Publicaciones

• Article dans une revue

Liquid hydrocarbon fuels from fish oil industrial residues by catalytic cracking

Nadia Mrad, Maria Paraschiv, Fethi Aloui, Edwin Geo Varuvel, Mohand Tazerout, Sassi Ben Nasrallah

In the present work, catalytic cracking of fish oil industrial residue was investigated to study the effect of temperature, type of catalyst and the heating rate on the yield of organic liquid fraction (OLF) and its acid value. The highest bio-oil yield of 72% (wt.) was obtained at temperature...

International Journal of Energy Research, 2013, 37 (9), pp.1036-1043. ⟨10.1002/er.2906⟩. ⟨hal-00935904⟩

• Communication dans un congrès

Application of a Co-evolutionary Genetic Algorithm to solve the Periodic Railway Timetabling Problem

Luis Diego Arenas Pimentel, Rémy Chevrier, Clarisse Dhaenens, Said Hanafi, Joaquin Rodriguez

In train operations, a timetable is used to establish the departure and arrival times for the trains at the stations or other relevant locations in the rail network or a subset of this network. The elaboration of a timetable responds to the commercial needs of the customers, for both passenger and...

IESM 2013, 5th international conference on industrial engineering and system management, Oct 2013, Rabat, Morocco. 10p. ⟨hal-00909588⟩

• Article dans une revue

Introduction

Yacine Bellik, Christophe Kolski

Depuis quelques années, linformatique a commencé à envahir des espaces de plus en plus larges de notre environnement quotidien. Elle sest très vite répandue dans des objets qui en étaient quasiment dépourvus (lave-linge, appareils photos, téléphones, autoradios, etc.). La recherche porte aujourdhui...

Revue des Sciences et Technologies de l'Information - Série TSI : Technique et Science Informatiques, 2013, 32, pp.543-545. ⟨hal-01836653⟩

• Ouvrages

Social, Localisation et Mobilité : de nouveaux enjeux pour la gestion des données

Florence Sèdes, Thierry Delot

Sèdes, Florence; Delot, Thierry. Hermès Science, Numéro spécial (18 : 1), 2013, Ingénierie des Systèmes d'Information (ISI), ISSN 1633-1311. ⟨hal-03761353⟩

• Article dans une revue

Plastic deformation of structural steels under hot-working conditions

Eli Saúl Puchi-Cabrera, Jean-Dominique Guerin, Damien Barbier, Mirentxu Dubar, Jacky Lesage

The present study has been conducted in order to formulate a rational description of the flow stress of structural steels, when these are deformed in tension under hot-working conditions. The simplified formulation that has been developed only involves the analysis of the positive work-hardening...

Materials Science and Engineering: A, 2013, 559, pp.268-275. ⟨10.1016/j.msea.2012.08.097⟩. ⟨hal-00742740⟩

• Article dans une revue

Variable neighborhood search for location routing

Bassem Jarboui, Houda Derbel, Said Hanafi, Nenad Mladenovic

In this paper we propose various neighborhood search heuristics (VNS) for solving the location routing problem with multiple capacitated depots and one uncapacitated vehicle per depot. The objective is to find depot locations and to design least cost routes for vehicles. We integrate a variable...

Computers and Operations Research, 2013, 40 (1), pp.47-57. ⟨10.1016/j.cor.2012.05.009⟩. ⟨hal-03594471⟩

• Ouvrages

Ergonomie des Systèmes Homme-machine

Patrick Millot

Patrick Millot. Hermès science publications. Lavoisier, 386 pp., 2013, 978-2-7462-3920-3. ⟨hal-03467984⟩

• Chapitre d'ouvrage

Context-Aware MDA Approach for Content Personalization in User Interface Development

Káthia Marçal de Oliveira, Firas Bacha, Mourad Abed

Progressions and Innovations in Model-Driven Software Engineering, pp.88-105, 2013. ⟨hal-03379056⟩

• Article dans une revue

Roughness signature of tribological contact calculated by a new method of peaks curvature radius estimation on fractal surfaces

Maxence Bigerelle, Jean-Marie Nianga, Denis Najjar, Alain Iost, Cédric Hubert, K. J. Kubiak

This paper proposes a new method of roughness peaks curvature radii calculation and its application to tribological contact analysis as characteristic signature of tribological contact. This method is introduced via the classical approach of the calculation of radius of asperity. In fact, the...

Tribology International, 2013, 65 (65), pp.235-247. ⟨10.1016/j.triboint.2013.03.017⟩. ⟨hal-01065878⟩

• Article dans une revue

Armouring solutions against high velocity impact using 2D laminates and 3D warp interlock composites

Benjamin Provost, François Boussu, Daniel Coutellier, Daniel Vallée, Fabien Rondot, Julien Nussbaum

Since the emergence of the first armoured vehicles on battlefields, armour shield was mainly centred on conventional metallic materials, widespread solutions nowadays. For a long time, weight reduction in armoured protection, which represents the largest part of the vehicle’s overall weight, has...

Journal of Industrial Textiles, 2013, ⟨10.1177/1528083713498914⟩. ⟨hal-03644392⟩