FrançaisEnglishEspañol

accès directs

Annuaire
Espace numérique de travail
Laboratoires de recherche

Fethi
ALOUI

  • Bâtiment Gromaire 1
    Bureau B4
  • +33 3 27 51 1962
My introduction to research began in 1988 with the preparation of my Diploma of Advanced Studies. My research topic was around the flow investigation of pulp to study the flocculation and the turbulence for a non newtonian two-phase solid/liquid fluid. In 1989, I started the preparation of my Ph.D. thesis on the Two-phase gas-liquid flows in singularities. During my career, I have addressed several research topics, e.g. instabilities encountered in Couette-Taylor systems, turbulent imping jets, unsteady flows and mass transfer around obstacles to study experimentally and numerically coherent structures, development of Lattice Boltzmann Method (LBM) for numerical simulations in unsteady fluid flows and mass transfers, heat transfer in porous media for Stirling engines, transfer to interface, gas-liquid foam flow using experimental and numerical investigation tools, heat transfer at interfaces, heat exchangers and energy optimization in Stirling engines, Process engineering, biofuel process production from waste fish and finally CO2 capture.
I developed new approaches based on model experiments, required for the understanding of wall mass transfer phenomena, and the data post-processing for turbulent coherent structures. This work has served as a reference for the whole of the unsteady and turbulent topic community. Furthermore, I have acquired during my career specific experience on issues related to the industry. 
Since 2008, I serve as Associate Editor of the “Journal of Applied Fluid Mechanics” (IF: 1.09, accepted recently by Elsevier), and since 2013 I serve as Associate Editor of the “International Journal of Energy Research” (IF: 3.343, Wiley). Nevertheless, I continue my research activities in the field of gas-liquid two-phase flow (foam flows) and energetic investigations on the Stirling thermal machines (receipt and drive machines). More recently, I have also been interested in developing a research project on CO2 capture in collaboration with several researchers from the SRM Institute of Science and Technology from India and the Tsinghua University at Beijing (China). 

Fonctions actuelles

Diplômes universitaires

  • 2007 :

    Habilitation for Heading Research (necessary for a position of Professor) or HDR (Authorization/Accreditation to Supervise Researches) at University of Nantes, France. Discipline: "Process Engineering", Specialty: "Fluid Mechanics and Transfers" Dissertation: "Transfer analysis in single-phase and two-phase gas-liquid flow: Development of diagnostic methods"

  • 1994 :

    Ph.D. at the National Polytechnic Institute of Lorraine (INPL), Nancy, France
    Discipline: "Mechanical Engineering and Energetics", Specialty: "Fluid Mechanics and Transfers". Dissertation: "Study of single liquid phase and two-phase gas-liquid flows througth 2D and axisymmetric sudden expansions"

Expériences professionnelles

  • 1994 - Current :
    • 2020 - Current: Full University Professor - INSA Hauts-de-France (INSA HDF, LAMIH UMR 8201)
    • 2018 - 2020: Full University Professor - Polytechnic University Hauts-de-France (UPHF, LAMIH UMR 8201)
    • 2015 - 2018: Full University Professor - University of Valenciennes (UVHC, LAMIH UMR 8201)
    • 2011 - 2015: Full University Professor - University of Valenciennes (UVHC, TEMPO EA 4542)
    • 2007 - 2011: Associate Professor (HDR) - University of Nantes (UN, GEPEA UMR 6144)
    • 1997 - 2007: Assistant Professor - University of Nantes (UN, GEPEA UMR 6144)
    • 1994 -1997: Post-Doc - National Polytechnic Institute of Lorraine at Nancy (INPL, LEMTA UMR 7563)

Valorisations academiques

Organisation de conférences, expositions...

Éditeur

https://link.springer.com/book/9789811682773 (Energy and Exergy for Sustainable and Clean Environment, Volume 1)

https://link.springer.com/book/9789811682735 (Energy and Exergy for Sustainable and Clean Environment, Volume 2)

Revue internationale avec comité de lecture

Dallagi H., Dari C., Fameau A.-L., Aloui F., Faille C., Benezech T. (2024). Wet foam flow for cleaning food industry equipment: Role of geometry in maintaining removal efficiency of Bacillus spores. Journal of Food Engineering, 376, pp. 112064. [IF=5.5] [DOI=https://doi.org/10.1016/j.jfoodeng.2024.112064].

Praveena V., Jesu martin M., Matijosius J., Aloui F., Pugazhendhi A., Varuvel E. (2024). A Systematic Review on Biofuel Production and Utilization from Algae and Waste Feedstocks– A Circular Economy Approach Renewable and Sustainable Energy Reviews. Renewable and Sustainable Energy Reviews, 192, pp. 114178. [IF=15.9] [DOI=https://doi.org/10.1016/j.rser.2023.114178].

Salhi M., Berrich E., Romdhane M., Aloui F. (2023). Experimental investigation of additives effect on olive pomaces pyrolysis: Oyster shells and olive mill waste water. Biomass and Bioenergy, 175, pp. 106815. [IF=5.774] [DOI=https://doi.org/10.1016/j.biombioe.2023.106815].

Soltani I., Berrich E., Romdhane M., Aloui F. (2023). Heating rate and ZSM-5 catalyst Effects on Date Palm (Phœnix dactylifera L.) Stones pyrolysis: Thermogravimetric analysis, production and characterization of bio-oils and syngases. Journal of the Energy Institute, pp. 101295. [IF=6.47] [DOI=https://doi.org/10.1016/j.joei.2023.101295].

Praveena V., Bai F., Balasubramanian D., Devarajan Y., Aloui F., Varuvel E. (2023). Experimental assessment on the performance, emission and combustion characteristics of a safflower oil fueled CI engine with hydrogen gas enrichment. FUEL, 334, pp. 126682. [IF=6.609] [DOI=https://doi.org/10.1016/j.fuel.2022.126682].

Hachem H., Gheith R., Aloui F. (2022). Theoretical investigations of Stirling engine performances for different filling gas properties. International Journal of Energy Research, 46 (14), pp. 20462-20479. [IF=4.6] [DOI=https://doi.org/10.1002/er.7875].

Dallagi H., Faille C., Gruescu C., Aloui F., Benezech T. (2022). Foam flow cleaning, an effective and environmentally friendly method for controlling the hygiene of closed surfaces contaminated with biofilms. Food and Bioproducts Processing, 136, pp. 236-248. [IF=4.6] [DOI=https://doi.org/10.1016/j.fbp.2022.09.014].

Varuvel E., Thiyagarajan S., Sonthalia A., Prakash T., Awad S., Aloui F., Pugazhendhi A. (2022). Some studies on reducing carbon dioxide emission from a CRDI engine with hydrogen and a carbon capture system. International Journal of Hydrogen Energy, 47 (62), pp. 26746-26757. [IF=7.2] [DOI=https://doi.org/10.1016/j.ijhydene.2021.12.174].

Berrich E., Salhi M., Romdhane M., Aloui F. (2022). Experimental study of Nitrogen Flow rate effect on Olives pomaces wastes using Thermogravimetric analysis. International Journal of Global Warming, 27 (No. 2), pp. 143-154. [IF=1.086] [DOI=https://doi.org/10.1504/IJGW.2022.123277].

Dallagi H., Faille C., Bouvier L., Deleplace M., Dubois T., Aloui F., Benezech T. (2022). Wet foam flow: A suitable method for improving surface hygiene in the food industry. Journal of Food Engineering, 322, pp. 110976. [IF=5.354] [DOI=https://doi.org/10.1016/j.jfoodeng.2022.110976].

Dallagi H., Aloui F., Bouvier L., Wauquier L., Benezech T. (2022). Numerical and experimental investigations into the rheological behaviour of wet foam flowing under a fence. Food and Bioproducts Processing, 132, pp. 211-225. [IF=4.6] [DOI=https://doi.org/10.1016/j.fbp.2021.12.009].

Mahmoudirad S., Shirani E., Aloui F. (2021). Study of circular Couette flow, Taylor vortex and wavy vortex regimes in Couette–Taylor flows with transient periodic oscillation of the inner cylinder—a computational fluid dynamics analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43. [IF=2.22] [DOI=https://doi.org/10.1007/s40430-021-03265-1].

Varuvel E., Thiyagarajan S., Sonthalia A., Prakash T., Awad S., Aloui F., Pugazhendhi A. (2021). CO2 reduction in a common rail direct injection engine using the combined effect of low carbon biofuels, hydrogen and a post combustion carbon capture system. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, pp. 1-20. [IF=3.447] [DOI=https://doi.org/10.1080/15567036.2021.1974128].

Deponte H., Djendar D., Eckert T., Aloui F., Augustin W., Scholl S. (2021). Fluid dynamic investigation of particle-laden suspension on dimpled surfaces under fouling conditions. International Journal of Multiphase Flow, 140, pp. 103651. [IF=2.509] [DOI=https://doi.org/10.1016/j.ijmultiphaseflow.2021.103651].

