Publicaciones

Tipo de Documento

Palabras clave

Autor

De

Au

Affichage de 251 à 260 sur 2006

Article dans une revue

Toward a Reliable Estimation of Fluid Concentration using High Frequency Acoustic Waves: A Machine Learning Approach

Venu Babu Thati, Ibrahim Zaaroura, Malika Toubal, Nikolay Smagin, Souad Harmand, Julien Carlier, Ihsen Alouani

Using acoustic waves to estimate fluid concentration is a promising technology due to its practicality and non-intrusive aspect, especially for medical applications. The existing approaches are exclusively based on the correlation between the reflection coefficient and the concentration. However,...

IEEE Sensors Journal, 2022, 22, pp.8772 - 8780. ⟨10.1109/JSEN.2022.3161380⟩. ⟨hal-03621173⟩

Article dans une revue

Robustness of specimen design criteria for identification of anisotropic mechanical behaviour from heterogeneous mechanical fields, Robustesse des critères de conception des éprouvettes pour l'identification de comportements anisotropes à partir de champs mécaniques hétérogènes

Jean-David Thoby, Thomas Fourest, Bertrand Langrand, Delphine Notta-Cuvier, Eric Markiewicz

To reduce the number of tests required to characterise anisotropic elastoplastic constitutive models, an approach is to design specimen geometries to diversify the stress states generated in a single test. The experiments are then processed using an inverse identification method based on full-field..., Pour réduire le nombre d'essais nécessaires à la caractérisation des modèles élasto-plastiques anisotropes, une approche consiste à concevoir des géométries d'éprouvettes permettant de diversifier les états de contrainte générés dans un seul essai. Les essais sont ensuite traités à l...

Computational Materials Science, 2022, 207, pp.111260. ⟨10.1016/j.commatsci.2022.111260⟩. ⟨hal-03636642⟩

Article dans une revue

Integral-type terminal sliding mode control approach for wind energy conversion system with uncertainties

Chakib Chatri, Mohammed Ouassaid, Moussa Labbadi, Youssef Errami

This paper investigates a robust controller for the wind energy conversion system (WECS) based on permanent magnet synchronous generator (PMSG) with parametric uncertainties. A robust nonlinear controller is developed for PMSG wind turbine (PMSG-WT) using integral-type terminal sliding mode control...

Computers and Electrical Engineering, 2022, 99, pp.107775. ⟨10.1016/j.compeleceng.2022.107775⟩. ⟨hal-03809812⟩

Article dans une revue

Performances Modeling of Computer Vision-based CNN on Edge GPUs

Halima Bouzidi, Hamza Ouarnoughi, Smail Niar, Abdessamad Ait El Cadi

Convolutional Neural Networks (CNNs) are widely used in various fields nowadays, particularly for computer vision applications. Edge platforms have drawn tremendous attention from academia and industry due to their ability to improve execution time and preserve privacy. However, edge platforms...

ACM Transactions on Embedded Computing Systems (TECS), 2022, ⟨10.1145/3527169⟩. ⟨hal-03703108⟩

Article dans une revue

Introduction to the special section humans and industry 4.0

Marie-Pierre Pacaux-Lemoine, Mohamed Sallak, Roberto Sacile, Frank Flemisch, Paulo Leitão

Since the start of industrialization, machine capabilities have increased in such a way that human control of processes has evolved from simple (with mechanization) to cognitive (with computerization), and even emotional (with semi/full automation). The processes have also evolved from simple to...

Cognition, Technology and Work, 2022, 24 (1), pp.1-5. ⟨10.1007/S10111-022-00696-1⟩. ⟨hal-03607443⟩

Article dans une revue

Towards designing and operating Physical Internet cross-docks: problem specifications and research perspectives

Tarik Chargui, Anne-Laure Ladier, Abdelghani Bekrar, Shenle Pan, Damien Trentesaux

Cross-docking is a common logistics practice applied in transit platforms to synchronize inbound and outbound vehicles in order to avoid keeping in-between storage. The practice plays a critical role to accelerate transportation flows. In this paper, we focus on Physical Internet (PI or π) cross-...

Omega, 2022, 111, pp.102641. ⟨10.1016/j.omega.2022.102641⟩. ⟨hal-03624314⟩

Article dans une revue

Influence of photooxidation on ionic reversible interactions of ionic poly(ether urethane)/silica hybrids

J.-E. Potaufeux, G. Rapp, S. Barrau, G. Liu, C. Zhang, Emmanuel Giannelis, D. Notta-Cuvier, Franck Lauro, J.-M. Raquez, J. Odent, S. Therias

Although organic-inorganic hybrids that leverage the reversible nature of electrostatic interactions present in ionic systems with the reinforcement ability of nanoparticles in nanocomposites have the potential to revolutionize a wide spectrum of technologies, the prediction of their service...

Polymer Degradation and Stability, 2022, Polymer Degradation and Stability, 197, pp.109872. ⟨10.1016/j.polymdegradstab.2022.109872⟩. ⟨hal-03759845⟩

Article dans une revue

Efficient Hybrid Algorithm Solution for Optimal Reactive Power Flow Using the Sensitive Bus Approach

Zahir Sahli, Abdellatif Hamouda, Samir Sayah, Damien Trentesaux, Abdelghani Bekrar

This paper presents the design and application of an efficient hybrid algorithm for solving the Optimal Reactive Power Flow (ORPF) problem. The ORPF is formulated as a nonlinear constrained optimization problem where the active power losses must be minimized. The proposed approach is based on the...

Engineering technology and Applied science research , 2022, 12 (1), pp.8210-8216. ⟨10.48084/etasr.4680⟩. ⟨hal-03586802⟩

Article dans une revue

Fixed-time sliding mode control with mismatched disturbances

Emmanuel Moulay, Vincent Léchappé, Emmanuel Bernuau, Michael Defoort, Franck Plestan

The aim of this article is to develop new second-order fixed-time sliding mode controllers able to tackle mismatched disturbances. Contrary to what is done in the literature, the proposed sliding-mode control strategy does not use disturbance observers because the sliding surface possesses...

Automatica, 2022, 136, pp.110009. ⟨10.1016/j.automatica.2021.110009⟩. ⟨hal-03502587⟩

Article dans une revue

An experimental investigation into influences of build orientation and specimen thickness on quasi-static and dynamic mechanical responses of Selective Laser Melting 316L Stainless Steel

Hugo Carassus, Jean-Dominique Guerin, Hervé Morvan, Grégory Haugou, Tarik Sadat, Sandra Guerard, Eric Markiewicz

Additive Layer Manufacturing (ALM) processes like Selective Laser Melting (SLM) enable the conception of complex designs with a high precision and equal or enhanced mechanical properties compared to Conventionally Manufactured (CM) structures. Nevertheless, this process, which consists in melting...

Materials Science and Engineering: A, 2022, 835, pp.142683. ⟨10.1016/j.msea.2022.142683⟩. ⟨hal-03555600⟩