Publicaciones

• Article dans une revue

Closed form solution for the collapse of polygonal thin-walled columns in the axial crushing case

Yamen Maalej, Fahmi Chaari, Bassem Zouari, Eric Markiewicz

The main objective of this paper is to propose a new closed form solution, useful in the pre-design stage, that allows one to calculate the mean load in the case of post-collapse of polygonal thin-walled columns in the axial crushing case. This model gives a rapid and accurate evolution of the...

Journal of Theoretical and Applied Mechanics, 2014, 52 (3), pp.707-718. ⟨hal-03663448⟩

• Chapitre d'ouvrage

Are intelligent manufacturing systems sustainable?

André Thomas, Damien Trentesaux

This paper introduces and opens the debate on the role of “product-driven control” and, on a broader level, Intelligent Manufacturing and Services Systems in sustainable development and circular economy. First, the concept of IMS and perspectives relating to future industrial and economic systems,...

Theodor Borangiu and Damien Trentesaux and André Thomas. Service Orientation in Holonic and Multi-Agent Manufacturing and Robotics, 544, Springer International Publishing, pp.3-14, 2014, Studies in Computational Intelligence, 978-3-319-04735-5. ⟨10.1007/978-3-319-04735-5_1⟩. ⟨hal-03470266⟩

• Communication dans un congrès

Towards a Context Model for Human-Centered Design of Contextual Data Entry Systems in Healthcare Domain

Maxime Baas, Stéphanie Bernonville, Nathalie Bricon-Souf, Sylvain Hassler, Christophe Kolski, Guy Andre Boy

Data entry by physicians is a critical aspect in the health care domain, in which errors may lead to severe consequences for patients. This paper describes and discusses these aspects to support human-centered design of appropriate human-computer interaction technology. The following issues will be...

HCI International 2014, Jun 2014, Heraklion (CR), Greece. pp.223-233, ⟨10.1007/978-3-319-07515-0_23⟩. ⟨hal-03659721⟩

• Article dans une revue

Ternary Zero Correlation Zone Sequence Sets for Asynchronous DS-CDMA

Benattou Fassi, Ali Djebbari, Abdelmalik Taleb-Ahmed

In this paper we propose a new class of ternary Zero Correlation Zone (ZCZ) sequence sets based on binary ZCZ sequence sets construction. It is shown that the proposed ternary ZCZ sequence sets can reach the upper bound on the ZCZ sequences. The performance of the proposed sequences set in...

Communications and Network, 2014, 06 (04), pp.209-217. ⟨10.4236/cn.2014.64023⟩. ⟨hal-03644466⟩

• Article dans une revue

Dynamic evolution of interface roughness during friction and wear processes

K. J. Kubiak, Maxence Bigerelle, T. Mathia, André Dubois, Laurent Dubar

Dynamic evolution of surface roughness and influence of initial roughness (Sa = 0.282–6.73 µm) during friction and wear processes has been analyzed experimentally. The mirror polished and rough surfaces (28 samples in total) have been prepared by surface polishing on Ti–6Al–4V and AISI 1045 samples...

Scanning, 2014, 36 (1), pp.30-38. ⟨10.1002/sca.21082⟩. ⟨hal-03470665⟩

• Article dans une revue

Lighter tableware ceramic by controlling porosity: Effect of porosity on mechanical properties

Benjamin Verhaeghe, Christian Courtois, F. Petit, F. Cambier, Jean-Dominique Guerin, Anne Leriche, Stuart Hampshire

Reduction in weight of ceramics has been achieved by using a specific porous agent, starch, to achieve porosity ranging from 10% to 35%. Two incorporation routes of the porous agent have been investigated. For different levels of weight reduction, ceramics are characterized by microstructural...

Ceramics International, 2014, 40 (1), pp.763-770. ⟨10.1016/j.ceramint.2013.06.066⟩. ⟨hal-03448297⟩

• Article dans une revue

Sliding subspace design based on linear matrix inequalities

Alan Tapia, Raymundo Márquez Borbόn, Miguel Bernal, Joaquín Cortez

In this work, an alternative for sliding surface design based on linear and bilinear matrix inequalities is proposed. The methodology applies for reduced and integral sliding mode control, both continuous- and discrete-time; it takes advantage of the Finsler's lemma to provide a greater degree...

Kybernetika, 2014, 50 (3), pp.436-449. ⟨10.14736/kyb-2014-3-0436⟩. ⟨hal-03663763⟩

• Article dans une revue

Modélisation des performances d’un moteur Ericsson à cycle de joule ouvert

Marie Creyx, Eric Delacourt, Marc Lippert, Céline Morin, Bernard Desmet

The performances of an open Joule cycle Ericsson engine associated to a biomass micro-CHP unit are studied with a dynamic model impl emented with the bond graph formalis m. The dynamic phenomena of the expansion cylinder (pressure drops across the valves, th ermal losses through the cylinder wall,...

Revista Termotehnica, 2014, 1, pp.64-70. ⟨hal-03627090⟩

• Rapport

Rapport d’inspection ergonomique du système embarqué d’aide à l’exploitation et à la maintenance CITADIS ALSTOM

Mathieu Mouchel, Françoise Anceaux

[Rapport de recherche] LAMIH, Valenciennes. 2014. ⟨hal-03461663⟩

• Proceedings/Recueil des communications

Proceedings of 3rd International Conference on Advanced Logistics and Transport.

Adel M. Alimi, Mourad Abed, Mounir Benaissa, Mohamed Ben Halima, Habib Kammoun, Ali Wali

ICALT'2014, May 2014, Hammamet, Tunisia. 2014, 978-1-4799-4839-6. ⟨hal-03403046⟩