Al saabi A., Dallagi H., Aloui F., Faille C., Rauwel G., Wauquier L., Bouvier L., Benezech T. (2021). Removal of Bacillus spores by flowing foam from stainless steel pipes: Effect of the foam quality and velocity. Journal of Food Engineering, 289, pp. 110273. [IF=4.499] [DOI=https://doi.org/10.1016/j.jfoodeng.2020].

Varuvel E., Fol G., Aloui F., Thiyagarajan S., Jerome stanley M., Sonthalia A., Brindhadevi K., Saravanan C. (2021). Experimental analysis to reduce CO2 and other emissions of CRDI CI engine using low viscous biofuels. Fuel, 283, pp. 118829. [IF=6.609] [DOI=https://doi.org/10.1016/j.fuel.2020.118829].

Thiruvenkatachari S., Saravanan C., Varuvel E., Vikneswaran M., Udayakumar R., Aloui F. (2021). Experimental investigations on the production and testing of azolla methyl esters from Azolla microphylla in a compression ignition engine. Fuel, 287, pp. 119448. [IF=6.609] [DOI=https://doi.org/10.1016/j.fuel.2020.118829].

Varuvel E., Nagarajan G., Nagalingam M., Aloui F., Tazerout M. (2020). A comparative analysis of different methods to improve the performance of rubber seed oil fuelled compression ignition engine. Fuel, 280, pp. 118644. [IF=6.609] [DOI=https://doi.org/10.1016/j.fuel.2020.118644].

Rejeb H., Berrich E., Chahbani M., Aloui F. (2020). Energetic valourisation of waste tyres by pyrolysis: catalyst effect on tyres derived oil and gases. International Journal of Global Warming. [IF=1.086] [DOI=https://doi.org/10.1504/IJGW.2020.106593].

Varuvel E., Prabhu C., Thiyagarajan S., Maiyalagan T., Aloui F. (2020). Comparative analysis of various techniques to improve the performance of novel wheat germ oil–An experimental study. International Journal of Hydrogen Energy, 45 (9), pp. 5745-5756. [IF=5.816] [DOI=https://doi.org/10.1016/j.ijhydene.2019.05.198].

Varuvel E., Godwin D., Thiyagarajan S., Saravanan C., Aloui F. (2019). Effect of higher and lower order alcohol blending with gasoline on performance, emission and combustion characteristics of SI engine. Fuel, 256 (15), pp. 115806. [IF=6.609] [DOI=https://doi.org/10.1016/j.fuel.2019.115806].

Aloui F., Gaied L., Abassi W., Lippert M., Bigerelle M. (2019). Conductimetry technique for the measurement of thin liquid film thickness between two solid surfaces in relative motion: hydrodynamic lubrication. Mechanics & Industry, 20(6), pp. 601-610. [IF=0.95] [DOI=https://doi.org/10.1051/meca/2019035].

Godwin D., Varuvel E., Thiyagarajan S., Jesu martin M., Maiyalagan T., Saravanan C., Aloui F. (2019). Effect of hydroxyl (OH) group position in alcohol on performance, emission and combustion characteristics of SI engine. Energy Conversion and Management, 189, pp. 195-201 [DOI=https://doi.org/10.1016/j.enconman.2019.03.063].

Hachem H., Gheith R., Aloui F., Delprat S., Paganelli S. (2019). Energetic and exergetic investigations of an innovative heat recovery exhaust system using a double acting type Stirling engine based on theoretical analysis. International Journal of Exergy, 28 (3), pp. 273-300. [IF=1.35] [DOI=10.1504/IJEX.2019.098615].

Varuvel E., Sonthalia A., Nagarajan G., Nagalingam M., Aloui F. (2019). Effect of Port Premixed Liquefied Petroleum Gas on the Engine Characteristics. J. Energy Resour. Technol., 141 (11), pp. 112206. [IF=2.903] [DOI=https://doi.org/10.1115/1.4043698].

Mehrez I., Gheith R., Aloui F., Ben nasrallah S. (2019). Theoretical and numerical study of Couette‐Taylor flow with an axial flow using lattice Boltzmann method. International Journal for Numerical Methods in Fluids, 90 (2), pp. 427-441. [IF=2.107] [DOI=https://doi.org/10.1002/fld.4727].

Modaresi M., Shirani E., Charmiyan M., Aloui F., Koched A., Pavageau M. (2019). Numerical and experimental investigation of impinging turbulent flow of twin jets against a wall. Scientia Iranica, 26 (6), pp. 3271-3282. [IF=1.435] [DOI=10.24200/SCI.2018.50369.1663].

Cornu D., Lippert M., Kerhervé F., Aloui F., Keirsbulck L. (2018). Hydrodynamic oscillations inside deep cavities with wall offset. European Journal of Mechanics-B/Fluids, 72, pp. 403-409. [IF=2.183] [DOI=https://doi.org/10.1016/j.euromechflu.2018.04.013].

Josephin J., Varuvel E., Sonthalia A., Bharatiraja C., Aloui F. (2018). Predicting the different engine parameters of a rubberb seed oil-ethanol dual fuel engine using artificial neural networks. International Journal of Global Warming, 485-506, pp. 26. [IF=1.086] [DOI=10.1504/IJGW.2018.095995].

Varuvel E., Sonthalia A., Subramanian T., Aloui F. (2018). NOx-smoke trade-off characteristics of minor vegetable oil blends synergy with oxygenate in a commercial CI engine. Environmental Science and Pollution Research, 25, pp. 35715-35724. [IF=4.223] [DOI=https://doi.org/10.1007/s11356-018-3484-y].

Hachem H., Gheith R., Aloui F., Ben nasrallah S. (2018). Technological challenges and optimization efforts of the Stirling machine: A review. Energy conversion and management, 171, pp. 1365-1387. [IF=9.709] [DOI=https://doi.org/10.1016/j.enconman.2018.06.042].

Varuvel E., Sonthalia A., Aloui F. (2018). Study of engine performance, emission and combustion characteristics fueled with diesel-like fuel produced from waste engine oil and waste plastics. Frontiers of Environmental Science & Engineering, 2, pp. 8. [IF=4.357] [DOI=https://doi.org/10.1007/s11783-018-1063-6].

Charmiyan M., Azimian A., Shirani E., Aloui F., Michotte B. (2017). 3D tomographic PIV, POD and vortex identification of turbulent slot jet flow impinging on a flat plate. Journal of Mechanical Science and Technology, 31, pp. 5347-5357, ISSN 1976-3824. [IF=1.734] [DOI=10.1007/s12206-017-1029-9].

Hachem H., Gheith R., Aloui F., Ben nasrallah S. (2017). Optimization of an air-filled Beta type Stirling refrigerator. International Journal of Refrigeration, 76, pp. 296-312, ISSN 0140-7007. [IF=3.629] [DOI=https://doi.org/10.1016/j.ijrefrig.2017.02.019].

Zacchello B., Oko E., Wang M., Aloui F. (2017). Process simulation and analysis of carbon capture with an aqueous mixture of ionic liquid and monoethanolamine solvent. International Journal of Coal Science & Technology, 4, pp. 25-32, ISSN 2198-7823. [IF=3.82] [DOI=10.1007/s40789-016-0150-1].

Varuvel E., Mrad N., Aloui F., Tazerout M. (2017). Experimental analysis of fuel from fish processing industry waste in a diesel engine. Clean Technologies and Environmental Policy, 19, pp. 1099–1108. [IF=3.636] [DOI=https://doi.org/10.1007/s10098-016-1303-z].

Cornu D., Keirsbulck L., Kerhervé F., Aloui F., Lippert M. (2016). On the vortex dynamics of shear-driven deep cavity flows with asymmetrical walls. Canadian Journal of Physics, 1344-1352, pp. 94. [IF=1.24] [DOI=10.1139/cjp-2016-0305].

Berrich E., Aloui F., Pierrat D., Gros L., Couzinet A., Legrand J. (2016). Turbulent Flows Structures Crossing Conical Diffusers: Angle Effect Analysis using PIV Technique and POD for Post-Processing. Journal of Applied Fluid Mechanics, 9, pp. 19-29. [IF=1.405]

Abassi W., Aloui F., Legrand J. (2016). Use of the PIV and Electrochemical Techniques to Experimentally Characterize the Couette-Taylor-Poiseuille Flow Instabilities. Journal of Applied Fluid Mechanics, 9, pp. 59-68. [IF=1.405]

Chovet R., Aloui F. (2016). Liquid Film Thickness: Study and Influence over Aqueous Foam Flow. Journal of Applied Fluid Mechanics, 9, pp. 39-48. [IF=1.405]

Berrich E., Aloui F., Legrand J. (2016). Experimental Investigations on Oscillatory CouetteTaylor Flow Wall Shear Stress Behavior using Electrochemical Technique: Low Modulation Effect. Journal of Applied Fluid Mechanics, 9, pp. 147-154. [IF=1.405]

Monfared M., Shirani E., Salimpour M., Aloui F. (2016). Numerical and experimental study on the flow history effects of axial flow on the Couette--Taylor flow. Acta Mechanica, 227, pp. 1999-2010. [IF=2.166] [DOI=10.1007/s00707-016-1592-7].

