Publicaciones

• Communication dans un congrès

Analyse biomécanique du mode de propulsion synchrone versus asynchrone chez des basketteurs en fauteuil roulant lors de tests de terrain

Marjolaine Astier, Thierry Weissland, Didier Pradon, Eric Watelain, Jean-Marc Vallier, Arnaud Faupin

16ème congrès international de l’ACAPS, Oct 2015, Nantes, France. ⟨hal-03460621⟩

• Communication dans un congrès

Influence of Weight Status on Hip Geometry in Lebanese Elderly Women

Riad Nasr, Eric Watelain, Antonio Pinti, Ghassan Maalouf, Eddy Zakhem, Rawad El Hage

16ème congrès international de l’ACAPS, Oct 2015, Nantes, France. ⟨hal-03460645⟩

• Communication dans un congrès

Une conception anthropo-centrée pour casser le mythe de l’«Humain Magique» en Génie Industriel ?

Patrick Millot, Marie-Pierre Pacaux-Lemoine, Damien Trentesaux

Dans les systèmes industriels « intelligents » notamment bâtis autour d’architectures distribuées, holoniques et multi-agents, la démarche de conception ne prend pas prioritairement en compte l’opérateur humain. Cette démarche, souvent pratiquée dans le cadre plus global du génie industriel, est..., Even in the more recent intelligent industrial systems equipped with distributed, holonic and multi-agent architectures, design approaches do not take the human operators as a matter of priority to face unforeseen or delicate situations. This approach currently used in industrial engineering and...

11e CONGRES INTERNATIONAL DE GENIE INDUSTRIEL – CIGI2015, Oct 2015, Quebec, Canada. ⟨hal-03413155⟩

• Communication dans un congrès

Le déficit bilatéral de force en flexion plantaire : fiction ou réalité ?

Emilie Simoneau-Buessinger, Sebastien Leteneur, Anis Toumi, Alexandra Dessurne, François Gabrielli, Franck Barbier, Jennifer Jakobi

XVIe Congrès de l’Association des Chercheurs en Activités Physiques et Sportives (ACAPS), Oct 2015, Nantes, France. ⟨hal-03413134⟩

• Communication dans un congrès

Difficultés d’implémentation du Lean Manufacturing dans les Petites et Moyennes Entreprises

Alexandre Moeuf, Simon Tamayo, Samir Lamouri, Robert Pellerin, Adrien Lelievre

Cet article explore les difficultés d’implémentation du Lean manufacturing dans les petites et moyennes entreprises En effet, à partir d’une analyse de la littérature scientifique, nous constatons un ensemble de conflit entre les caractéristiques identifiées des PME et les principes managériaux du..., This article explores the difficulties to implement Lean manufacturing practices in small and medium enterprises (SMEs). From the analysis of scientist papers, a set of difficulties appears between the SMEs characteristics and the Lean manufacturing management principles. Among the most important...

11e Congrès International de Génie Industriel – CIGI2015, Oct 2015, Quebec, Canada. ⟨hal-03419647⟩

• Communication dans un congrès

Virtualisation des PI-conteneurs et premières applications dans un contexte d’Internet Physique

Patrick Charpentier, Nicolas Krommenacker, Yves Sallez

Dans le cadre de l’Internet Physique, les objets manipulés sont des conteneurs modulaires standardisés. Ces conteneurs peuvent être porteurs d’un certain nombre de données ou d’informations nécessaires lors des différentes opérations liées à leur transport et manutentions. Différentes technologies...

11ème Congrès International de Génie Industriel, CIGI'2015, Oct 2015, Québec, Canada. ⟨hal-01243713⟩

• Communication dans un congrès

Resilience-based performance assessment of strain situations in emergency departments

Farid Kadri, Sondès Chaabane, Abdelghani Bekrar, Christian Tahon

In response to events and exceptional situations (e.g. health threats related to epidemics, seasonal flux, heat waves, and cold waves), hospital establishments in particular emergency departments, must be able to receive patients for medical and surgical treatments whatever the extent of the...

2015 International Conference on Industrial Engineering and Systems Management (IESM), Oct 2015, Seville, Spain. pp.609-618, ⟨10.1109/IESM.2015.7380221⟩. ⟨hal-03413905⟩

• Communication dans un congrès

A joint optimization-simulation model to minimize the makespan on a repairable machine

Abdessamad Ait El Cadi, Rachid Benmansour, Faiza Serraj, Abdelhakim Artiba

We consider the problem of scheduling a set of jobs on a single machine subject to stochastic failures. The objective is to minimizing the makespan. The machine could be stopped for preventive maintenance occasionally to reduce the risk of failure and to improve its reliability. Furthermore, in the...

2015 International Conference on Industrial Engineering and Systems Management (IESM), Oct 2015, Seville, Spain. pp.489-495, ⟨10.1109/IESM.2015.7380203⟩. ⟨hal-03668917⟩

• Communication dans un congrès

A preliminary study on integrating operation flexibility within semi-heterarchical FMS control

Nawal Ghazi, Gabriel Zambrano Rey, Abdelghani Bekrar, Damien Trentesaux, Mohamed Tadjine

This study aims to analyze the integration of operation flexibility (OF) within a semi-heterarchical flexible manufacturing system (SHFMS) control architecture. This architecture is composed of two types of decisional entities, global and local, and it exists three different modes in which those...

2015 International Conference on Industrial Engineering and Systems Management (IESM), Oct 2015, Seville, Spain. pp.1310-1317, ⟨10.1109/IESM.2015.7380321⟩. ⟨hal-03413813⟩

• Communication dans un congrès

Iterative relaxation-based heuristic for the single-processor scheduling problem with time restrictions.

Christophe Wilbaut, Rachid Benmansour, Said Hanafi, Oliver Braun

Recently, the single-processor scheduling problem with time restrictions was investigated by several researchers, and worst-case analysis and exact methods to solve this problem were provided. The studied problem has been formulated in 2013 as follows. A set of simultaneously available and...

2015 International Conference on Industrial Engineering and Systems Management (IESM), Oct 2015, Seville, Spain. pp.496-501, ⟨10.1109/IESM.2015.7380204⟩. ⟨hal-03385011⟩