Publicaciones

Tipo de Documento

Palabras clave

Autor

De

Au

Affichage de 361 à 370 sur 2097

Article dans une revue

Two-Step Validation of a New Wireless Inertial Sensor System: Application in the Squat Motion

Mathias Blandeau, Romain Guichard, Rémy Hubaut, Sébastien Leteneur

The use of Inertial Measurement Units (IMUs) can provide embedded motion data to improve clinical application. The objective of this study was to validate a newly designed IMU system. The validation is provided through two main methods, a classical sensor validation achieved on a six-degrees-of...

Technologies , 2022, 10 (3), pp.72. ⟨10.3390/technologies10030072⟩. ⟨hal-03691946⟩

Article dans une revue

Experimental investigation of early strain heterogeneities and localizations in polycrystalline α -Fe during monotonic loading

Adrien Berger, Jean-Francois Witz, Ahmed El Bartali, Tarik Sadat, Nathalie Limodin, Mirentxu Dubar, Denis Najjar

A polycrystalline recrystallized α-Fe specimen was subjected to monotonic tension up to 2 % strain. Local strain was measured all over the width of the specimen thanks to in-situ optical-based Digital Image Correlation with adequate spatial and temporal resolution. With additional knowledge of...

International Journal of Plasticity, 2022, 153, pp.103253. ⟨10.1016/j.ijplas.2022.103253⟩. ⟨hal-03775644⟩

Article dans une revue

An exact approach to the integration of non-cyclical preventive maintenance scheduling and production planning for a series-parallel production system

Abdessamad Ait El Cadi, Nizar Elhachemi, Abdelhakim Artiba, Mohamed Anouar Jamali, Louis-Martin Rousseau

In this paper, we generalise a model for integrated noncyclical preventive maintenance scheduling and production planning from a single machine to a series-parallel production line. As for a single machine, we consider a set of products that must be produced in lots during a given time horizon. The...

International Journal of Operational Research, 2022, 44 (3), pp.401-414. ⟨10.1504/IJOR.2021.10028946⟩. ⟨hal-03400330⟩

Article dans une revue

Short-Term Load Forecasting Based on CNN and LSTM Deep Neural Networks

First Ali Agga, Second Ahmed Abbou, Yassine El Houm, Moussa Labbadi

In the coming years, the world will witness a global transition towards the adoption of photovoltaic technology for large-scale plants to produce electricity at a grid scale, and more householders will also be encouraged to produce their electricity. However, the reliance of the photovoltaic plants...

IFAC-PapersOnLine, 2022, 55 (12), pp.777-781. ⟨10.1016/j.ifacol.2022.07.407⟩. ⟨hal-03809816⟩

Article dans une revue

Validation of an Embedded Motion-Capture and EMG Setup for the Analysis of Musculoskeletal Disorder Risks during Manhole Cover Handling

Rémy Hubaut, Romain Guichard, Julia Greenfield, Mathias Blandeau

Musculoskeletal disorders in the workplace are a growing problem in Europe. The measurement of these disorders in a working environment presents multiple limitations concerning equipment and measurement reliability. The aim of this study was to evaluate the use of inertial measurement units against...

Sensors, 2022, 22 (2), pp.436. ⟨10.3390/s22020436⟩. ⟨hal-03691933⟩

Article dans une revue

A systematic mapping study on agent mining

Emmanuelle Grislin-Le Strugeon, Káthia Marçal de Oliveira, Marie Thilliez, Dorian Petit

Over the past two decades, many studies have been published in diverse fields of application combining agent abilities (knowledge processing, communication, learning, mobility, etc.) and data mining approaches (clustering, decision trees, ontologies, etc.). We performed a systematic mapping study...

Journal of Experimental and Theoretical Artificial Intelligence, 2022, 34 (2), pp.189-214. ⟨10.1080/0952813X.2020.1864784⟩. ⟨hal-03396289⟩

Article dans une revue

Electromechanical properties of sodium bismuth titanate thin films

Stephania Kossman, Arthur Hamieh, Freddy Ponchel, Denis Remiens, Maxence Bigerelle

Lead-free piezoelectric sodium bismuth titanate (BNT) films are promising candidates for actuators applications as an alternative to lead zirconate titanate films. We focused in this work on the growth and characteristics of BNT films deposited by sputtering on silicon substrates with LaNiO3...

Thin Solid Films, 2022, 759, pp.139459. ⟨10.1016/j.tsf.2022.139459⟩. ⟨hal-03791697⟩

Article dans une revue

Engineering ethical behaviors in autonomous industrial cyber-physical human systems

Damien Trentesaux, Stamatis Karnouskos

Abstract This paper addresses the engineering of the ethical behaviors of autonomous industrial cyber-physical human systems in the context of Industry 4.0. An ethical controller is proposed to be embedded into these autonomous systems, to enable their successful integration in the society and its...

Cognition, Technology and Work, 2022, ⟨10.1007/s10111-020-00657-6⟩. ⟨hal-03365702⟩

Article dans une revue

Online driver model parameter identification using the Lyapunov approach based shared control

Mohamed Radjeb Oudainia, Chouki Sentouh, Anh-Tu Nguyen, Jean-Christophe Popieul

The work described in this paper proposes a new conflict minimisation strategy in shared driving control for lane keeping systems (LKS) in intelligent vehicles. This strategy takes into account a dynamic driver model, where the driver’s parameters are identified online using the Lyapunov approach...., Le travail décrit dans cet article propose une nouvelle stratégie de minimisation des conflits dans le contrôle partagé de la conduite pour les systèmes de maintien de voie (LKS) dans les véhicules intelligents. Cette stratégie prend en compte un modèle de conducteur dynamique, où les paramètres du...

Frontiers in Control Engineering, 2022, 3, pp.1055915. ⟨10.3389/fcteg.2022.1055915⟩. ⟨hal-04261239⟩

Article dans une revue

Numerical prediction of the galling of aluminium alloys in cold strip drawing

Oussama Filali, André Dubois, Marcel Moghadam, Chris V Nielsen, Laurent Dubar

A methodology based on finite element computations is proposed to predict the galling onset of aluminium alloys in cold forming. The methodology assumes that galling starts as soon as a finite element in the area of contact has reached a critical damage. The damage is calculated using Xue's...

Journal of Manufacturing Processes, 2022, 73, pp.340-353. ⟨10.1016/j.jmapro.2021.11.008⟩. ⟨hal-03529685⟩