Publicaciones

• Article dans une revue

Special issue DSD 2012 on Reliability and dependability in MPSoC Technologies

Smail Niar, Cristina Silvano

Microprocessors and Microsystems: Embedded Hardware Design , 2013, 37 (8, PART A), pp.759. ⟨10.1016/j.micpro.2013.08.005⟩. ⟨hal-03624184⟩

• Article dans une revue

Parametric Study of the Effect of the Vapor Chamber Characteristics on Its Performance

Hamdy Hassan, Souad Harmand

In this work, the effect of vapor chamber characteristics, the properties of its working fluid and the operating parameters on the vapor chamber performance are studied. Also, the effects of these parameters on the cooling process are considered. A three dimensional hydrodynamic model is used for...

Journal of Heat Transfer, 2013, 135 (11), pp.111008. ⟨10.1115/1.4024613⟩. ⟨hal-03615914⟩

• Article dans une revue

Friction analysis at the glass/tool interface and the lubrication influence during hot forming cycles

Philippe Moreau, Damien Montoya, Dominique Lochegnies, Hugues Vivier

In the hollow glass industry, specifically in the luxury perfume glass bottle industry, the success of the forming process depends on preventing the sticking at the glass/mold interface to make it easier to release the mold and prevent defects on the glass surface. This study concerns a new way to...

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2013, 227 (11), pp.1253-1260. ⟨10.1177/1350650113488309⟩. ⟨hal-03621581⟩

• Article dans une revue

Effects of synchronous versus asynchronous mode of propulsion on wheelchair basketball sprinting.

Arnaud Faupin, Benoît Borel, Christophe Meyer, Philippe Gorce, Eric Watelain

This study aimed to first investigate synchronous (SYN) versus asynchronous (ASY) mode of propulsion and, second, investigate the wheel camber effects on sprinting performance as well as temporal parameters. Seven wheelchair basketball players performed four maximal eight-second sprints on a...

Disability and Rehabilitation: Assistive Technology, 2013, 8 (6), pp.496-501. ⟨10.3109/17483107.2012.756947⟩. ⟨hal-01145760⟩

• Article dans une revue

Turbulent impinging jet flow into an unshrouded rotor-stator system: Hydrodynamics and heat transfer

Sébastien Poncet, Thien Duy Nguyen, Souad Harmand, Julien Pellé, Riccardo da Soghe, Cosimo Bianchini, Stéphane Viazzo

New calculations using an innovative Reynolds Stress Model are compared to velocity measurements performed by Particle Image Velocimetry technique and the predictions of a k-w SST model in the case of an impinging jet flow onto a rotating disk in a discoidal and unshrouded rotor-stator system. The...

International Journal of Heat and Fluid Flow, 2013, 44, pp.719-734. ⟨10.1016/j.ijheatfluidflow.2013.10.001⟩. ⟨hal-00976669⟩

• Article dans une revue

A fast multicriteria decision-making tool for industrial scheduling problems

David Duvivier, Nadine Meskens, Mario Ahues

In today's challenging industrial contexts, decision makers need versatile tools to quickly acquire, synthesize, simulate and optimize several solutions that can be compared from multiple points of view and according to various performance criteria. In the context of limited-time multicriteria...

International Journal of Production Economics, 2013, 145 (2), pp.753-760. ⟨10.1016/j.ijpe.2013.05.028⟩. ⟨hal-00880935⟩

• Article dans une revue

Motor-related cortical activity after cervical spinal cord injury: Multifaceted EEG analysis of isometric elbow flexion contractions

Sylvain Cremoux, Jessica Tallet, Eric Berton, Fabien Dal Maso, David Amarantini

Electroencephalographic (EEG) studies have well established that motor cortex (M1) activity similar to 20 Hz decreases during muscular contraction and increases as soon as contraction stops, which are known as event-related desynchronization (ERD) and event-related synchronization (ERS),...

Brain Research, 2013, 1533, pp.44-51. ⟨10.1016/j.brainres.2013.08.008⟩. ⟨hal-01454755⟩

• Article dans une revue

Experimental study of two-phase flow pattern evolution in a horizontal circular tube of small diameter in laminar flow conditions

S. Zeguai, Soufien Chikh, L. Tadrist

The carried out experimental study aims at analyzing air-water two-phase flow patterns in a horizontal tube for laminar flow with carefully controlled conditions. An experimental test rig has been setup to produce a two-phase flow in a glass tube of 3 mm inner diameter with co-current air and water...

International Journal of Multiphase Flow, 2013, 55, pp.99-110. ⟨10.1016/j.ijmultiphaseflow.2013.04.008⟩. ⟨hal-01459472⟩

• Article dans une revue

Wall shear stress characterization of a 3D bluff-body separated flow

Grégoire Fourrié, Laurent Keirsbulck, Larbi Labraga

Efficient flow control strategies aimed at reducing the aerodynamic drag of road vehicles require a detailed knowledge of the reference flow. In this work, the flow around the rear slanted window of a generic car model was experimentally studied through wall shear stress measurements using an...

Journal of Fluids and Structures, 2013, 42, pp.55-69. ⟨10.1016/j.jfluidstructs.2013.05.014⟩. ⟨hal-03615070⟩

• Article dans une revue

Assessment of ship manoeuvrability by using a coupling between a nonlinear transient manoeuvring model and mathematical programming techniques

Toan Tran Khanh, Abdellatif Ouahsine, Hakim Naceur, Karima El Wassifi

In this paper, a numerical method based on a coupling between a mathematical model of nonlinear transient ship manoeuvring motion in the horizontal plane and Mathematical Programming (MP) techniques is proposed. The aim of the proposed procedure is an efficient estimation of optimal ship...

Journal of Hydrodynamics, 2013, 25 (5), pp.788-804. ⟨10.1016/S1001-6058(13)60426-6⟩. ⟨hal-03625169⟩