philippe Moreau, Hiroshi Wakatsuki, Nobuhiro Inoue

Achieving correct tempering in thin glass is very important to prevent undesired stress and breakage. Computer simulation can elucidate and control the tempering process. For semitransparent materials like glass, heat transfer by thermal radiation is substantial; for thick glass, it may dominate...

International Journal of Heat and Mass Transfer, 2015, 89, pp.414-424. ⟨10.1016/j.ijheatmasstransfer.2015.04.091⟩. ⟨hal-03276352⟩

Article dans une revue

An innovative procedure for characterising a coupled elastoplastic damage model of behaviour using the Virtual Fields Method

Delphine Notta-Cuvier, Bertrand Langrand, Franck Lauro, Eric Markiewicz

The characterisation of material behaviour models can be challenging, especially when dealing with strongly non-linear constitutive laws. Classical procedures are restricted to the treatment of homogeneous mechanical fields. They can therefore not be applied after strain localisation and behaviour...

International Journal of Solids and Structures, 2015, 69-70, pp.415-427. ⟨10.1016/j.ijsolstr.2015.05.009⟩. ⟨hal-01232504⟩

Article dans une revue

Smoothed finite element method implemented in a resultant eight-node solid-shell element for geometrical linear analysis

Xavier J-G Elie-Dit-Cosaque, Augustin Gakwaya, Hakim Naceur

A smoothed finite element method formulation for the resultant eight-node solid-shell element is presented in this paper for geometrical linear analysis. The smoothing process is successfully performed on the element mid-surface to deal with the membrane and bending effects of the stiffness matrix...

Computational Mechanics, 2015, 55 (1), pp.105-126. ⟨10.1007/s00466-014-1085-2⟩. ⟨hal-01348306⟩

Article dans une revue

Effects of robotic gait rehabilitation on biomechanical parameters in the chronic hemiplegic patients, Effets de la rééducation robotisée à la marche sur les paramètres biomécaniques de la marche chez des patients hémiplégiques chroniques

Laura Wallard, Gilles Dietrich, Yves Kerlirzin, Jonathan Bredin

Hemiplegia is a more or less complete loss of hemibody voluntary motricity following a brain injury, usually resulting in alterations of the locomotor system with persistent disorders of movement and posture. We were interested in studying the gait pattern called "stiff knee gait" with..., L’hémiplégie est une perte plus ou moins complète de la motricité volontaire d’un hémicorps suite à une lésion cérébrale, entraînant généralement des altérations de l’appareil locomoteur avec des troubles persistants du mouvement et de la posture. Nous nous sommes intéressés, pour cette étude, au...

Neurophysiologie Clinique = Clinical Neurophysiology, 2015, 45 (3), pp.215-219. ⟨10.1016/j.neucli.2015.03.002⟩. ⟨hal-03465478⟩

Article dans une revue

Bilateral Strength Deficit Is Not Neural in Origin; Rather Due to Dynamometer Mechanical Configuration

Emilie Simoneau-Buessinger, Sebastien Leteneur, Anis Toumi, Alexandra Dessurne, François Gabrielli, Franck Barbier, Jennifer Jakobi

During maximal contractions, the sum of forces exerted by homonymous muscles unilaterally is typically higher than the sum of forces exerted by the same muscles bilaterally. However, the underlying mechanism(s) of this phenomenon, which is known as the bilateral strength deficit, remain equivocal....

PLoS ONE, 2015, 10 (12), pp.e0145077. ⟨10.1371/journal.pone.0145077⟩. ⟨hal-03464838⟩

Article dans une revue

Evaluating User Interface Adaptation using the Context of Use

Makram Soui, Khaled Ghedira, Mourad Abed

The aim of adaptive user interface is to provide different layouts and relevant information according to the current context-of-use (users, platforms and environments). Today, these systems are indispensable to those who want to retrieve appropriate information with less effort at anytime and...

International Journal of Adaptive, Resilient and Autonomic Systems , 2015, 6 (1), pp.1-24. ⟨10.4018/IJARAS.2015010101⟩. ⟨hal-03401544⟩

Communication dans un congrès

Transmitted torque observer applied to real time engine and clutch torque estimation

Rémi Losero, Jimmy Lauber, Thierry-Marie Guerra

In automation control system applications, the transmitted engine and clutch torque are unavoidable information for the control strategies. For example, these information are required to engine control, hybrid vehicle and automated transmission management. An angular domain discrete observer is...

1st IFAC Workshop on Linear Parameter Varying Systems LPVS 2015, Oct 2015, Grenoble, France. pp.73-78, ⟨10.1016/j.ifacol.2015.11.116⟩. ⟨hal-03659494⟩

Communication dans un congrès

Thermal effect of the welding process on the dynamic behavior of the HSS constitutive materials of a fillet welded joint

Julien Carrier, Eric Markiewicz, Grégory Haugou, David Lebaillif, Nicolas Leconte, Hakim Naceur

Welded joints, due to their manufacturing process, are commonly weakened areas. This study analyses the dynamic behavior of the Base Metal (BM) and the Heat-Affected Zone (HAZ) of an HSS (High Strength Steel) fillet welded joint. Firstly, a specific approach has been developed to generate the HAZ...

CFM 2015 - 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France. ⟨hal-03446151⟩