Publicaciones

• Article dans une revue

Evaluation of the PANS method for the prediction of the fluid flow in a cyclone separator

Zaher Bitar, David Uystepruyst, François Beaubert, Damien Méresse, Céline Morin

The simulation of the cyclone separation efficiency can rapidly become very expensive in time of calculation, which is not suitable for industrial application. The prediction of the complex turbulent gas flow inside a cyclone is necessary to estimate its pressure drop, its characteristics and...

Comptes Rendus. Mécanique, 2023, 351 (G2), pp.201-218. ⟨10.5802/crmeca.186⟩. ⟨hal-04278484⟩

• Article dans une revue

A Novel 3D Topography Stitching Algorithm Based on Reflectance and Multimap

Julie Lemesle, Robin Guibert, Maxence Bigerelle

Surface topography is an efficient tool for the understanding of physical phenomena, especially if multiscale roughness analysis is performed. However, the observable scale range in a topography measured with 3D optical profilometers is quite limited. Therefore, all scales linked to a physical...

Applied Sciences, 2023, 13 (2), pp.857. ⟨10.3390/app13020857⟩. ⟨hal-04122323⟩

• Article dans une revue

A Survey on Fuzzy Control for Mechatronics Applications

Radu-Emil Precup, Tran Anh-Tu Nguyen, Sašo Blažič

Fuzzy control has become one of the most effective tools for dealing with complex engineering processes. Over the years, research on fuzzy control systems has continuously evolved, witnessing numerous theoretical contributions and successful real-world achievements. The concept of model-free or...

International Journal of Systems Science, 2023, 55 (4), pp.771-813. ⟨10.1080/00207721.2023.2293486⟩. ⟨hal-04501760⟩

• Article dans une revue

Validation of walking events detecting algorithm during Nordic walking of healthy subjects

M Blandeau, R Lesaffre, L Wallard

Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, 2023, ⟨10.1080/10255842.2023.2246304⟩. ⟨hal-04287248⟩

• Article dans une revue

Highly stable fluorine-free slippery liquid infused surfaces

Anne-Sophie Vaillard, Manon Saget, Flavie Braud, Marc Lippert, Laurent Keirsbulck, Maude Jimenez, Yannick Coffinier, Vincent Thomy

A promising Slippery Liquid Infused Surface (SLIS) has been developed, that is both easy-to-produce and environmentally friendly. Using a double replication method, a 200 µm-thick texturized cross-linked PDMS film was obtained, leading to a grid of micrometric hills and deep wells. A comparison...

Surfaces and Interfaces, 2023, 42, Part A, pp.103296. ⟨10.1016/j.surfin.2023.103296⟩. ⟨hal-04215387⟩

• Article dans une revue

A multi-agent system simulation based approach for collision avoidance in integrated Job-Shop Scheduling Problem with transportation tasks

Kader Sanogo, Abdelkader Mekhalef Benhafssa, M’hammed Sahnoun, Belgacem Bettayeb, Moussa Abderrahim, Abdelghani Bekrar

At the operational level of Flexible Manufacturing Systems (FMS), several research works have developed solutions not fully realizable considering the operational constraints, which can be difficult to model. One of the well-known problems in FMS is the Job-Shop Scheduling Problem (JSSP) with...

Journal of Manufacturing Systems, 2023, 68, pp.209-226. ⟨10.1016/j.jmsy.2023.03.011⟩. ⟨hal-04055057⟩

• Article dans une revue

Improved high-order integral fast terminal sliding mode-based disturbance-observer for the tracking problem of PMSG in WECS

Chakib Chatri, Moussa Labbadi, Mohammed Ouassaid

The present paper proposes a high-order sliding mode control approach for wind turbine (WT) with a permanent magnet synchronous generator (PMSG) under complex situations. The suggested control approach uses a disturbance observer (DO) with a modified super-twisting integral fast terminal sliding...

International Journal of Electrical Power & Energy Systems, 2023, 144, pp.108514. ⟨10.1016/j.ijepes.2022.108514⟩. ⟨hal-03809811⟩

• Article dans une revue

Design features of the kinematic chain of the ant exoskeleton

Santiago Arroyave-Tobon, Jordin Drapin, Jean-Marc Linares, Pierre Moretto

New challenges in engineering design are about resilience, frugality and sustainability. Nature offers remarkable examples of successful mechanical designs that respond to those constraints. Therefore, biological systems deserve to be explored from a design perspective. The study of design features...

Procedia CIRP, 2023, 119, pp.855-860. ⟨10.1016/j.procir.2023.01.019⟩. ⟨hal-04551171⟩

• Article dans une revue

Martens hardness of Constantan thin films on (100) Si wafer: Improvement in contact area function in nanoindentation

Ayyoub Dziri, Alex Montagne, Francine Roudet, Katir Ziouche, Didier Chicot

This work presents a mechanical study by nanoindentation of Constantan thin films deposited by cathodic sputtering technique with an intermediate thin adhesion layer of titanium on a (100) silicon wafer substrate. A methodology based on a modified contact area function is proposed for a suitable...

Thin Solid Films, 2023, pp.139712. ⟨10.1016/j.tsf.2023.139712⟩. ⟨hal-03951065⟩

• Article dans une revue

Vehicle Actuator Fault Detection With Finite-Frequency Specifications via Takagi-Sugeno Fuzzy Observers: Theory and Experiments

Juntao Pan, Tran Anh-Tu Nguyen, Thierry-Marie Guerra, Chouki Sentouh, Sujun Wang, Jean-Christophe Popieul

Abstract This article investigates the design of Takagi–Sugeno (TS) fuzzy model‐based observers for nonlinear systems with parametric uncertainties and unknown inputs. To address this challenging problem, two observers are constructed in cascade. Based on the sliding mode technique, the first...

IEEE Transactions on Vehicular Technology, 2023, 72 (1), pp.407-417. ⟨10.1109/TVT.2022.3204326⟩. ⟨hal-04278835⟩