Publicaciones

• Article dans une revue

Distributed Consensus Observer for Multiagent Systems With High-Order Integrator Dynamics

Zongyu Zuo, Michael Defoort, Bailing Tian, Zhengtao Ding

This article presents a distributed consensus observer for multiagent systems with high-order integrator dynamics to estimate the leader state. Stability analysis is carefully studied to explore the convergence properties under undirected and directed communication, respectively. Using Lyapunov...

IEEE Transactions on Automatic Control, 2020, 65 (4), pp.1771-1778. ⟨10.1109/TAC.2019.2936555⟩. ⟨hal-03424633⟩

• Article dans une revue

Semelles de posture et prévention de la chute chez la personne âgée, Soles for posture and prevention of falls in the elderly person

Frédéric Viseux, Sylvie Villeneuve-Parpay

La chute chez la personne âgée de plus de 60 ans est associée à des déficiences sensorielles, neuromusculaires et ostéo-articulaires. La prise en charge par semelles de posture constitue un atout majeur dans la prévention du risque de chute de nos aînés. Elle fait suite à une investigation...

Revue du Podologue, 2020, 16 (91), pp.17-20. ⟨10.1016/j.revpod.2019.12.008⟩. ⟨hal-03465509⟩

• Article dans une revue

Study of transient condensation occurring during the starting of the evaporation of a droplet deposited on a heated substrate

Dorra Khilifi, Walid Foudhil, Kamel Fahem, Souad Harmand, Sadok Ben Jabrallah

The evaporation of a drop deposited on a heated substrate is a complex process, which combines several phenomena such as the Marangoni effect, mass and thermal transfers, etc. We developed, in this paper, a mathematical model and a numerical simulation code used to carry out an in-depth study about...

Thermal Science, 2020, 24 (6 Part B), pp.4075-4087. ⟨10.2298/TSCI181122377K⟩. ⟨hal-03579860⟩

• Communication dans un congrès

The concept of "safety bubble" to build ethical reconfigurable assembly systems

Thierry Berger, Thérèse Bonte, Jean-Jacques Santin, Yves Sallez

In the last decade, Reconfigurable Manufacturing Systems (RMS) have been proposed to deal with mass-customization problems and volatile markets. Applied to the field of assembly, this concept gives rise to Reconfigurable Assembly Systems (RAS). The latter are composed of different basic units (e.g...

21st IFAC world congress, Jul 2020, Berlin, Germany. pp.17023-17028, ⟨10.1016/j.ifacol.2020.12.1487⟩. ⟨hal-03367302⟩

• Article dans une revue

Lattice Strain Evolutions in Ni-W Alloys during a Tensile Test Combined with Synchrotron X-ray Diffraction

Tarik Sadat, Damien Faurie, Dominique Thiaudière, Cristian Mocuta, David Tingaud, Guy Dirras

Ni and Ni(W) solid solution of bulk Ni and Ni-W alloys (Ni-10W, Ni-30W, and Ni-50W) (wt%) were mechanically compared through the evolution of their {111} X-ray diffraction peaks during in situ tensile tests on the DiffAbs beamline at the Synchrotron SOLEIL. A significant difference in terms of...

Materials, 2020, 13 (18), pp.4027. ⟨10.3390/ma13184027⟩. ⟨hal-03449197⟩

• Ouvrages

Droit et robots – Droit science-fictionnel et fictions du droit

Frederique Berrod, Philippe Clermont, Damien Trentesaux

Presses universitaires de Valenciennes, 254 p., 2020, Synergie, 978-2-36424-070-4. ⟨hal-02954281⟩

• Communication dans un congrès

Vehicles Tracking by Combining Convolutional Neural Network Based Segmentation and Optical Flow Estimation

Tuan-Hung Vu, Jacques Boonaert, Sebastien Ambellouis, Abdelmalik Taleb-Ahmed

Object tracking is an important proxy task towards action recognition. The recent successful CNN models for detection and segmentation, such as Faster R-CNN and Mask R-CNN lead to an effective approach for tracking problem: tracking-by-detection. This very fast type of tracker takes into account...

ACIVS 2020, 20th International Conference on Advanced Concepts for Intelligent Vision Systems, Feb 2020, Auckland, New Zealand. pp529-540, ⟨10.1007/978-3-030-40605-9_45⟩. ⟨hal-02960349⟩

• Chapitre d'ouvrage

Modeling and Optimization in Manufacturing by Hydroforming and Stamping

Hakim Naceur, Waseem Arif

Hydroforming and stamping processes are important in several industrial sectors, and the simulation of these processes needs to be continuously enhanced. Since the last recent years, new challenging expectations have arisen regarding a higher level of quality commitment of sheet metal forming parts...

J. Jiang; C. Pruncu. Modeling and Optimization in Manufacturing, Wiley-VCH Verlag GmbH & Co. KGaA, pp.13-47, 2020, 978-3-527-34694-3. ⟨10.1002/9783527825233.ch1⟩. ⟨hal-03431993⟩

• Rapport

Tabu Search for a Parallel-Machine Scheduling Problem with Job Rejection, Inventory Penalties and Periodic Maintenance.

Hanane Krim, Nicolas Zufferey, Jean-Yves Potvin

We consider in this work a bicriteria scheduling problem on two different parallel machines with a periodic preventive maintenance policy. The two objectives considered involve minimization of job rejection costs and weighted sum of completion times. They are handled through a lexicographic...

[Research Report] CIRRELT; LAMIH, Université Polytechnique des Hauts-de-France. 2020. ⟨hal-03388837⟩

• Proceedings/Recueil des communications

Tangible interaction on RFID tabletops in centralized and distributed contexts

Christophe Kolski

Tutorial, 19th Brazilian Symposium on Software Quality, Dec 2020, Brazil. 2020. ⟨hal-03388544⟩