Publicaciones

• Communication dans un congrès

Validation of a new numerical weaving tool highlighting the influence of real yarn positions and shapes on their behaviour under impact

Mickael Lequin, E. Ferry, Benjamin Provost, Daniel Coutellier, François Boussu

In this study, a numerical simulation approach is used to measure the influence of yarn positions inside a 3D warp interlock fabric submitted to impact. Four numerical results have been compared to one experimental impact test. A first simulation is made directly from the experimental tomographic...

13th AUTEX World Textile Conference, May 2013, Dresde, Germany. ⟨hal-03512879⟩

• Communication dans un congrès

Holonic recursiveness with multi-agent system technologies

Sonia Suárez, Paulo Leitão, Emmanuel Adam

Recursive Systems are often needed or recommended for automatically deploy or build a software system composed of multiple entities on a large network, or on distributed locations, without a central control. We use the recursive definitions proposed in holonic systems, as the recursiveness is an...

11th International Conference on Practical Applications of Agents and multi-Agents systems, May 2013, Salamanque, Spain. pp.103-111, 978-3-319-00562-1, ⟨10.1007/978-3-319-00563-8_13⟩. ⟨hal-03472711⟩

• Article dans une revue

Design guidelines for quality of service support in Optimized Link State Routing-based mobile ad hoc networks

Patrick Sondi, Dhavy Gantsou, Sylvain Lecomte

he proposals for quality of service in mobile ad hoc networks have focused on adding QoS mechanisms in best-effort routing protocols while keeping the same assumptions regarding both the network representation and the routing protocol design. Most of the solutions concentrate the algorithmic effort...

Ad Hoc Networks, 2013, 11 (1), pp.298-323. ⟨10.1016/j.adhoc.2012.06.001⟩. ⟨hal-03451428⟩

• Article dans une revue

Benchmarking Flexible Job-Shop Scheduling and Control Systems

Damien Trentesaux, Cyrille Pach, Abdelghani Bekrar, Yves Sallez, Thierry Berger, Thérèse Bonte, Paulo Leitão, José Barbosa

Benchmarking is comparing the output of different systems for a given set of input data in order to improve the system's performance. Faced with the lack of realistic and operational benchmarks that can be used for testing optimization methods and control systems in flexible systems, this...

Control Engineering Practice, 2013, 21 (9), pp.1204-1225. ⟨10.1016/j.conengprac.2013.05.004⟩. ⟨hal-03405597⟩

• Article dans une revue

Using the BCD model for risk analysis

Karima Sedki, Philippe Polet, Frédéric Vanderhaegen

In this paper, we are interested in addressing risk analysis. We propose an influence diagram-based approach that focuses on a Benefit, Cost, Deficit (BCD) model. The BCD model is proposed for studying the intentional deviant behaviors of human operators in a system. In this model, the consequences...

Engineering Applications of Artificial Intelligence, 2013, 26 (9), pp.2172-2183. ⟨10.1016/j.engappai.2013.06.009⟩. ⟨hal-03405576⟩

• Article dans une revue

Assessment of ship maneuverability by using a coupling between a nonlinear transient ship maneuvering model and mathematical programming techniques

T. Tran Khanh, Abdellatif Ouahsine, Hakim Naceur, Karima El Wassifi

In this paper, a numerical method based on a coupling between a mathematical model of nonlinear transient ship manoeuvring motion in the horizontal plane and Mathematical Programming (MP) techniques is proposed. The aim of the proposed procedure is an efficient estimation of optimal ship...

Journal of Hydrodynamics, 2013, 25 (5), pp.788-804. ⟨10.1016/S1001-6058(13)60426-6⟩. ⟨hal-03629803⟩

• Communication dans un congrès

Application of a Co-evolutionary Genetic Algorithm to solve the Periodic Railway Timetabling Problem

Luis Diego Arenas Pimentel, Rémy Chevrier, Clarisse Dhaenens, Said Hanafi, Joaquin Rodriguez

In train operations, a timetable is used to establish the departure and arrival times for the trains at the stations or other relevant locations in the rail network or a subset of this network. The elaboration of a timetable responds to the commercial needs of the customers, for both passenger and...

IESM 2013, 5th international conference on industrial engineering and system management, Oct 2013, Rabat, Morocco. 10p. ⟨hal-00909588⟩

• Article dans une revue

Roughness signature of tribological contact calculated by a new method of peaks curvature radius estimation on fractal surfaces

Maxence Bigerelle, Jean-Marie Nianga, Denis Najjar, Alain Iost, Cédric Hubert, K. J. Kubiak

This paper proposes a new method of roughness peaks curvature radii calculation and its application to tribological contact analysis as characteristic signature of tribological contact. This method is introduced via the classical approach of the calculation of radius of asperity. In fact, the...

Tribology International, 2013, 65 (65), pp.235-247. ⟨10.1016/j.triboint.2013.03.017⟩. ⟨hal-01065878⟩

• Chapitre d'ouvrage

Context-Aware MDA Approach for Content Personalization in User Interface Development

Káthia Marçal de Oliveira, Firas Bacha, Mourad Abed

Progressions and Innovations in Model-Driven Software Engineering, pp.88-105, 2013. ⟨hal-03379056⟩

• Article dans une revue

Plastic deformation of structural steels under hot-working conditions

Eli Saúl Puchi-Cabrera, Jean-Dominique Guerin, Damien Barbier, Mirentxu Dubar, Jacky Lesage

The present study has been conducted in order to formulate a rational description of the flow stress of structural steels, when these are deformed in tension under hot-working conditions. The simplified formulation that has been developed only involves the analysis of the positive work-hardening...

Materials Science and Engineering: A, 2013, 559, pp.268-275. ⟨10.1016/j.msea.2012.08.097⟩. ⟨hal-00742740⟩