Publicaciones

Tipo de Documento

Palabras clave

Autor

De

Au

Affichage de 3611 à 3620 sur 5635

Communication dans un congrès

Croyances volatiles pour l'adaptation collective de véhicules autonomes : application à une cellule de production flexible

Emmanuel Adam

En se basant sur la notion de stigmergie, nous proposons la notion de croyance volatile. En fait un coefficient de dégradation est appliqué non pas à la valeur de la phéromone, mais à la confiance accordée à la croyance. Chaque agent dégrade ainsi les confiances accordées à ses croyances. Lorsqu’...

23es Journées Francophones sur les Systèmes Multi-Agents (JFSMA'15), Jun 2015, Rennes, France. pp.219-220. ⟨hal-01163023⟩

Article dans une revue

Design of a device to induce swirling flow in pipes: A rational approach

François Beaubert, Halldor Pálsson, Sylvain Lalot, Isabelle Choquet, Hadrien Bauduin

In this study, a rational approach is proposed to design a device for inducing swirling flow in heat exchanger pipes, for improved efficiency in the laminar regime. First, 2D computational fluid dynamics results lead to select, among four profiles, the blade profile with the most favorable lift to...

Comptes Rendus. Mécanique, 2015, 343 (1), pp.1-12. ⟨10.1016/j.crme.2014.09.004⟩. ⟨hal-03452026⟩

Communication dans un congrès

Governance mechanism in control architectures for flexible manufacturing systems

José-Fernando Jimenez Gordillo, Abdelghani Bekrar, Damien Trentesaux, Gabriel Zambrano Rey, Paulo Leitão

Manufacturing systems, and specifically Flexible Manufacturing Systems (FMS), face the challenge of accomplish global optimal performance and reactiveness at dynamic manufacturing environments. For this reason, manufacturing control systems must incorporate mechanisms that support dynamic custom-...

15th IFAC Symposium on Information Control Problems in Manufacturing, May 2015, Ottawa, Canada. pp.1093-1098, ⟨10.1016/j.ifacol.2015.06.229⟩. ⟨hal-03416426⟩

Article dans une revue

Axisymmetric modeling of the thermal cooling, including radiation, of a circular glass disk

Norbert Siedow, Dominique Lochegnies, Fabien Béchet, Philippe Moreau, Hiroshi Wakatsuki, Nobuhiro Inoue

Achieving correct tempering in thin glass is very important to prevent undesired stress and breakage. Computer simulation can elucidate and control the tempering process. For semitransparent materials like glass, heat transfer by thermal radiation is substantial; for thick glass, it may dominate...

International Journal of Heat and Mass Transfer, 2015, 89, pp.414-424. ⟨10.1016/j.ijheatmasstransfer.2015.04.091⟩. ⟨hal-03276352⟩

Article dans une revue

An innovative procedure for characterising a coupled elastoplastic damage model of behaviour using the Virtual Fields Method

Delphine Notta-Cuvier, Bertrand Langrand, Franck Lauro, Eric Markiewicz

The characterisation of material behaviour models can be challenging, especially when dealing with strongly non-linear constitutive laws. Classical procedures are restricted to the treatment of homogeneous mechanical fields. They can therefore not be applied after strain localisation and behaviour...

International Journal of Solids and Structures, 2015, 69-70, pp.415-427. ⟨10.1016/j.ijsolstr.2015.05.009⟩. ⟨hal-01232504⟩

Article dans une revue

Smoothed finite element method implemented in a resultant eight-node solid-shell element for geometrical linear analysis

Xavier J-G Elie-Dit-Cosaque, Augustin Gakwaya, Hakim Naceur

A smoothed finite element method formulation for the resultant eight-node solid-shell element is presented in this paper for geometrical linear analysis. The smoothing process is successfully performed on the element mid-surface to deal with the membrane and bending effects of the stiffness matrix...

Computational Mechanics, 2015, 55 (1), pp.105-126. ⟨10.1007/s00466-014-1085-2⟩. ⟨hal-01348306⟩

Article dans une revue

Effects of robotic gait rehabilitation on biomechanical parameters in the chronic hemiplegic patients, Effets de la rééducation robotisée à la marche sur les paramètres biomécaniques de la marche chez des patients hémiplégiques chroniques

Laura Wallard, Gilles Dietrich, Yves Kerlirzin, Jonathan Bredin

Hemiplegia is a more or less complete loss of hemibody voluntary motricity following a brain injury, usually resulting in alterations of the locomotor system with persistent disorders of movement and posture. We were interested in studying the gait pattern called "stiff knee gait" with..., L’hémiplégie est une perte plus ou moins complète de la motricité volontaire d’un hémicorps suite à une lésion cérébrale, entraînant généralement des altérations de l’appareil locomoteur avec des troubles persistants du mouvement et de la posture. Nous nous sommes intéressés, pour cette étude, au...

Neurophysiologie Clinique = Clinical Neurophysiology, 2015, 45 (3), pp.215-219. ⟨10.1016/j.neucli.2015.03.002⟩. ⟨hal-03465478⟩

Chapitre d'ouvrage

Void Fraction Influence Over Aqueous Foam Flow: Wall Shear Stress and Core Shear Evolution

Rogelio Chovet, Fethi Aloui

In this study, the two main transport characterization problems of the foam flow are studied: foam flow stability, through the evolution of the velocity at the core of the foam, and rheology, with the study of the wall shear stress over the lateral walls, for different void fractions. The same...

Progress in Clean Energy Volume 1 Analysis and Modeling, Springer International Publishing, pp.909-931, 2015, ⟨10.1007/978-3-319-16709-1_66⟩. ⟨hal-03579829⟩

Article dans une revue

Observer design for Takagi-Sugeno descriptor models: an LMI approach

Víctor Estrada Manzo, Thierry-Marie Guerra, Zsofia Lendek

This paper considers observer design for nonlinear descriptor systems. We propose approaches based on Takagi-Sugeno (TS) models. An extended estimation vector is used in order to keep the descriptor structure of the observer. The design conditions for this new type of observers are expressed as LMI...

Automatica, 2015, 52, pp.154-159. ⟨10.1016/j.automatica.2014.11.008⟩. ⟨hal-03428793⟩

Communication dans un congrès

Improving observer design for discrete-time TS descriptor models under the quadratic framework

Víctor Estrada Manzo, Zsofia Lendek, Thierry-Marie Guerra

The paper presents a new quadratic Lyapunov function for observer design for discrete-time nonlinear descriptor systems. The main idea is to represent the original nonlinear model as a Takagi- Sugeno one and then use Lyapunov's direct method to design the observer. The well-known Finsler'...

2nd IFAC Conference on Embedded Systems, Computer Intelligence and Telematics (CESCIT 2015), Jun 2015, Maribor, Slovenia. pp.276-281, ⟨10.1016/j.ifacol.2015.08.144⟩. ⟨hal-03416362⟩