Berrich E., Fellah A., Ben brahim A., Aloui F., Feidt M. (2016). Thermodynamic Analysis of the Irreversibilities in Solar Absorption Refrigerators. Entropy, 18, pp. 107-116. [IF=2.494] [DOI=10.3390/e18040107].

Berrich E., Fellah A., Ben brahim A., Aloui F., Feidt M. (2016). Hierarchical Decomposition Thermodynamic Approach for the Study of Solar Absorption Refrigerator Performance. Entropy, 18, pp. 82-90, ISSN ISSN 1099-4300. [IF=2.494] [DOI=doi:10.3390/e18030082].

Tounsi N., Mestiri R., Keirsbulck L., Oualli H., Hanchi S., Aloui F. (2016). Experimental Study of Flow Control on Bluff Body using Piezoelectric Actuators. Journal of Applied Fluid Mechanics, 90 (2), pp. 827-838. [IF=1.405] [DOI=10.18869/ACADPUB.JAFM.68.225.24488].

Fadla F., Chovet R., Cornu D., Lippert M., Aloui F., Keirsbulck L. (2016). Spatial Resolution Correction for Electrochemical Wall-shear Stress Measurements using Rectangular Sensors. Journal of Applied Fluid Mechanics, 90 (3), pp. 1309-1319. [IF=1.405] [DOI=10.18869/ACADPUB.JAFM.68.228.23945].

Gheith R., Aloui F., Ben nasrallah S. (2016). Improvement of a non energy-consuming system: A gamma Stirling engine. Environmental Engineering & Management Journal (EEMJ), 15 (1), pp. 133-141. [IF=0.916]

Charmiyan M., Azimian A., Keirsbulck L., Shirani E., Aloui F. (2016). Turbulent Plane Impinging Jet-Physical Insight and Turbulence Modeling. Journal of Applied Fluid Mechanics, 9, pp. 11-17. [IF=1.405]

Hachem H., Gheith R., Aloui F., Ben nasrallah S., Dincer I. (2016). Exergy assessment of heat transfer inside a Beta type Stirling engine. International Journal of Exergy, 20, pp. 186-202. [IF=1.383] [DOI=https://dx.doi.org/10.1504/IJEX.2016.076863].

Ahmadi M., Ahmadi A., Ashouri M., Razie A., Ghasempour R., Aloui F. (2016). Prediction of performance of Stirling engine using least squares support machine technique. Mechanics & Industry, 5, pp. 506. [IF=0.23] [DOI=10.1051/meca/2015098].

Monfared M., Shirani E., Aloui F., Salimpour M. (2016). Numerical and Experimental Study on the Effects of Taylor Number on the Wavelength of the Couette-Taylor Flow. Journal of Applied Fluid Mechanics, 9, pp. 49-58. [IF=1.405]

Gheith R., Hachem H., Aloui F., Ben nasrallah S. (2015). Experimental and theoretical investigation of Stirling engine heater: Parametrical optimization. Energy Conversion and Management, 105, pp. 285-293, ISSN 0196-8904. [IF=9.709] [DOI=http://dx.doi.org/10.1016/j.enconman.2015.07.063].

Hachem H., Creyx M., Gheith R., Delacourt é., Morin C., Aloui F., Ben nasrallah S. (2015). Comparison Based on Exergetic Analyses of Two Hot Air Engines: A Gamma Type Stirling Engine and an Open Joule Cycle Ericsson Engine. Entropy, 17, pp. 7331-7348, ISSN 1099-4300. [IF=2.494] [DOI=10.3390/e17117331].

Hachem H., Gheith R., Aloui F., Ben nasrallah S. (2015). Numerical characterization of a γ-Stirling engine considering losses and interaction between functioning parameters. Energy Conversion and Management, 96, pp. 532-543. [IF=4.801] [DOI=https://doi.org/10.1016/j.enconman.2015.02.065].

Gheith R., Aloui F., Ben nasrallah S. (2015). Determination of adequate regenerator for a Gamma-type Stirling engine. Applied Energy, 139, pp. 272-280, ISSN 0306-2619. [IF=9.746] [DOI=http://dx.doi.org/10.1016/j.apenergy.2014.11.011].

Abassi W., Aloui F., Keirsbulck L., Ben nasrallah S. (2015). Experimental and Numerical Investigations Using Lattice Boltzmann Method to Study Shedding Vortices in an Unsteady Confined Flow Around an Obstacle. Journal of Fluids Engineerings, 137 (10), ISSN 0098-2202. [IF=1.995] [DOI=https://doi.org/10.1115/1.4030487].

Mestiri R., Dahmouni A., Hadaji R., Ben nasrallah S., Aloui F. (2014). Dynamic Behavior of Printed-Circuits Plasma Actuator Based on DC Electrical Discharge: Application in Aerodynamics. Plasma Science, IEEE Transactions on, 42 (7), pp. 1854-1860. [IF=1.309] [DOI=10.1109/TPS.2014.2328573].

Mestiri R., Ahmed-Bensoltane A., Keirsbulck L., Aloui F., Labraga L. (2014). Active flow control at the rear end of a Generic car model using steady blowing. Journal of Applied Fluid Mechanics, 7 (4), pp. 565-571. [IF=1.405] [DOI=10.36884/JAFM.7.04.21752].

Gheith R., Aloui F., Ben nasrallah S. (2014). Study of temperature distribution in a Stirling engine regenerator. Energy Conversion and Management, 88, pp. 962-972. [IF=9.709] [DOI=https://doi.org/10.1016/j.enconman.2014.09.043].

Gheith R., Aloui F., Ben nasrallah S. (2013). Optimization of Stirling engine performance based on an experimental design approach. International Journal of Energy Research, 37 (12), pp. 1519-1528, ISSN 1099-114X. [IF=5.164] [DOI=https://doi.org/10.1002/er.2964].

Mrad N., Paraschiv M., Aloui F., Varuvel E., Tazerout M., Ben nasrallah S. (2013). Liquid hydrocarbon fuels from fish oil industrial residues by catalytic cracking. International Journal of Energy Research, 37 (9), pp. 1036-1043, ISSN 1099-114X. [IF=5.164] [DOI=https://doi.org/10.1002/er.2906].

Berrich E., Aloui F., Legrand J. (2013). Experimental validation and critical analysis of inverse method in mass transfer using electrochemical sensor. Experimental Thermal and Fluid Science, 44, pp. 253-263, ISSN 0894-1777. [IF=3.232] [DOI=https://doi.org/10.1016/j.expthermflusci.2012.07.001].

Berrich E., Aloui F., Legrand J. (2013). Analysis of inverse method applied on sandwich probes. Journal of Fluids Engineering, 135 (1), ISSN 0098-2202. [IF=1.995] [DOI=https://doi.org/10.1115/1.4007888].

Varuvel E., Mrad N., Tazerout M., Aloui F. (2012). Assessment of liquid fuel (bio-oil) production from waste fish fat and utilization in diesel engine. Applied Energy, 100, pp. 249-257, ISSN 0306-2619. [IF=9.746] [DOI=https://doi.org/10.1016/j.apenergy.2012.05.035].

Gheith R., Aloui F., Tazerout M., Ben nasrallah S. (2012). Experimental investigations of a gamma Stirling engine. International Journal of Energy Research, 36 (12), pp. 1175-1182, ISSN 1099-114X. [IF=5.164] [DOI=https://doi.org/10.1002/er.1872].

Varuvel E., Mrad N., Tazerout M., Aloui F. (2012). Experimental analysis of bio-fuel as an alternative fuel for diesel engines. Applied Energy, 94, pp. 224-231, ISSN 0306-2619. [IF=5.261] [DOI=https://doi.org/10.1016/j.apenergy.2012.01.067].

Gheith R., Aloui F., Ben nasrallah S. (2012). Study of the regenerator constituting material influence on a Gamma type Stirling engine. Journal of Mechanical Science and Technology, 26, pp. 1251-1255, ISSN 1738-494X. [IF=1.734] [DOI=https://doi.org/10.1007/s12206-012-0218-9].

Koched A., Pavageau M., Aloui F. (2012). Vortex structure in the wall region of an impinging plane jet. Journal of Applied Fluid Mechanics, 4 (3), pp. 61-69. [IF=1.405] [DOI=10.36884/JAFM.4.03.11935].

Berrich E., Fellah A., Ben brahim A., Aloui F., Feidt M. (2012). On solar absorption refrigerator's performances. Ecological Engineering and Environment Protection, 3, pp. 20-26, ISSN ISSN 1311 - 8668

Mrad N., Varuvel E., Tazerout M., Aloui F. (2012). Effects of biofuel from fish oil industrial residue - Diesel blends in diesel engine. Energy, 44 (1), pp. 955-963, ISSN 0360-5442. [IF=7.147] [DOI=https://doi.org/10.1016/j.energy.2012.04.056].

