Publicaciones

• Article dans une revue

Turbulent Plane Impinging Jet-Physical Insight and Turbulence Modeling

Mahmoud Charmiyan, Ahmed-Reza Azimian, Laurent Keirsbulck, Ebrahim Shirani, Fethi Aloui

A 3D numerical simulation using large eddy simulation (LES) method is performed for a submerged turbulent water slot jet impinging normally on a flat plate with a nozzle-to-plate distance of 10 jet width and a Reynolds number of 16000 and the results are compared with the existing experimental data...

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.11-17. ⟨10.36884/jafm.9.SI1.25825⟩. ⟨hal-03448221⟩

• Chapitre d'ouvrage

Measurements of dynamic properties of ballistic yarns using innovative testing devices

Caroline Chevalier, Christophe Kerisit, Andreas Klavzar, François Boussu, Daniel Coutellier

This chapter highlights the influence of the dynamic characteristic of yarn on the ballistic performance of fabric submitted to impact. A brief review of existing research works done on the dynamic tensile test known as the Hopkinson bar, and more recently the Split Flying Bar, is presented. A new...

Advanced Fibrous Composite Materials for Ballistic Protection, Elsevier, pp.199-215, 2016, 978-178242461-1. ⟨10.1016/B978-1-78242-461-1.00007-8⟩. ⟨hal-03667392⟩

• Article dans une revue

A new reduced model of scavenging to optimize cylinder design

Stéphanie Cagin, Xavier Fischer, Eric Delacourt, Nachida Bourabaa, Céline Morin, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents the development of a new scavenging model to optimize cylinder design. The developed model explicitly integrates some of the cylinder’s design and environmental variables to describe flows during the scavenging process. Then, based on the reduced model, an optimization phase was...

SIMULATION: Transactions of The Society for Modeling and Simulation International, 2016, 92 (6), pp.507-520. ⟨10.1177/0037549716644516⟩. ⟨hal-01330975⟩

• Chapitre d'ouvrage

Arezzo: an emulator for the bench4star initiative

Thierry Berger, Dominique Deneux, Thérèse Bonte, Etienne Cocquebert, Damien Trentesaux

Fischer X., Daidie A., Eynard B., Paredes M. Research in Interactive Design, 4, Springer, pp. 530-536, 2016, 978-3-319-26119-5. ⟨hal-03406808⟩

• Rapport

Pistes d’amélioration d’un siège d’avion pour passager à mobilité réduite

François Gabrielli, Philippe Pudlo

[Rapport de recherche] LAMIH, Valenciennes. 2016. ⟨hal-03420631⟩

• Article dans une revue

Experimental Study of Flow Control on Bluff Body using Piezoelectric Actuators

Nabil Tounsi, Rafika Mestiri, Laurent Keirsbulck, Hamid Oualli, Samir Hanchi, Fethi Aloui

Active flow control is experimentally investigated on a car-type bluff body. The actuation is based on a synthetic jet actuator placed at the top of the Ahmed body rear window. In the present paper, a synthetic jet characterization is presented, the frequencies and the optimal amplitudes with...

Journal of Applied Fluid Mechanics, 2016, 9 (2), pp.827-838. ⟨10.18869/acadpub.jafm.68.225.24488⟩. ⟨hal-03448166⟩

• Communication dans un congrès

Modeling transistor level masking of soft errors in combinational circuits

Ihsen Alouani, Smail Niar, Yassin El Hillali, Atika Rivenq

Technology scaling in modern electronic circuits shrinks the transistor size and dramatically increases the sensitivity of semiconductor devices to radiations. Consequently, soft errors emerged as a serious reliability threat in both sequential and combinational circuits. To accurately estimate...

2015 IEEE East-West Design and Test Symposium, EWDTS 2015, Sep 2015, Batumi, United States. pp.7493140, ⟨10.1109/EWDTS.2015.7493140⟩. ⟨hal-03528693⟩

• Communication dans un congrès

A co-design space exploration tool for avionic high performance heterogeneous embedded architectures

Geoffroy Pertuisot, Nicolas Belanger, Yassin El Hillali, Smail Niar, Atika Rivenq

Avionics in the helicopter manufacturers' landscape faces new challenges. Whereas customers raise continuously their needs in terms of new functions and embedded systems performances, certification authorities maintain complex rules to fulfill for parallel computing. This constraining...

11th International Design and Test Symposium, IDT 2016, Dec 2016, Hammamet, Tunisia. pp.77-82, ⟨10.1109/IDT.2016.7843018⟩. ⟨hal-03528686⟩

• Communication dans un congrès

An Approach for the Selection of Evaluation Methods for Interactive Adaptive Systems Using Analytic Hierarchy Process

Amira Dhouib, Abdelwaheb Trabelsi, Christophe Kolski, Neji Mahmoud

The evaluation of interactive adaptive systems is the source of many difficulties for novice evaluators as well as for expert ones. Issues arise in the need to identify the appropriate evaluation methods to be used for a given evaluation context. This paper proposes an approach for the choice of...

10th International Conference on Research Challenges in Information Science, RCIS 2016, Institute of Electrical and Electronics Engineers(IEEE), May 2016, Grenoble, France. pp.411-420, ⟨10.1109/RCIS.2016.7549289⟩. ⟨hal-03350506⟩

• Communication dans un congrès

A Design Model for Tangible Interaction: Case Study in Waste Sorting

Clémentine Havrez, Sophie Lepreux, Yoann Lebrun, Sylvain Haudegond, Pierrette Ethuin, Christophe Kolski

In this paper, we propose a design model for applications with Tangible User Interfaces (TUI). This model aims to support designers in organizing the different elements and their relationships. We then implement the model through the design of a Serious Game for an RFID tabletop that uses tangible...

The 13th IFAC/IFIP/IFORS/IEA Symposium on Analysis, Design, and Evaluation of Human-Machine Systems, Aug 2016, Kyoto, Japan. pp.373-378, ⟨10.1016/j.ifacol.2016.10.594⟩. ⟨hal-03517822⟩