Publicaciones

• ART

Mock-up Study of the Effect of Wall distance on the Thermal Rating of Power Cables in Ventilated Tunnels

Fahd Boukrouche, Christophe Moreau, Julien Pellé, François Beaubert, Souad Harmand, Olivier Moreau

Power transmission through power cables installed in ventilated tunnels is increasingly used worldwide and offers a complex thermal environment. Established correlations currently in use have been deduced from a nonfully developed turbulent flow and the effect of the proximity to a tunnel wall is...

IEEE Transactions on Power Delivery, 2017, 32 (6), pp.2453 - 2461. ⟨10.1109/TPWRD.2016.2629285⟩. ⟨hal-03461856⟩

• ART

Effect of Operating Parameters on the Heat Transfer and Liquid Film Thickness of Revolving Heat Pipe

Hamdy Hassan, Souad Harmand

This paper presents a study on the effects of operating parameters on the liquid film thickness and heat transfer of revolving heat pipe. The effects of speed, radius of rotation, evaporator and condenser temperatures, and mass of the working fluid are considered. Also, the effects of these...

Heat Transfer Engineering, 2017, 38 (5), pp.538-548. ⟨10.1080/01457632.2016.1195175⟩. ⟨hal-03461759⟩

• ART

Experimental study of the cooling performance of phase change material with discrete heat sources – Continuous and intermittent regimes

Salma Gharbi, Souad Harmand, Sadok Ben Jabrallah

This paper presents an experimental investigation of phase change material (PCM, Plastic paraffin) behavior in a rectangular enclosure with three discrete heat sources flush-mounted on the right vertical wall. The remaining walls of the cavity are adiabatic. Maximizing the critical time (time...

Applied Thermal Engineering, 2017, 111, pp.103-111. ⟨10.1016/j.applthermaleng.2016.06.109⟩. ⟨hal-03456388⟩

• ART

Reorganization of motor cortex and impairment of motor performance induced by hindlimb unloading are partially reversed by cortical IGF-1 administration

Julien Mysoet, Marie-Hélène Canu, Christophe Gillet, Julie Fourneau, Cyril Garnier, Bruno Bastide, Erwan Dupont

Immobilization, bed rest, or sedentary lifestyle, are known to induce a profound impairment in sensorimotor performance. These alterations are due to a combination of peripheral and central factors. Previous data conducted on a rat model of disuse (hindlimb unloading, HU) have shown a profound...

Behavioural Brain Research, 2017, 317, pp.434-443. ⟨10.1016/j.bbr.2016.10.005⟩. ⟨hal-03466586⟩

• PROCEEDINGS

Proceedings of IHM'17

Patrick Girard, Thierry Duval, Martin Hachet, Christophe Kolski

29ème Conférence de l'Association Francophone d'Interaction Homme-Machine, Aug 2017, Poitiers, France. 2017. ⟨hal-03349322⟩

• ART

Thermal effect of the welding process on the dynamic behavior of the HSS constitutive materials of a fillet welded joint

Julien Carrier, Eric Markiewicz, Grégory Haugou, David Lebaillif, Nicolas Leconte, Hakim Naceur

Welded joints, due to their manufacturing process, are commonly weakened areas. This study provides a pragmatic methodology to analyze the dynamic behavior of the Base Metal (BM) and the Heat-Affected Zone (HAZ) of an HSS (High Strength Steel) fillet welded joint. Firstly, a specific approach has...

Mechanics & Industry, 2017, 18 (3), ⟨10.1051/meca/2016045⟩. ⟨hal-03456436⟩

• ART

Experimental Spectroscopic Studies of Carbon Monoxide (CO) Fluorescence at High Temperatures and Pressures, Etudes experimentales de spectroscopie de fluorescence du monoxyde de carbone (CO) à hautes températures et pressions

Olivier Carrivain, Mikael Orain, Nelly Dorval, Céline Morin, Guillaume Legros

Two-photon excitation laser-induced fluorescence of carbon monoxide (CO-LIF) is investigated experimentally in order to determine the applicability of this technique for imaging CO concentration in aeronautical combustors. Experiments are carried out in a high temperature, high-pressure test cell,..., Une étude expérimentale de spectroscopie LIF à deux photons de la molécule CO (CO-LIF) est menée afin d'évaluer sa faisabilité en mode imagerie dans des moteurs aéronautiques. Les expériences sont réalisées d'une part dans une cellule à hautes température et pression et dans une flamme de...

Applied Spectroscopy, 2017, 71 (10), page 2353 - 2366. ⟨10.1177/0003702817709439⟩. ⟨hal-01699149⟩

• COMM

Caractérisation des écoulements de cavité asymétriques

Denis Cornu, Laurent Keirsbulck, Camila Chovet, Marc Lippert, Franck Kerhervé, Fethi Aloui

La définition d'une cavité est simple. Il s'agit d'un espace creux, naturel ou artificiel, plus ou moins large et plus ou moins profond, fermé ou non. Il existe de nombreuses formes de cavités (rectangulaires, cylindriques) qui sont plus ou moins profondes. D'une manière plus...

CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France. ⟨hal-03465277⟩

• ART

A view of trust and information system security under the perspective of critical infrastructure protection, Une vision de la recherche sur la confiance et la sûreté des systèmes d’information dans le cadre de la protection des infrastructures critiques

Bako Rajaonah

Although trust is recognized as important in security issues of computer networking environments, few studies on information systems deal with both trust and security, and those existing tend to remain within the short perimeter of two-agent interactions. We propose to rethink trust research on..., Bien que la confiance soit reconnue comme importante dans les environnements numériques, peu d'études sur les systèmes d'information traitent à la fois de leur sûreté et de la confiance. Celles qui existent tendent à rester dans le périmètre étroit des interactions entre deux agents. Nous...

Revue des Sciences et Technologies de l'Information - Série ISI : Ingénierie des Systèmes d'Information, 2017, 22 (1), pp.109. ⟨10.3166/isi.22.1.109-133⟩. ⟨hal-01540678⟩

• COMM

Stratégie numérique et expérimentale pour la maîtrise de l'Usinage à Grande Vitesse

Michel Watremez, Yannick Senecaut, Laurent Dubar, Kevin Le Mercier

L'usinage à grande vitesse présente de nombreux avantages par rapport à l'usinage conventionnel, mais reste soumis aux contraintes économiques et écologiques. L'optimisation des paramètres de coupe doit permettre d'accroître la productivité, de réduire l'usure des outils et...

CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France. ⟨hal-03465300⟩