Mestiri R., Aloui F., Hadaji R., Ben nasrallah S. (2012). Experimental Application of the Electroaerodynamic Actuator for Airflow Control. Journal of Computational and Applied Research in Mechanical Engineering, 1 (2), pp. 69-76. [IF=0.57] [DOI=http://dx.doi.org/10.22061/jcarme.2012.25].

Benattalah S., Aloui F., Souhar M. (2011). Experimental analysis on the counter-current Taylor bubble flow in a smooth vertical conduct of small diameter. Journal of Applied Fluid Mechanics, 4 (4), pp. 1-14, ISSN 1735-3572. [IF=1.405] [DOI=10.36884/JAFM.4.04.11940].

Berrich E., Aloui F., Legrand J. (2011). Inverse method for the dynamical analysis of wall shear rates using three-segment probes in parallel plate rheometer. Chemical Engineering Science, 66 (17), pp. 3969-3978. [IF=4.311] [DOI=https://doi.org/10.1016/j.ces.2011.05.026].

Réhimi F., Aloui F., Ben nasrallah S. (2011). Reorganization of coherent structures downstream a circular cylinder located between two parallel walls. Journal of Applied Fluid Mechanics, 4 (2), pp. 51-56. [IF=1.405] [DOI=10.36884/JAFM.4.02.11916].

Gheith R., Aloui F., Ben nasrallah S. (2011). Experimental study of a beta Stirling thermal machine type functioning in receiver and engine modes. Journal of Applied Fluid Mechanics, 4 (2), pp. 33-42. [IF=1.405] [DOI=0.36884/JAFM.4.02.11914].

Réhimi F., Aloui F. (2011). Synchronized analysis of an unsteady laminar flow downstream of a circular cylinder centred between two parallel walls using PIV and mass transfer probes. Experiments in fluids, 51 (1), pp. 1-22. [IF=2.48] [DOI=https://doi.org/10.1007/s00348-010-1005-y].

Koched A., Pavageau M., Aloui F. (2011). Experimental Investigations of Transfer Phenomena in a Confined Plane Turbulent Impinging Water Jet. Trans. of ASME, Journal of Fluids Engineering, 133 (6), pp. 061204. [IF=1.995] [DOI=https://doi.org/10.1115/1.4004090].

Loubière K., Pruvost J., Aloui F., Legrand J. (2011). Investigations in an external-loop airlift photobioreactor with annular light chambers and swirling flow. Chemical Engineering Research and Design, 89 (2), pp. 164-171. [IF=3.739] [DOI=https://doi.org/10.1016/j.cherd.2010.06.001].

Aloui F., Berrich E., Pierrat D. (2011). Experimental and numerical investigations of a turbulent flow behavior in isolated and nonisolated conical diffusers. Journal of Fluids Engineering, 133 (1), pp. 011201. [IF=1.995] [DOI=https://doi.org/10.1115/1.4003236].

Gheith R., Aloui F., Ben nasrallah S. (2011). Study of Beta type Stirling engine - Validity of the perfect gas assumption. International Journal of Heat and Technology, 29, pp. 157-164. [IF=2.8]

Mestiri R., Koched A., Aloui F. (2011). Experimental application of the electroaerodynamic actuator for airflow control. Science Academy Transactions on Renewable Energy Systems Engineering and Technology (SATRESET), 1, pp. 124-128

Réhimi F., Aloui F., Ben nasrallah S., Doubliez L., Legrand J. (2009). Experimental investigation of a confined flow downstream of a circular cylinder centred between two parallel walls. Journal of Fluids and structures, 24 (6), pp. 855-882. [IF=2.917] [DOI=https://doi.org/10.1016/j.jfluidstructs.2007.12.011].

Réhimi F., Legrand J., Aloui F. (2008). Electrochemical method for precise determination of wall shear rate. Russian Journal of Electrochemistry, 44 (4), pp. 434-444. [IF=1.078] [DOI=https://doi.org/10.1134/S1023193508040095].

Aloui F., Madani S. (2008). Experimental investigation of a wet foam flow through a horizontal sudden expansion. Experimental Thermal and Fluid Science. [IF=3.232] [DOI=https://doi.org/10.1016/j.expthermflusci.2007.11.013].

Aloui F., Réhimi F., Dumont E., Legrand J. (2008). Inverse method applied for the determination of the wall shear rate in a scraped surface heat exchanger using the electrochemical technique. International Journal of Electrochemical Science, 3 (5), pp. 676-690. [IF=1.73]

Aloui F., Madani S. (2007). Wet foam flow under a fence located in the middle of a horizontal duct of square section. Colloids and Surfaces A: Physicochemical and Engineering Aspects. [IF=4.539] [DOI=https://doi.org/10.1016/j.colsurfa.2007.01.009].

Réhimi F., Aloui F., Ben nasrallah S., Doubliez L., Legrand J. (2006). Inverse method for electrodiffusional diagnostics of flows. International Journal of Heat and Mass Transfer, 49 (7), pp. 1242-1254. [IF=5.584] [DOI=https://doi.org/10.1016/j.ijheatmasstransfer.2005.10.008].

Tisné P., Doubliez L., Aloui F. (2004). Determination of the slip layer thickness for a wet foam flow. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 246 (1), pp. 21-29. [IF=4.539] [DOI=https://doi.org/10.1016/j.colsurfa.2004.07.014].

Tisné P., Aloui F., Doubliez L. (2003). Analysis of wall shear stress in wet foam flows using the electrochemical method. International Journal of Multiphase Flow, 29 (5), pp. 841-854. [IF=3.186] [DOI=https://doi.org/10.1016/S0301-9322(03)00038-7].

Aloui F., Souhar M. (2000). Experimental study of turbulent asymmetric flow in a flat duct symmetric sudden expansion. Journal of Fluids Engineering, 122 (1), pp. 174-177. [IF=1.995] [DOI=https://doi.org/10.1115/1.483245].

Aloui F., Doubliez L., Legrand J., Souhar M. (1999). Bubbly flow in an axisymmetric sudden expansion: Pressure drop, void fraction, wall shear stress, bubble velocities and sizes. Experimental Thermal and Fluid Science, 19 (2), pp. 118-130. [IF=3.232] [DOI=https://doi.org/10.1016/S0894-1777(98)10017-1].

Aloui F., Souhar M. (1996). Experimental study of a two-phase bubbly flow in a flat duct symmetric sudden expansion - Part II: Liquid and bubble velocities, bubble sizes. International Journal of Multiphase Flow, 22 (5), pp. 849-861. [IF=3.186] [DOI=https://doi.org/10.1016/0301-9322(96)00026-2].

Aloui F., Souhar M. (1996). Experimental study of a two-phase bubbly flow in a flat duct symmetric sudden expansion - Part 1: Visualization, pressure and void fraction. International Journal of Multiphase Flow, 22 (4), pp. 651-665. [IF=3.186] [DOI=https://doi.org/10.1016/0301-9322(96)00021-3].

Aloui F., Souhar M. (1994). Etude de la chute de pression singulière dans les élargissements brusques en écoulement monophasique turbulent. Journal of Applied Mathematics and Physics (Zeitschrift für Angewandte Mathematik und Physik, ZAMP), 45, pp. 371–386. [IF=1.934] [DOI=https://doi.org/10.1007/BF00945926].

Revue nationale avec comité de lecture

Charmiyan M., Azimian A., Shirani E., Aloui F. (2017). Investigation of turbulent slot impinging jet using laser doppler anemometry method - Experimental research and error analysis. Modares Mechanical Engineering, 17 (4), pp. 92-100 [DOI=20.1001.1.10275940.1396.17.4.38.4].

El ouederni A.-R., Ben salah M., Askri F., Ben nasrallah S., Aloui F. (2009). Experimental study of a parabolic solar concentrator. Revue des Energies Renouvelables, 12 (3), pp. 395-404 [DOI=https://www.asjp.cerist.dz/en/article/119669].

Ouvrage

Aloui F., Varuvel E., Sonthalia A. (2023). Handbook of Thermal Management Systems: e-Mobility and Other Energy Applications, , 1200 pages, 1st Edition - August 1, 2023. Elsevier Inc., Cambridge (MA), USA, ISBN 9780443190179 [DOI=https://www.elsevier.com/books/handbook-of-thermal-management-systems/aloui/978-0-443-19017-9].

Varuvel E., Aloui F. (2022). Energy and Exergy for Sustainable and Clean Environment, , Volume 2, 546 pages, 35 Chapters. Springer Nature, 1st Edition 2022, Singapore, ISBN 978-981-16-8273-5 / 978-981-16-8274-2 (https://link.springer.com/book/9789811682735) [DOI=https://doi.org/10.1007/978-981-16-8274-2].

Varuvel E., Aloui F. (2022). Energy and Exergy for Sustainable and Clean Environment, , Volume 1, IX and 646 pages, 46 Chapters. Springer Nature, 1st Edition 2022, Singapore, ISBN 978-981-16-8277-3 / 978-981-16-8278-0 (https://link.springer.com/book/10.1007/978-981-16-8278-0) [DOI=https://doi.org/10.1007/978-981-16-8278-0].

