Publicaciones

• Article dans une revue

Multiscale finite element modelling of ductile damage behaviour of the human femur under dynamic loading

Hakim Naceur, Jamila Rahmoun, Julien Halgrin, Patrick Chabrand

In this paper, we propose a new multiscale finite element methodology based on a recently developed micromechanical damage model for the modelling of the human bone behaviour under dynamic loading. The damage is carried out by the framework of the limit analysis based on the MCK (Monchiet,...

International Journal of Damage Mechanics, 2015, 24 (3), pp.418-445. ⟨10.1177/1056789514537919⟩. ⟨hal-01443845⟩

• Article dans une revue

Study of fatigue failure in Al-chip-metallization during power cycling

Camille Durand, Markus Klingler, Daniel Coutellier, Hakim Naceur

This paper studies the failure mechanisms occurring in the chip-metallization of a new power module using a copper clip soldered on the top side of the chip, instead of aluminum wire bonds. Both power cycling tests and thermo-mechanical Finite Elements simulations are performed. Simulations of...

Engineering Fracture Mechanics, 2015, 138, pp.127-145. ⟨10.1016/j.engfracmech.2015.02.020⟩. ⟨hal-03450932⟩

• Article dans une revue

Anti-windup based dynamic output feedback controller design with performance consideration for constrained Takagi–Sugeno systems

Tran Anh-Tu Nguyen, Antoine Dequidt, Michel Dambrine

This paper proposes an LMI-based method to guarantee the closed-loop regional stability and performance for Takagi-Sugeno systems that are subject to input saturation, state constraints and also amplitude-bounded disturbance. Based on Lyapunov stability tool, the proposed method provides conditions...

Engineering Applications of Artificial Intelligence, 2015, 40, pp.76-83. ⟨10.1016/j.engappai.2015.01.005⟩. ⟨hal-03428691⟩

• Article dans une revue

Effect of Substrate Temperature on Pattern Formation of Nanoparticles from Volatile Drops

Maryam Maria Parsa, Souad Harmand, Khellil Sefiane, Maxence Bigerelle, Raphaël Deltombe

This study investigates pattern formation during evaporation of water-based nanofluid sessile droplets placed on a smooth silicon surface at various temperatures. An infrared thermography technique was employed to observe the temperature distribution along the air–liquid interface of evaporating...

Langmuir, 2015, 31 (11), pp.3354-3367. ⟨10.1021/acs.langmuir.5b00362⟩. ⟨hal-03448690⟩

• Article dans une revue

Effect of Substrate Temperature on Pattern Formation of Nanoparticles from Volatile Drops

Maryam Parsa, Souad Harmand, Khellil Sefiane, Maxence Bigerelle, Raphaël Deltombe

Langmuir, 2015, 31, pp.3354 - 3367. ⟨10.1021/acs.langmuir.5b00362⟩. ⟨hal-04528439⟩

• Article dans une revue

Bottleneck-based opportunistic maintenance model for series production systems

Binghai Zhou, Jiadi Yu, Jianyi Shao, Damien Trentesaux

Purpose – The purpose of this paper is to develop a bottleneck-based opportunistic maintenance (OM) model for the series production systems with the integration of the imperfect effect into maintenance activities. Design/methodology/approach – On the analysis of availability and maintenance cost,...

Journal of Quality in Maintenance Engineering, 2015, 21 (1), pp.70-88. ⟨10.1108/JQME-09-2013-0059⟩. ⟨hal-03430016⟩

• Article dans une revue

Investigations of the microstructural response to a cold forging process of the 6082-T6 alloy

Jérémie Bouquerel, Bandiougou Diawara, André Dubois, Mirentxu Dubar, Jean-Bernard Vogt, Denis Najjar

The microstructure of 6082 aluminium alloy in artificial aged condition was investigated before and after cold forming. The cold forming process was performed at room temperature with and without lubricant. An in depth microstructure investigation has been carried out through electron backscatter...

Materials & Design, 2015, 68, pp.245-258. ⟨10.1016/j.matdes.2014.12.005⟩. ⟨hal-01204798⟩

• Article dans une revue

Solving the minimum labelling spanning tree problem by intelligent optimization

Sergia Consoli, Nenad Mladenovic, José Andrés Moreno Pérez

Research on intelligent optimization is concerned with developing algorithms in which the optimization process is guided by an “intelligent agent”, whose role is to deal with algorithmic issues such as parameters tuning, adaptation, and combination of different existing optimization techniques,...

Applied Soft Computing, 2015, 28, pp.440-452. ⟨10.1016/j.asoc.2014.12.020⟩. ⟨hal-03401226⟩

• Article dans une revue

Fluid flow and convective heat transfer of combined swirling and straight impinging jet arrays

Manel Wannassi, François Monnoyer de Galland

Impinging swirling jets generate interesting flow fields. In this paper, the flow and heat transfer characteristics of a staggered combination of straight and swirling jets are reported in order to access flow details and to show complex flow structures as well as the strong coupling between the...

Applied Thermal Engineering, 2015, 78, pp.62-73. ⟨10.1016/j.applthermaleng.2014.12.043⟩. ⟨hal-03450787⟩

• Article dans une revue

Analysis of the unsteady behavior of an electrical heater using the lock-in technique: Comparison of theory and experiments

Sylvain Lalot, Bernard Desmet

In the recent years, the lock-in technique has been tested in thermal engineering. Due to its high sensitivity for signal analysis, it has great potentialities for drift detection. Here the aim is more particularly fouling detection. The key point for this technique is the choice of the angular...

Applied Thermal Engineering, 2015, 79, pp.37-43. ⟨10.1016/j.applthermaleng.2015.01.024⟩. ⟨hal-03448683⟩