Publicaciones

• ART

A review of characterisation and parameters identification of materials constitutive and damage models: From normalised direct approach to most advanced inverse problem resolution

Eric Markiewicz, Bertrand Langrand, Delphine Notta-Cuvier

The paper aims at providing an overview of the research activities performed in the two past decades in the field of materials characterisation under dynamic loadings (i.e. from to for structural crashworthiness and impact applications) and identification of parameters of constitutive behaviour and...

International Journal of Impact Engineering, 2017, 110, pp. 371-381. ⟨10.1016/j.ijimpeng.2017.01.028⟩. ⟨hal-01659636⟩

• ART

Experimental assessment of the sudden-reversal of the oxygen dilution effect on soot production in coflow ethylene flames

Qianlong Wang, Guillaume Legros, Jérôme Bonnety, Céline Morin, Alexis Matynia, Jean-Louis Consalvi, Fengshan Liu

This paper explores the influence of oxygen dilution on soot production when oxygen is added to the fuel stream of a steady laminar ethylene flame established over the Santoro axisymmetric coflow burner. Interestingly, at an oxygen mole fraction X_{ax}^{O_2,trans} located between 30% and 32%, a...

Combustion and Flame, 2017, 183, pp.242-252. ⟨10.1016/j.combustflame.2017.05.001⟩. ⟨hal-01557989⟩

• REPORT

The Patches of the Nopol Automatic Repair System on the Bugs of Defects4J version 1.1.0

Thomas Durieux, Benjamin Danglot, Zhongxing Yu, Matias Martinez, Simon Urli, Martin Monperrus

This report lists the test-suite adequate patches found by the Nopol automatic repair system on version 1.1.0 of the Defects4J benchmark of bugs.

[Research Report] hal-01480084, Université Lille 1 - Sciences et Technologies. 2017. ⟨hal-01480084⟩

• ART

ELECTRE I Based Relevance Decision-Makers Feedback to the Location Selection of Distribution Centers

Maroi Agrebi, Mourad Abed, Moahamed Nazih Omri

The location selection of distribution centers is one of the important strategies to optimize the logistics system. To solve this problem, under certain environment, this paper presents a new multicriteria decision-making method based on ELECTRE I. The proposed method helps decision-makers to...

Journal of Advanced Transportation, 2017, 51, pp.1-10. ⟨10.1155/2017/7131094⟩. ⟨hal-03401659⟩

• ART

Performance and environmental factors related to the main locomotor outcome in persons with an unilateral transtibial amputation equipped with energy storage and return feet, L'association entre les facteurs performance et environnement et le niveau de locomotion chez les personnes atteintes d'une amputation transtibiale unilatérale équipées d'un pied prothétique à stockage et restitution d'énergie

Yoshimasa Sagawa Jr, Ali Moustapha, Florence Beaucamp, André Thevenon, Eric Watelain

Objective. To assess performance and environmental factors in persons with an Unilateral TransTibial amputation (UTTA) equipped with an Energy Storage And Return (ESAR) foot. Method. Prosthetic Profile of the Amputees (PPA) questionnaire was sent to 295 adults with an UTTA. Results. Seventy-eight..., Objectif. Évaluer les facteurs performance et environnement chez les Personnes atteintes d'une Amputation Transtibial Unilatérale (PATU) équipées d'un Pied prothétique à Stockage/Restitution d'Énergie (PSRE). Méthode. Le questionnaire Profil Prothétique de l'Amputé (PPA) a été...

Movement & Sport Sciences - Science & Motricité, 2017, 98, pp.67-75. ⟨10.1051/sm/2017023⟩. ⟨hal-03028107⟩

• ART

Macro-modeling of spot weld strength and failure: Formulation and identification procedure based on pure and mixed modes of loading, Modélisation à l'échelle macroscopique de la tenue et de la rupture des points soudés : formulation et procédure d'identification fondée sur des changements en mode purs et mixtes

Rim Chtourou, Nicolas Leconte, Bassem Zouari, Fahmi Chaari, Eric Markiewicz, Bertrand Langrand

Purpose This paper aims to propose a macro modeling approach to simulate the mechanical behavior and the failure of spot welded joints in structural crashworthiness computations. Design/methodology/approach A connector element is proposed to simulate the behavior and failure of spot weld joints. An...

Engineering Computations, 2017, 34 (3), pp.941-959. ⟨10.1108/EC-03-2016-0081⟩. ⟨hal-01580320⟩

• COUV

Caregivers Routing Problem in Home Health Care: Literature Review

Eric Marcon, Sondès Chaabane, Yves Sallez, Thérèse Bonte

In France, Hospital-at-Home Services (HHS) providers that employ their caregivers have to define the assignment of patients to caregivers and the planning of the caregivers’ routes. In the literature, different approaches are proposed to deal with both these problems. Our aim in this paper is to...

Borangiu T., Trentesaux D., Thomas A., Leitão P., Oliveira J. Service Orientation in Holonic and Multi-Agent Manufacturing. , 694, Springer, pp. 319-326, 2017, Studies in Computational Intelligence, ⟨10.1007/978-3-319-51100-9_28⟩. ⟨hal-01518634⟩

• ART

Wear pattern on a retrieved Total Knee Replacement: The “fourth body abrasion”

Charles Garabédian, Maxence Bigerelle, Denis Najjar, Henri Migaud

Released debris in a replaced knee, such as bone loose, bone cement debris and metallic particles, are responsible for a third body abrasion of the Polyethylene (PE) mobile bearing superior surface and therefore compromise the Total Knee Replacement (TKR) implant longevity. To analyze the upstream...

Biotribology, 2017, 11, pp.29 - 43. ⟨10.1016/j.biotri.2017.05.003⟩. ⟨hal-01714618⟩

• COMM

Multi-Physic Analysis of Electrical Machines: Hybrid Electro-Magneto-Aero-ThermalModeling

Oualid Messal, Louis Lambourg, Frédéric Dubas, Souad Harmand, Afef Kedous-Lebouc, Christian Chillet

ICEMS 2017 : 19th International Conference on Electrical Machines and Systems, 2017, San Francisco, United States. ⟨hal-02330493⟩

• REPORT

Caractérisation de l’éco-conduite pour la conduite de tramways

Salvatore La Delfa, Rudy Dahyot, Simon Enjalbert, Philippe Polet, Sébastien Lefebvre, Denis Miglianico, Frédéric Vanderhaegen, Richard Kaczmarek

[Rapport de recherche] Université de valenciennes et du Hainaut-Cambrésis. 2017. ⟨hal-03423304⟩