Aloui F., Varuvel E. (2021). International Journal of Energy Research - Special issue: Environmentally friendly energy solutions, , 45 (Issue 12), pp. 17023-18304, [IF=4.6], John Wiley & Sons, USA, ISBN 1099-114X. [IF=4.6] [DOI=https://doi.org/10.1002/er.6172].

Aloui F., Dincer I. (2018). Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, , Volume 1, pp. 1-683, 43 book chapters (https://www.springer.com/us/book/9783319625713). Springer Nature, New York, USA, https://link.springer.com/content/pdf/bfm%3A978-3-319-62572-0%2F1.pdf, ISBN 978-3-319-62572-0 [DOI=https://doi.org/10.1007/978-3-319-62572-0].

Aloui F., Dincer I. (2018). Exergy for A Better Environment and Improved Sustainability 2: Applications, , Volume 1, pp. 1-700, 48 book chapters (https://www.springer.com/us/book/9783319625744). Springer Nature, New York, USA, https://link.springer.com/content/pdf/bfm%3A978-3-319-62575-1%2F1.pdf, ISBN 978-3-319-62575-1 [DOI=10.1007/978-3-319-62575-1].

Aloui F., Dincer I. (2018). Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, , Volume 2, pp. 687-1469, 49 book chapters (https://www.springer.com/us/book/9783319625713). Springer Nature, New York, USA, https://link.springer.com/content/pdf/bfm%3A978-3-319-62572-0%2F1.pdf, ISBN 978-3-319-62572-0 [DOI=https://doi.org/10.1007/978-3-319-62572-0].

Aloui F., Dincer I. (2018). Exergy for A Better Environment and Improved Sustainability 2: Applications, , Volume 2, pp. 703-1203, 35 book chapters (https://www.springer.com/us/book/9783319625744). Springer Nature, New York, USA, https://link.springer.com/content/pdf/bfm%3A978-3-319-62575-1%2F1.pdf, ISBN 978-3-319-62575-1 [DOI=10.1007/978-3-319-62575-1].

Aloui F., Ben nasrallah S. (2010). Proceedings of the First International Conference on Energy Conversion and Conservation, CICME'08, , 580 pages, 98 book chapters. Presse Universitaire de l'Université de Nantes, ISBN 9782869392304 [DOI=http://ark.bnf.fr/ark:/12148/cb16254983b].

Chapitre d'ouvrage

Hachem H., Gheith R., Aloui F. (2023). Waste-heat driven Stirling engine systems: Conception and Parameters. In Fethi Aloui, V. Edwin Geo and Ankit Sonthalia, Handbook on Thermal Management Systems: e-mobility and other applications, Elsevier Inc., Cambridge (MA), USA, pp. 747-767, ISBN 978-0-443-19017-9 [DOI=https://doi.org/10.1016/B978-0-443-19017-9.00035-0].

Soltani I., Berrich E., Romdhane M., Aloui F. (2023). Thermal and catalytic pyrolysis of date palm stones: Production, characterization of pyrolytic oil and study of performance and emission characteristics in CI engine. In Fethi Aloui, V. Edwin Geo and Ankit Sonthalia, Handbook on Thermal Management Systems: e-mobility and other applications, Elsevier Inc., Cambridge (MA), USA, pp. 769-784, ISBN 978-0-443-19017-9 [DOI=https://doi.org/10.1016/B978-0-443-19017-9.00013-1].

Salhi M., Berrich E., Romdhane M., Aloui F. (2023). Experimental Investigation of Performance and Exhaust Emissions of Pyrolytic Olive Pomaces biofuels blends without and with additives fuelled Internal Combustion Engine. In Fethi Aloui, V. Edwin Geo and Ankit Sonthalia, Handbook on Thermal Management Systems: e-mobility and other applications, Elsevier Inc., Cambridge (MA), USA, pp. 785-800, ISBN 978-0-443-19017-9 [DOI=https://doi.org/10.1016/B978-0-443-19017-9.00031-3].

Varuvel E., Sonthalia A., Aloui F., Saravanan C. (2023). Basics of heat transfer: Conduction. In Fethi Aloui, V. Edwin Geo and Ankit Sonthalia, Handbook on Thermal Management Systems: e-mobility and other applications, Elsevier Inc., Cambridge (MA), USA, pp. 1-33, ISBN 978-0-443-19017-9 [DOI=https://doi.org/10.1016/B978-0-443-19017-9.00003-9].

Varuvel E., Sonthalia A., Aloui F., Saravanan C. (2023). Basics of heat transfer: Convection. In Fethi Aloui, V. Edwin Geo and Ankit Sonthalia, Handbook on Thermal Management Systems: e-mobility and other applications, Elsevier Inc., Cambridge (MA), USA, pp. 35-77, ISBN 978-0-443-19017-9 [DOI=https://doi.org/10.1016/B978-0-443-19017-9.00033-7].

Varuvel E., Sonthalia A., Aloui F., Saravanan C. (2023). Basics of heat transfer: Heat exchanger. In Fethi Aloui, V. Edwin Geo and Ankit Sonthalia, Handbook on Thermal Management Systems: e-mobility and other applications, Elsevier Inc., Cambridge (MA), USA, pp. 79-93, ISBN 978-0-443-19017-9 [DOI=https://doi.org/10.1016/B978-0-443-19017-9.00016-7].

Sonthalia A., Varuvel E., Aloui F., Saravanan C. (2023). Need of battery thermal management systems. In Fethi Aloui, V. Edwin Geo and Ankit Sonthalia, Handbook on Thermal Management Systems: e-mobility and other applications, Elsevier Inc., Cambridge (MA), USA, pp. 141-155, ISBN 978-0-443-19017-9 [DOI=https://doi.org/10.1016/B978-0-443-19017-9.00002-7].

Rejeb H., Berrich-Betouche E., Hachemi M., Aloui F. (2022). Energy and Exergy for Sustainable and Clean Environment. In V. Edwin Geo and Fethi Aloui, Kinetic Study Of Waste Tires Pyrolysis By Thermogravimetric Analysis Kissinger-Akahira-Sunose (KAS) Method, Volume 1, 646 pages, Springer Nature, 1st Edition 2022, Singapore, pp. 589-599, ISBN 9789811682735 [DOI=https://doi.org/10.1007/978-981-16-8278-0_38].

Levieux G., Elawady A., Aloui F. (2022). Energy and Exergy for Sustainable and Clean Environment. In V. Edwin Geo and Fethi Aloui, 2D numerical simulation of downburst simulator in the Wall of Wind, Volume 1, 490 pages, Springer Nature, 1st Edition 2022, Singapore, pp. In Press, ISBN 9789811682771 [DOI=In progress].

Bentorki M., Chen J., Aloui F. (2022). Energy and Exergy for Sustainable and Clean Environment. In V. Edwin Geo and Fethi Aloui, Impact of Heat Integration from CO2 Compression on Energy Requirement and Equipment Costs in Power Plants Using Post Combustion Capture, Volume 1, 490 pages, Springer Nature, 1st Edition 2022, Singapore, pp. In Press, ISBN 9811682771 [DOI=In progress].

Mehrez I., Gheith R., Aloui F. (2022). Energy and Exergy for Sustainable and Clean Environment. In V. Edwin Geo and Fethi Aloui, Lattice Boltzmann equation for axisymmetric swirling thermal flows between two concentric cylinders, Volume 1, 490 pages, Springer Nature, 1st Edition 2022, Singapore, pp. In Press, ISBN 9811682771 [DOI=In progress].

Chaabane R., Jemni A., Aloui F. (2022). Energy and Exergy for Sustainable and Clean Environment. In V. Edwin Geo and Fethi Aloui, An Efficient Lattice Boltzmann Model for 3D Transient Flows, Volume 2, 490 pages, Springer Nature, 1st Edition 2022, Singapore, pp. In Press, ISBN 9789811682735 [DOI=In progress].

Betouche E., Dhahak A., Touati A., Aloui F. (2018). Experimental Investigation of Polypropylene Pyrolysis for Fuel Production. In Fethi ALOUI and Ibrahm Dincer, Exergy for A Better Environment and Improved Sustainability 2 : Applications, Volume 1, Springer Nature, New York, USA, pp. 461-470, ISBN 978-3-319-62575-1 [DOI=https://doi.org/10.1007/978-3-319-62575-1_33].

Mrad N., Varuvel E., Aloui F., Tazerout M. (2018). Experimental Analysis of Biofuel and Undistilled Biofuel from Waste Fish Fat in Diesel Engine. In Fethi ALOUI and Ibrahm Dincer, Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, Volume 2, Springer Nature, New York, USA, pp. 1339-1359, ISBN 978-3-319-62572-0 [DOI=https://doi.org/10.1007/978-3-319-62572-0_86].

Berrich E., Aloui F., Legrand J. (2018). Radial Distribution of Mass Transfer and Wall Shear Instantaneous Rates in Couette-Taylor Flow. In Fethi ALOUI and Ibrahm Dincer, Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, Volume 1, Springer Nature, New York, USA, pp. 583-599, ISBN 978-3-319-62572-0 [DOI=https://doi.org/10.1007/978-3-319-62572-0_38].

