Publicaciones

• Article dans une revue

Predicting the different engine parameters of a rubber seed oil-ethanol dual fuel engine using artificial neural networks

J. Femilda Josephin, Edwin Geo Varuvel, Ankit Sonthalia, C. Bharatiraja, Fethi Aloui

The present study investigates the potential of artificial neural network for predicting the performance and emission characteristics of a compression ignition (CI) engine. A number of experiments are performed using diesel, rubber seed oil (RSO) and its methyl ester (RSOME) as the primary fuel,...

International Journal of Global Warming, 2018, 16 (4), pp.485-506. ⟨10.1504/IJGW.2018.095995⟩. ⟨hal-03449858⟩

• Article dans une revue

Hybrid control design for limit cycle stabilisation of planar switched systems

Mohammed Benmiloud, Atallah Benalia, Mohamed Djemai, Michael Defoort

This paper addresses the control problem of an important class of hybrid dynamical systems where the desired state does not belong to the set of subsystem equilibria. Beyond the practical stabilisation where the system trajectory has to be driven to a neighbourhood of a desired state, a control law...

International Journal of Control, 2018, 91 (7), pp.1720-1729. ⟨10.1080/00207179.2017.1327723⟩. ⟨hal-03428129⟩

• Article dans une revue

Reactive Power Dispatch Optimization with Voltage Profile Improvement Using an Efficient Hybrid Algorithm

Zahir Sahli, Abdelatif Hamouda, Abdelghani Bekrar, Damien Trentesaux

This paper presents an efficient approach for solving the optimal reactive power dispatch problem. It is a non-linear constrained optimization problem where two distinct objective functions are considered. The proposed approach is based on the hybridization of the particle swarm optimization method...

Energies, 2018, 11 (8), pp.2134. ⟨10.3390/en11082134⟩. ⟨hal-03428168⟩

• Article dans une revue

Two-dimensional heat transfer coefficients with simultaneous flow visualisations during two-phase flow boiling in a PDMS microchannel

Sofia Korniliou, Coinneach Mackenzie-Dover, John R.E. Christy, Souad Harmand, Anthony J. Walton, Khellil Sefiane

Infrared (IR) thermography was combined with simultaneous high speed flow visualisation and pressure measurements from integrated pressure sensors inside the microchannel, in order to produce two-dimensional (2D) high spatial and temporal resolution two-phase heat transfer coefficient (HTC) maps...

Applied Thermal Engineering, 2018, 130, pp.624-636. ⟨10.1016/j.applthermaleng.2017.11.003⟩. ⟨hal-03450056⟩

• Communication dans un congrès

Experimental study of the mechanical strength and the failure of multi-sheet, multi-material spot-welded assemblies under pure and combined loading conditions

Rim Chtourou, Fahmi Chaari, Grégory Haugou, Nicolas Leconte, Eric Markiewicz, Bassem Zouari

Resistance Spot Welding (RSW) is widely used in the automotive industry thanks to its production convenience and cost effectiveness. Around four thousands spot welds are indeed employed to assemble the body-in-white. RSW of multiple sheets and combining multiple materials are increasingly realized...

12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading (DYMAT 2018), Sep 2018, Arcachon, France. pp.02009, ⟨10.1051/epjconf/201818302009⟩. ⟨hal-03433309⟩

• Article dans une revue

An Analysis of Electroplated cBN Grinding Wheel Wear and Conditioning during Creep Feed Grinding of Aeronautical Alloys

Gorka Vidal Irusta, Naiara Ortega, Héctor Bravo, Mirentxu Dubar, Haizea González

Cubic boron nitride (cBN), in addition to diamond, is one of the two superabrasives most commonly used for grinding hard materials such as ceramics or difficult-to-cut metal alloys such as nickel-based aeronautical alloys. In the manufacturing process of turbine parts, electroplated cBN wheels are...

Metals, 2018, 8 (5), pp.350. ⟨10.3390/met8050350⟩. ⟨hal-03451113⟩

• Ouvrages

Proceedings of the 13th International Symposium on Reconfigurable Communication-centric Systems-on-Chip (ReCoSoC)

Smail Niar, Mazen Saghir, Giuseppe Lipari, Özcan Özturk

2018. ⟨hal-03403076⟩

• Article dans une revue

Effect of robotic-assisted gait rehabilitation on dynamic equilibrium control in the gait of children with cerebral palsy

Laura Wallard, Gilles Dietrich, Y. Kerlirzin, Jonathan Bredin

Due to the intensity and repetition of movement, roboticassisted gait training therapy could have a beneficial effect on the recovery and improvement of postural and locomotor functions of the patient. This study sought to highlight the effects of robotic-assisted gait rehabilitation in gait of...

Gait & Posture, 2018, 60, pp.55-60. ⟨10.1016/j.gaitpost.2017.11.007⟩. ⟨hal-03464963⟩

• Article dans une revue

LMI-Based Controller Design for Time-Delay Nonlinear Descriptor Systems with Guaranteed Exponential Estimates

Juan Carlos Arceo Luzanilla, Raúl Villafuerte, Víctor Estrada Manzo, Miguel Bernal

This report is concerned with stability and stabilization of time-delay nonlinear nonsigular descriptor systems. Based-on a Lyapunov-Krasovskii functional and an exact convex representation of the system, conditions in the form of linear matrix inequalities are found that guarantee exponential...

IFAC-PapersOnLine, 2018, 51 (13), pp.585-590. ⟨10.1016/j.ifacol.2018.07.343⟩. ⟨hal-03671705⟩

• Communication dans un congrès

Functional and Corticomuscular Changes Associated with Early Phase of Motor Training

Sylvain Cremoux, Dimitri Elie, Cecilie Rovsing, Helene Rovsing, Mads Jochumsen, Heidi Haavik, Imran K. Niazi

This study aimed to evaluate the corticomuscular changes associated with motor training. We quantified functional and corticomuscular changes during a four-days motor training. Results revealed better functional performance and increased magnitude of corticomuscular coherence in the 8–13 Hz...

4th International Conference on NeuroRehabilitation, Oct 2018, Pisa, Italy. ⟨10.1007/978-3-030-01845-0_151⟩. ⟨hal-03462927⟩