Publicaciones

• Communication dans un congrès

Validation of a new numerical weaving tool highlighting the influence of real yarn positions and shapes on their behaviour under impact

Mickael Lequin, E. Ferry, Benjamin Provost, Daniel Coutellier, François Boussu

In this study, a numerical simulation approach is used to measure the influence of yarn positions inside a 3D warp interlock fabric submitted to impact. Four numerical results have been compared to one experimental impact test. A first simulation is made directly from the experimental tomographic...

13th AUTEX World Textile Conference, May 2013, Dresde, Germany. ⟨hal-03512879⟩

• Communication dans un congrès

Holonic recursiveness with multi-agent system technologies

Sonia Suárez, Paulo Leitão, Emmanuel Adam

Recursive Systems are often needed or recommended for automatically deploy or build a software system composed of multiple entities on a large network, or on distributed locations, without a central control. We use the recursive definitions proposed in holonic systems, as the recursiveness is an...

11th International Conference on Practical Applications of Agents and multi-Agents systems, May 2013, Salamanque, Spain. pp.103-111, 978-3-319-00562-1, ⟨10.1007/978-3-319-00563-8_13⟩. ⟨hal-03472711⟩

• Article dans une revue

Design guidelines for quality of service support in Optimized Link State Routing-based mobile ad hoc networks

Patrick Sondi, Dhavy Gantsou, Sylvain Lecomte

he proposals for quality of service in mobile ad hoc networks have focused on adding QoS mechanisms in best-effort routing protocols while keeping the same assumptions regarding both the network representation and the routing protocol design. Most of the solutions concentrate the algorithmic effort...

Ad Hoc Networks, 2013, 11 (1), pp.298-323. ⟨10.1016/j.adhoc.2012.06.001⟩. ⟨hal-03451428⟩

• Article dans une revue

Analysis of inverse method applied on sandwich probes

Emna Berrich, Fethi Aloui, Jack Legrand

Parallel plate disks (PPD) are often used for analyzing the effect of small amplitude oscillations with different frequencies. These devices allow the imposing of a well-known flow kinematics. Mass transfer problems and, particularly, convection-diffusion problems relating wall shear rate to mass...

Journal of Fluids Engineering, 2013, 135 (1), ⟨10.1115/1.4007888⟩. ⟨hal-03521107⟩

• Rapport

Déploiement des concepts de la Coopération Homme-Machine dans l’inspection filtrage aéroportuaire

Igor Crevits, Frédéric Vanderhaegen

[Rapport de recherche] LAMIH, Valenciennes; CHM. 2013. ⟨hal-03467548⟩

• Article dans une revue

Benchmarking Flexible Job-Shop Scheduling and Control Systems

Damien Trentesaux, Cyrille Pach, Abdelghani Bekrar, Yves Sallez, Thierry Berger, Thérèse Bonte, Paulo Leitão, José Barbosa

Benchmarking is comparing the output of different systems for a given set of input data in order to improve the system's performance. Faced with the lack of realistic and operational benchmarks that can be used for testing optimization methods and control systems in flexible systems, this...

Control Engineering Practice, 2013, 21 (9), pp.1204-1225. ⟨10.1016/j.conengprac.2013.05.004⟩. ⟨hal-03405597⟩

• Article dans une revue

Using the BCD model for risk analysis

Karima Sedki, Philippe Polet, Frédéric Vanderhaegen

In this paper, we are interested in addressing risk analysis. We propose an influence diagram-based approach that focuses on a Benefit, Cost, Deficit (BCD) model. The BCD model is proposed for studying the intentional deviant behaviors of human operators in a system. In this model, the consequences...

Engineering Applications of Artificial Intelligence, 2013, 26 (9), pp.2172-2183. ⟨10.1016/j.engappai.2013.06.009⟩. ⟨hal-03405576⟩

• Communication dans un congrès

A MULTIDISCIPLINARY CLIENT-SERVER PLATFORM

Eric Cartignies, Jean-Charles Canonne, Jean-Paul Becar, Laurent Vermeiren, Fabrice Robert

The academic syllabus of the Electrical Enginering and industrial data processing taught inside the french Institutes of Technology offers a course called Industrial Ethernet and remote control with the internet. The aim of this module consists in making students more sensitive to the use of...

International Conference on Education, IADAT e2013, Jul 2013, BILBAO, Spain. ⟨hal-02521176⟩

• Communication dans un congrès

Upgrade of Corrosiveness Nature of Fish Waste Bio-Oil Using a Hybrid Catalyst (MgO/Na2CO3) Optimization Process

Nadia Mrad, Fethi Aloui, Mohand Tazerout

In this work, catalytic cracking of waste fish oil (WFO) to bio-fuel for ă diesel engine was studied over hybrid catalysts (Sodium carbonate ă Na2CO3/Magnesium oxide). The experiments were conducted using a fix-bed ă reactor. The effect of catalyst-to-WFO ratio and the amount of each ă catalyst...

ASME 2013 Fluids Engineering Division Summer Meeting, Jul 2013, Incline Village, United States. ⟨10.1115/FEDSM2013-16391⟩. ⟨hal-01464702⟩

• Communication dans un congrès

Vers la modélisation des assemblages rivetés par super-éléments finis en dynamique rapide

Claire Hennuyer, Nicolas Leconte, Bertrand Langrand, Eric Markiewicz

Lorsqu'une structure aéronautique est soumise à des sollicitations de dynamique rapide, des phénomènes de localisation des contraintes apparaissent au niveau des assemblages rivetés. L'analyse par éléments finis du comportement de la structure complète de l'avion implique...

11e colloque national en calcul des structures, CSMA, May 2013, Giens, France. ⟨hal-01722105⟩