Mehrez I., Gheith R., Aloui F., Ben nasrallah S. (2018). Numerical and Dynamic Study of Flow Instabilities and Heat Transfer at a Backward-Facing Step Using the Lattice Boltzmann Method. In Fethi ALOUI and Ibrahm Dincer, Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, Volume 1, Springer Nature, New York, USA, pp. 509-526, ISBN 978-3-319-62572-0 [DOI=https://doi.org/10.1007/978-3-319-62572-0_34].

Abassi W., Aloui F., Ben nasrallah S., Legrand J. (2018). Experimental Investigations of Taylor-Couette Flow Using PIV and Electrochemical Techniques. In Fethi ALOUI and Ibrahm Dincer, Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, Volume 1, Springer Nature, New York, USA, pp. 559-581, ISBN 978-3-319-62572-0 [DOI=https://doi.org/10.1007/978-3-319-62572-0_37].

Gheith R., Hachem H., Aloui F., Ben nasrallah S. (2018). Experimental and Theoretical Investigation of Flows Inside a Gamma Stirling Engine Regenerator. In Fethi ALOUI and Ibrahm Dincer, Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, Volume 1, Springer Nature, New York, USA, pp. 383-395, ISBN 978-3-319-62572-0 [DOI=https://doi.org/10.1007/978-3-319-62572-0_27].

Varuvel E., Mrad N., Tazerout M., Aloui F. (2018). Combustion Analysis of Biofuel Derived from Waste Fish Fat. In Fethi ALOUI and Ibrahm Dincer, Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, Volume 1, Springer Nature, pp. 1311-1328, ISBN 978-3-319-62572-0 [DOI=https://doi.org/10.1007/978-3-319-62572-0_84].

Hachem H., Gheith R., Aloui F., Ben nasrallah S., Wang M. (2018). A CFD Analysis of the Air Flow Through the Stirling Engine's Singularities. In Fethi ALOUI and Ibrahm Dincer, Exergy for A Better Environment and Improved Sustainability 1: Fundamentals, Volume 1, Springer Nature, New York, USA, pp. 271-287, ISBN 978-3-319-62572-0 [DOI=https://doi.org/10.1007/978-3-319-62572-0_19].

Gheith R., Hachem H., Aloui F., Ben nasrallah S. (2018). Stirling Engines. In Ibrahm Dincer, Comprehensive Energy Systems, Volume 4, Elsevier, 1st Edition, Oxford: Elsevier Inc., pp. 169-208, ISBN 9780128095973

Berrich E., Aloui F., Legrand J. (2018). Experimental investigations on oscillatory Couette-Taylor Flow wall shear stress behaviour using electrochemical technique: High modulation effect. In Fethi ALOUI and Ibrahm Dincer, Exergy for A Better Environment and Improved Sustainabilty 1: Fundamentals, Volume 1, Springer Nature, pp. 527-542, ISBN 978-3-319-62572-0 [DOI=https://doi.org/10.1007/978-3-319-62572-0_35].

Chovet R., Aloui F. (2015). Void Fraction Influence Over Aqueous Foam Flow: Wall Shear Stress and Core Shear Evolution. In Ibrahim Dincer et al., Progress in Clean Energy, Volume 1: Analysis and Modeling, Springer International Publishing, pp. 909-931, ISBN 978-3-319-16709-1 [DOI=https://doi.org/10.1007/978-3-319-16709-1_66].

Berrich E., Aloui F., Legrand J. (2015). Effect on Wall Shear Rates of Taylor Vortex Instabilities Induced by Progressive Variation of the Inner Cylinder. In Ibrahim Dincer et al., Progress in Clean Energy, Volume 1: Analysis and Modeling, Springer International Publishing, Switzerland, pp. 891-908, ISBN 978-3-319-16709-1 [DOI=https://doi.org/10.1007/978-3-319-16709-1_65].

Conférence internationale avec actes et comité de lecture

Mehrez I., Hachem H., Gheith R., Aloui F. (2023). Enhancement of heat transfer using nanofluids in High-efficiency vortex (HEV) multifunctional heat exchanger. The 14th International Renewable Energy Congress (IREC 2023), 16-18 December, https://irec-conference.com/, Sousse, Tunisia, décembre .

Mehrez I., Hachem H., Gheith R., Aloui F. (2023). Enhancing Stirling Engine Efficiency through Multi Sub-Regenerator Design: a Numerical Investigation using MVCEF Method. The 14th International Renewable Energy Congress (IREC 2023), Sousse, Tunisia, décembre .

Hachem H., Gheith R., Aloui F. (2023). Modeling of the exhaust gas-pressurized nitrogen exchanger equipped with a Stirling engine as a cogeneration device. The 14th International Renewable Energy Congress (IREC 2023), Sousse, Tunisia, décembre .

Solaani Z., Aloui F., Gheith R. (2023). Study of an internal combustion engine fueled partially with green hydrogen via the recovery of its exhaust gases. The 14th International Renewable Energy Congress (IREC 2023), Sousse, Tunisia, décembre .

Mehrez I., Hachem H., Gheith R., Aloui F. (2023). Numerical investigation of a nanofluid of a Stirling engine's cooling circuit. ASME-JSME-KSME Joint Fluids Engineering Conference 2023, Osaka, JAPAN (https://ajk2023-fed.org/submission.html), juillet .

Gaied L., Berrich E., Aloui F. (2023). Experimental study of flow instabilities in a turbulent Taylor-Couette flow with a wavy inner cylinder surface. ASME-JSME-KSME Joint Fluids Engineering Conference 2023, AJK FED2023, Osaka, JAPAN (https://ajk2023-fed.org/submission.html), juillet .

Hachem H., Gheith R., Aloui F. (2022). Simulation of flow and heat transfer inside the Double acting Stirling engine. 10ème Conférence Internationale des Energies Renouvelables (CIER-2022), Hammamet, Tunisia, décembre . [DOI=https://www.conf-event.com/CIER/images/CIER-2022.pdf].

Mehrez I., Hachem H., Gheith R., Aloui F. (2022). Numerical investigation of a nanofluid of a Stirling engine's cooling circuit using the Lattice Boltzmann Method (LBM). 10ème Conférence Internationale des Energies Renouvelables (CIER-2022), Hammamet, Tunisia, décembre . [DOI=https://www.conf-event.com/CIER/images/CIER-2022.pdf].

Marzougui I., Gheith R., Hachem H., Aloui F. (2022). Numerical investigation of a waste heat recovery unit using double acting Stirling engine technology. Advanced Materials and Green Energy Conference (AMGEC-2022), Sousse, Tunisia, novembre . [DOI=http://amgec-crten.com/en/home].

Gaied L., Berrich E., Aloui F. (2022). Study of Couette-Taylor-Poiseuille Flow With a Wavy Internal Cylinder Surface at Low Taylor and Axial Reynolds Numbers. ASME FEDSM Fluids Engineering Division Summer Meeting, 1, ASME Digital Collection, Toronto, Ontario, Canada, pp. V001T02A007, août ., ISBN 978-0-7918-8583-3 [DOI=https://doi.org/10.1115/FEDSM2022-87569].

Marzougui I., Gheith R., Hachem H., Aloui F. (2022). Evaluation of Flow and Heat Transfer During Compression Stroke in a Porous Material Using MVCEF Solving Method. ASME FEDSM Fluids Engineering Division Summer Meeting, 2, ASME Digital Collection, Toronto, Ontario, Canada, pp. V002T05A012, août ., ISBN 978-0-7918-8584-0 [DOI=https://doi.org/10.1115/FEDSM2022-86938].

Gaied L., Aloui F., Keirsbulck L. (2022). Experimental study of the effect of a wavy surface in Taylor-Couette-Poiseuille flow. 9th EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS), Lille, France, juin . [DOI=https://eucass-3af-2022.eu/].

Mehrez I., Gheith R., Aloui F. (2022). Energy transfer in turbulence using Lattice Boltzmann Method based on large-eddy simulation. , Lille, France, juin . [DOI=https://eucass-3af-2022.eu/].

Aloui F. (2021). Energetic optimization of Stirling engines for the valorization of exhaust gas issued from ICE and its use in transport and sustainable energy. THNS 2021 (Virtual FORUM): 14th THNS Forum “Exploring Resilient City and Transport”, Tongji University, Shanghai, China, octobre .

Chaabane R., Jemni A., Aloui F. (2021). Transient Rayleigh-Bénard Thermal Convection With Radiation Heat Transfer in Participating Media Using the Control Volume Finite Element Method (CVFEM) and Lattice Boltzmann Method. ASME 2021 Fluids Engineering Division Summer Meeting, August 10–12, 2021, Volume 1: Aerospace Engineering Division Joint Track; Computational Fluid Dynamics, ASME Digital Collection, Virtual, Online, pp. V001T02A019, octobre ., ISBN 978-0-7918-8528-4 [DOI=https://doi.org/10.1115/FEDSM2021-65629].

