Publicaciones

• Article dans une revue

Benchmarking Flexible Job-Shop Scheduling and Control Systems

Damien Trentesaux, Cyrille Pach, Abdelghani Bekrar, Yves Sallez, Thierry Berger, Thérèse Bonte, Paulo Leitão, José Barbosa

Benchmarking is comparing the output of different systems for a given set of input data in order to improve the system's performance. Faced with the lack of realistic and operational benchmarks that can be used for testing optimization methods and control systems in flexible systems, this...

Control Engineering Practice, 2013, 21 (9), pp.1204-1225. ⟨10.1016/j.conengprac.2013.05.004⟩. ⟨hal-03405597⟩

• Article dans une revue

Using the BCD model for risk analysis

Karima Sedki, Philippe Polet, Frédéric Vanderhaegen

In this paper, we are interested in addressing risk analysis. We propose an influence diagram-based approach that focuses on a Benefit, Cost, Deficit (BCD) model. The BCD model is proposed for studying the intentional deviant behaviors of human operators in a system. In this model, the consequences...

Engineering Applications of Artificial Intelligence, 2013, 26 (9), pp.2172-2183. ⟨10.1016/j.engappai.2013.06.009⟩. ⟨hal-03405576⟩

• Chapitre d'ouvrage

Estimation of Road Adhesion Coefficient Using Higher-Order Sliding Mode Observer for Torsional Tyre Model

Jagat Jyoti Rath, Kalyana Chakravarthy Veluvolu, D. Zhang, Q. Zhang, Michael Defoort

The estimation of friction coefficient for a vehicle when it traverses on different surfaces has been an important issue. In this paper, a super-twisting algorithm based sliding mode observer is proposed to estimate the road adhesion coefficient, treated as an unknown input in the dynamics of a...

Intelligent Robotics and Applications, 8103, Springer Berlin Heidelberg, pp.202-213, 2013, Lecture Notes in Computer Science, ⟨10.1007/978-3-642-40849-6_18⟩. ⟨hal-03621911⟩

• Article dans une revue

Variable neighborhood search for location routing

Bassem Jarboui, Houda Derbel, Said Hanafi, Nenad Mladenovic

In this paper we propose various neighborhood search heuristics (VNS) for solving the location routing problem with multiple capacitated depots and one uncapacitated vehicle per depot. The objective is to find depot locations and to design least cost routes for vehicles. We integrate a variable...

Computers and Operations Research, 2013, 40 (1), pp.47-57. ⟨10.1016/j.cor.2012.05.009⟩. ⟨hal-03594471⟩

• Ouvrages

Ergonomie des Systèmes Homme-machine

Patrick Millot

Patrick Millot. Hermès science publications. Lavoisier, 386 pp., 2013, 978-2-7462-3920-3. ⟨hal-03467984⟩

• Article dans une revue

Armouring solutions against high velocity impact using 2D laminates and 3D warp interlock composites

Benjamin Provost, François Boussu, Daniel Coutellier, Daniel Vallée, Fabien Rondot, Julien Nussbaum

Since the emergence of the first armoured vehicles on battlefields, armour shield was mainly centred on conventional metallic materials, widespread solutions nowadays. For a long time, weight reduction in armoured protection, which represents the largest part of the vehicle’s overall weight, has...

Journal of Industrial Textiles, 2013, ⟨10.1177/1528083713498914⟩. ⟨hal-03644392⟩

• Communication dans un congrès

Des Honeypots Mobiles Pour La Sécurité Proactive des Réseaux Ad Hoc Véhiculaires (VANETs)

Dhavy Gantsou, Patrick Sondi Obwang

Colloque international TELECOM’2013 & 8ème JFMMA, 2013, Marrakech, Maroc. ⟨hal-03577439⟩

• Article dans une revue

Investigation of the performance of modified TCM scheme for the protection of SPIHT-based compressed images over fading channel

Mohamed Ben Aissa, Abdesselam Bassou, Mohammed Beladgham, Abdelmalik Taleb-Ahmed, Abdelmounaim Moulay Lakhdar

In this paper, a new variant of trellis-coded modulation with Ungerboeck-Gray mapping 'TCM-UGM' is presented for spectral efficiency of 2 bit/s/Hz. The performance of this encoding scheme is investigated over Rayleigh fading channel. The simulation result, using 16-state TCM-UGM encoder,...

International Review on Computers and Software (IRECOS), 2013, 8 (1), pp.271-276. ⟨hal-03507984⟩

• Article dans une revue

Liquid hydrocarbon fuels from fish oil industrial residues by catalytic cracking

Nadia Mrad, Maria Paraschiv, Fethi Aloui, Edwin Geo Varuvel, Mohand Tazerout, Sassi Ben Nasrallah

In the present work, catalytic cracking of fish oil industrial residue was investigated to study the effect of temperature, type of catalyst and the heating rate on the yield of organic liquid fraction (OLF) and its acid value. The highest bio-oil yield of 72% (wt.) was obtained at temperature...

International Journal of Energy Research, 2013, 37 (9), pp.1036-1043. ⟨10.1002/er.2906⟩. ⟨hal-00935904⟩

• Article dans une revue

Plastic deformation of structural steels under hot-working conditions

Eli Saúl Puchi-Cabrera, Jean-Dominique Guerin, Damien Barbier, Mirentxu Dubar, Jacky Lesage

The present study has been conducted in order to formulate a rational description of the flow stress of structural steels, when these are deformed in tension under hot-working conditions. The simplified formulation that has been developed only involves the analysis of the positive work-hardening...

Materials Science and Engineering: A, 2013, 559, pp.268-275. ⟨10.1016/j.msea.2012.08.097⟩. ⟨hal-00742740⟩