Gaied L., Berrich E., Lippert M., Keirsbulck L., Aloui F. (2021). Experimental Investigations on the Effect of a Wavy Surface on Hydrodynamic Instabilities in a Taylor-Couette System. ASME 2021 Fluids Engineering Division Summer Meeting, August 10–12, 2021, Volume 2: Fluid Applications and Systems; Fluid Measurement and Instrumentation, ASME Digital Collection, Virtual, Online, pp. FEDSM2021-65631, V002T04A016; 9 pages, octobre ., ISBN 978-0-7918-8529-1 [DOI=https://doi.org/10.1115/FEDSM2021-65631].

Mahmoudirad S., Shirani E., Aloui F. (2021). Structural Analysis of Couette-Taylor Flow With Periodic Oscillation of the Inner Cylinder in Different Flow Regimes. ASME 2021 Fluids Engineering Division Summer Meeting, August 10–12, 2021, Volume 3: Fluid Mechanics; Micro and Nano Fluid Dynamics; Multiphase Flow, ASME Digital Collection, Virtual, Online, pp. Paper No: FEDSM2021-65626, V003T05A032; 8 pages, octobre ., ISBN 978-0-7918-8530-7 [DOI=https://doi.org/10.1115/FEDSM2021-65626].

Hachem H., Gheith R., Aloui F. (2021). Numerical Investigating of Oscillatory Flow and Heat Transfer Through Stirling Regenerator. ASME 2021 Fluids Engineering Division Summer Meeting, August 10–12, 2021, Volume 1: Aerospace Engineering Division Joint Track; Computational Fluid Dynamics, ASME Digital Collection, Virtual, Online, pp. FEDSM2021-65624, V001T02A006; 11 pages, janvier ., ISBN 978-0-7918-8528-4 [DOI=https://doi.org/10.1115/FEDSM2021-65624].

Shirani E., Nasirzade S., Aloui F. (2021). Elementary Numerical Analysis of Wet Foam Formation and Study of Its Flow Structures and Physical Behavior. ASME 2021 Fluids Engineering Division Summer Meeting, August 10–12, 2021, Volume 3: Fluid Mechanics; Micro and Nano Fluid Dynamics; Multiphase Flow, ASME Digital Collection, Virtual, Online, pp. FEDSM2021-65627, V003T08A011; 12 pages, janvier ., ISBN 978-0-7918-8530-7 [DOI=https://doi.org/10.1115/FEDSM2021-65627].

Varuvel E., Thiyagarajan S., Stanley M., Aloui F. (2020). Experimental study on use of carbon free gaseous fuel (hydrogen) with biodiesel and carbon capture system in CI engine to reduce CO2 emission. 12th International Exergy, Energy and Environment Symposium (IEEES-12), Virtual Conference, Doha, Qatar, décembre .

Hahn T., Chen J., Aloui F. (2020). Model and Flow Sheet Improvements for Coal fired Power Plants Equipped with a CO2 Capture Process Using Monoethanolamine. 12th International Exergy, Energy and Environment Symposium (IEEES-12), Virtual Conference, Doha, Qatar, décembre .

Hachem H., Gheith R., Aloui F. (2020). Theoretical investigations of Stirling engine performances for different working fluids. 12th International Exergy, Energy and Environment Symposium (IEEES-12), Virtual Conference, Doha, Qatar, décembre .

Mehrez I., Gheith R., Aloui F. (2020). Spectral analysis of LBM-LES numerical data on lid-driven cavity. 12th International Exergy, Energy and Environment Symposium (IEEES-12), Virtual Conference, Doha, Qatar, décembre .

Bouazizi A., Berrich E., Bekri I., Aloui F., Srasra E. (2020). Heating rate effect on Tetra pak paper pyrolysis: Thermogravimetric analysis. 12th International Exergy, Energy and Environment Symposium (IEEES-12), Virtual Conference, Doha, Qatar, décembre .

Aloui F., Elawady A. (2020). Experimental and Numerical Investigations of Unsteady Flows Downstream Confined Rectangular Obstacles. ASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, Volume 1: Fluid Applications and Systems; Fluid Measurement and Instrumentation, ASME Digital Collection, Virtual, Online, pp. Paper No: FEDSM2020-20322, V001T02A002; 13 pages, octobre ., ISBN 978-0-7918-8371-6 [DOI=https://doi.org/10.1115/FEDSM2020-20322].

Gaied L., Aloui F., Lippert M., Berrich E. (2020). Experimental Investigations of the Surface Groove Effect in Taylor-Couette-Poiseuille Flow. ASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, Volume 1: Fluid Applications and Systems; Fluid Measurement and Instrumentation, ASME Digital Collection, Virtual, Online, pp. Paper No: FEDSM2020-20326, V001T02A009; 7 pages, octobre ., ISBN 978-0-7918-8371-6 [DOI=https://doi.org/10.1115/FEDSM2020-20326].

Mehrez I., Gheith R., Aloui F. (2020). Lattice Boltzmann Method Based on Large-Eddy Simulation (LES) Used to Investigate the Unsteady Turbulent Flow on Series of Cavities. ASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, Volume 2: Fluid Mechanics; Multiphase Flows, ASME Digital Collection, Virtual, Online, pp. Paper No: FEDSM2020-20329, V002T03A051; 8 pages, octobre ., ISBN 978-0-7918-8372-3 [DOI=https://doi.org/10.1115/FEDSM2020-20329].

Aloui F., Elawady A., J. hammad K. (2019). PIV and POD Investigations of Coherent Vortices Downstream Circular or Rectangular Obstacles Located Between Two Parallel Plates. ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, Volume 1: Fluid Mechanics, ASME Digital Collection, July 28–August 1, 2019 San Francisco, California, USA, pp. Paper No: AJKFluids2019-4651, V001T01A082; 12 pages, novembre ., ISBN 978-0-7918-5902-5 [DOI=https://doi.org/10.1115/AJKFluids2019-4651].

Gaied L., Aloui F., Lippert M., Keirsbulck L., Bigerelle M. (2019). Influence of Surface Irregularities on Hydrodynamic Instabilities in Couette-Taylor Flow. ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, Volume 1: Fluid Mechanics, ASME Digital Collection, July 28–August 1, 2019 San Francisco, California, USA, pp. Paper No: AJKFluids2019-4625, V001T01A081; 10 pages, novembre ., ISBN 978-0-7918-5902-5 [DOI=https://doi.org/10.1115/AJKFluids2019-4625].

Dallagi H., Al saabi A., Faille C., Benezech T., Augustin W., Aloui F. (2019). CFD Simulations of the Rheological Behavior of Aqueous Foam Flow Through a Half-Sudden Expansion. ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, Volume 1: Fluid Mechanics, ASME Digital Collection, July 28–August 1, 2019 San Francisco, California, USA, pp. Paper No: AJKFluids2019-4650, V001T01A030; 10 pages, novembre ., ISBN 978-0-7918-5902-5 [DOI=https://doi.org/10.1115/AJKFluids2019-4650].

Chaabane R., Jemni A., Aloui F. (2019). An Efficient Lattice Boltzmann Model for 3D Transient Flows. 11th International Exergy, Energy and Environment Symposium (IEEES), SRM-IST, 14-18 July, 2019, Kattankulathur, Tamil Nadu, India, juillet .

Bentorki M., Chen J., Aloui F. (2019). Impact of Heat Integration from CO2 Compression on Energy Requirement and Equipment Costs in Power Plants Using Post Combustion Capture. 11th International Exergy, Energy and Environment Symposium (IEEES), SRM-IST, india, juillet .

Rejeb H., Berrich-Betouche E., Hachemi M., Aloui F. (2019). Kinetic Study Of Waste Tires Pyrolysis By Thermogravimetric Analysis Kissinger-Akahira-Sunose (KAS) Method. 11th International Exergy, Energy and Environment Symposium (IEEES), SRM-IST, india, juillet .

Gheith R., Hachem H., Aloui F. (2019). CFD Simulation of heat transfer and flow inside 1kW Double-acting Stirling Engine. 6th International Conference on Green Energy and Environmental Engineering GEEE-2019, tunisia, avril .

Levieux G., Elawady A., Aloui F. (2019). 2D numerical simulation of downburst simulator in the Wall of Wind. 11th International Exergy, Energy and Environment Symposium (IEEES), SRM-IST, 14-18 July, india, janvier .

Dallagi H., Gheith R., Al saabi A., Faille C., Augustin W., Benezech T., Aloui F. (2018). CFD Characterization of a Wet Foam Flow Rheological Behavior. 5th Joint US‐European Fluids Engineering Summer Conference FEDSM18, Jul 15 - 20, Canada, juillet .

Aloui F. (2018). Lattice Boltzmann model for incompressible axisymmetric thermal flows. 5th Joint US‐European Fluids Engineering Summer Conference FEDSM18, Jul 15 - 20, canada, juillet .

Aloui F. (2018). Theoretical modeling of a Stirling thermal machine performances for different working gas fluids. 5th Joint US‐European Fluids Engineering Summer Conference FEDSM18, Jul 15 - 20, juillet .

Al saabi A., Aloui F., Faille C., Wauquier L., Lemy C., Dallagi H., Benezech T. (2018). Flowing foam for the removal of B. subtilis and B. cereus spores from stainless steel surfaces. Fouling and cleaning in food processing, Suéde, avril .

Hachem H., Gheith R., Ben nasrallah S., Aloui F. (2017). Entropy generation for oscillatory flow inside thermal-lag type Stirling engine: numerical analysis. Proc. ASME. 58042; Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics, Pumping Machinery, V01AT04A001, Waikoloa, Hawaii (USA), juillet ., ISBN 978-0-7918-5804-2 [DOI=10.1115/FEDSM2017-69010].

Berrich E., Dhahak A., Touati A., Aloui F. (2017). Fuel production from thermoplastic wastes pyrolysis. Proc. ASME. 58066; Volume 1C, Symposia: Gas-Liquid Two-Phase Flows; Gas and Liquid-Solid Two-Phase Flows; Numerical Methods for Multiphase Flow; Turbulent Flows: Issues and Perspectives; Flow Applications in Aerospace; Fluid Power; Bio-Inspired Fluid Mech, Waikoloa, Hawaii (USA), juillet ., ISBN 978-0-7918-5806-6 [DOI=10.1115/FEDSM2017-69086].

Monfared M., Gaied L., Berrich E., Shirani E., Bigerelle M., Aloui F. (2017). Experimental Study on the Effects of Surface Roughness on the Hydrodynamic instabilities' behaviors of Couette-Taylor flow. Proc. ASME. 58059; Volume 1B, Symposia: Fluid Measurement and Instrumentation; Fluid Dynamics of Wind Energy; Renewable and Sustainable Energy Conversion; Energy and Process Engineering; Microfluidics and Nanofluidics; Development and Applications in Comp, Waikoloa, Hawaii (USA), juillet ., ISBN 978-0-7918-5805-9 [DOI=10.1115/FEDSM2017-69252].

Charmiyan M., Azimian A., Shirani E., Aloui F. (2017). Capability assessment of five different RANS-based turbulence models to simulate the various regions of slot turbulent impingement jet flow. ASME Digital Collection, Proc. ASME. 58059; Volume 1B, Symposia: Fluid Measurement and Instrumentation; Fluid Dynamics of Wind Energy; Renewable and Sustainable Energy Conversion; Energy and Process Engineering; Microfluidics and Nanofluidics, Waikoloa, Hawaii (USA), juillet ., ISBN 978-0-7918-5805-9 [DOI=10.1115/FEDSM2017-69203].

Mehrez I., Gheith R., Aloui F., Ben nasrallah S. (2016). Numerical Analysis of Flow and Heat Transfer at a Backward-Facing Step With an Obstacle Based on Lattice Boltzmann Method. ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, juillet ., ISBN 978-0-7918-5028-2 [DOI=10.1115/FEDSM2016-7915.].

Gheith R., Hachem H., Zahi N., Aloui F., Ben nasrallah S. (2016). Convective Flow and Heat Transfer Inside a Beta Type Stirling Engine Based on Control Volume Finite Element Method. ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, juillet ., ISBN 978-0-7918-5029-9 [DOI=10.1115/FEDSM2016-7911].

Hachem H., Gheith R., Aloui F., Ben nasrallah S. (2016). Experimental Study of the Operation Conditions of Stability on a Gamma Stirling Engine. ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, juillet ., ISBN 978-0-7918-5029-9 [DOI=10.1115/FEDSM2016-7912].

Berrich E., Aloui F., Legrand J. (2016). Experimental Investigations of Couette-Taylor-Poiseuille Flows Using the Electro-Diffusional Technique. ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, Washington DC (USA), juillet ., ISBN 978-0-7918-5028-2 [DOI=10.1115/FEDSM2016-7918].

Cornu D., Keirsbulck L., Lippert M., Chovet R., Graziani A., Kerhervé F., Aloui F. (2016). Dynamical behavior over an asymmetrical deep cavity at high Reynolds numbers. RAILWAYS, Cagliari (Italy), avril .

Cornu D., Keirsbulck L., Chovet C., Kerhervé F., Aloui F. (2015). On the vortex dynamic of shear-driven deep cavity with asymmetrical walls. 4th International conference on turbulence and interaction, Corsica, novembre .

Chovet R., Aloui F., Keirsbulck L. (2015). Wall Shear Stress Generated by Aqueous Flowing Foam. ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, Seoul, juillet ., ISBN 978-0-7918-5721-2 [DOI=10.1115/AJKFluids2015-14039].

Gheith R., Aloui F., Ben nasrallah S. (2015). Investigation of Regenerator Matrix Through Figure of Merit Analysis. ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, Seoul (South Korea), juillet ., ISBN 978-0-7918-5721-2 [DOI=10.1115/AJKFluids2015-22087].

Berrich E., Aloui F., Legrand J. (2015). PIV Investigation of Couette-Taylor Flows With Axial Flows. ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, Seoul (South Korea), juillet ., ISBN 978-0-7918-5721-2 [DOI=10.1115/AJKFluids2015-14086].

Hachem H., Gheith R., Ben nasrallah S., Aloui F. (2015). Impact of Operating Parameters on Beta Type Regenerative Stirling Machine Performances. ASME/JSME/KSME 2015 Joint Fluids Engineering Conference, Seoul (South Korea), juillet ., ISBN 978-0-7918-5721-2 [DOI=10.1115/AJKFluids2015-22088].

Fadla F., Keirsbulck L., Aloui F., Laval J.-P. (2014). Experimental Characterization of the Separate Flow Induced by a Wall-Mounted Bump. ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Chicago (USA), août ., ISBN 978-0-7918-4622-3 [DOI=10.1115/FEDSM2014-21136].

Abassi W., Aloui F., Ben nasrallah S., Keirsbulck L., Legrand J. (2014). Flow Behaviour Around Square and Circular Obstacles in 2D and 3D Configurations Using Lattice Boltzmann Method. ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Chicago (USA), août ., ISBN 978-0-7918-4622-3 [DOI=10.1115/FEDSM2014-21211].

Gheith R., Aloui F., Ben nasrallah S. (2014). Evaluation of the Gamma Stirling Engine Heat Transfers in its Heat Exchangers. ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Chicago, USA, août ., ISBN 978-0-7918-4623-0 [DOI=10.1115/FEDSM2014-21189].

Chovet R., Aloui F., Keirsbulck L. (2014). Gas-Liquid Foam Through Straight Ducts and Singularities: CFD Simulations and Experiments. ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Chicago (USA), janvier ., ISBN 978-0-7918-4622-3 [DOI=10.1115/FEDSM2014-21190].

Gheith R., Aloui F., Ben nasrallah S. (2013). Experimental Study of Heat Transfer Inside a Gamma Stirling Engine Regenerator During Quasi-Steady Operation. ASME 2013 Fluids Engineering Division Summer Meeting, 1C, pp. V01CT26A002, juillet ., ISBN 978-0-7918-5556-0 [DOI=10.1115/FEDSM2013-16311].

Mrad N., Aloui F., Tazerout M. (2013). Upgrade of Corrosiveness Nature of Fish Waste Bio-Oil Using a Hybrid Catalyst (MgO/Na2CO3) Optimization Process. ASME 2013 Fluids Engineering Division Summer Meeting, 1C, pp. V01CT26A003, juillet ., ISBN 978-0-7918-5556-0 [DOI=10.1115/FEDSM2013-16391].

Mrad N., Paraschiv M., Aloui F., Tazerout M. (2011). Production of Liquid Hydrocarbon Fuel by Catalytic Cracking of Waste Fish Fat in Continuous Pilot System. ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, 1, pp. 3567-3572, juillet ., ISBN 978-0-7918-4440-3 [DOI=10.1115/AJK2011-17012].

Conférence nationale avec actes et comité de lecture

Gheith R., Frikha M., Hachem H., Aloui F., Ben nasrallah S. (2017). Simulation CFD des échangeurs de chaleur dans un moteur Stirling à Double effet. Journées Internationales de la Thermique, Monastir (Tunisie), octobre .

Aloui F., Gaied L., Abassi W., Lippert M., Bigerelle M. (2017). Measurement of thin liquid film thickness between two mechanical surfaces in relative movement using the conductimetry technique: Application for hydrodynamic lubrication. 23ème Congrès Français de Mécanique Lille, pp. 9 pages, août .

Gaied L., Berrich-Betouche E., Bigerelle M., Aloui F. (2017). Experimental study of the wall surfaces' roughness influence on the hydrodynamics' instabilities in a Couette-Taylor flow. 23ème Congrès Français de Mécanique Lille, pp. 9 pages, août .

Cornu D., Keirsbulck L., Kerhervé F., Aloui F., Lippert M. (2017). Caractérisation des écoulements de cavité asymétriques. Congrès Français de Mécanique 2017, Lille, août .