Publications

• Article dans une revue

Relationship between brightness and roughness of polypropylene abraded surfaces

Adrien van Gorp, Maxence Bigerelle, Denis Najjar

This article proposes to analyze the relation between gloss and roughness of surfaces of polypropylene samples abraded at different magnitudes. Experiments consist of mechanical polishing at different grades, roughness profiles measurement, and specular light reflectometry with three incidence…

Polymer Engineering and Science, 2016, 56 (1), pp.103 - 117. ⟨10.1002/pen.24197⟩. ⟨hal-01714922⟩

• Communication dans un congrès

A framework for supporting the choice of usability evaluation methods for interactive adaptive systems

Amira Dhouib, Neji Mahmoud, Abdelwaheb Trabelsi, Christophe Kolski

The evaluation of interactive adaptive systems is considered as a difficult endeavour due to the complex nature of these systems. Issues arise in the need to identify, for a given evaluation situation the set of suitable usability evaluation methods to be used by the evaluators. This paper…

15th International Conference on Intelligent Systems Design and Applications (ISDA) 2015, Institute of Electrical and Electronics Engineers (IEEE), Dec 2015, Marrakech, Morocco. pp.289-294. ⟨hal-03350603⟩

• Ouvrages

Special issue: Information Systems in Transport Logistics, International Journal of Shipping and Transport Logistics

Mounir Benaissa, Mourad Abed

Inderscience Publishers, 2016, 1756-6517. ⟨hal-03388662⟩

• Communication dans un congrès

Classification et analyse des pistes de recherche relatives au CONWIP

Yann Jaegler, Patrick Burlat, Samir Lamouri, Damien Trentesaux

Les grands enjeux industriels actuels se traduisent par une demande de personnalisation des produits, de délais de livraison réduits, de taux de service en hausse et de systèmes productifs agiles. Ils élèvent le choix du système de contrôle de production au rang de sujet stratégique pour une usine…

Classification et analyse des pistes de recherche relatives au CONWIP . 11e Conférence Francophone d’Optimisation et Simulation- MOSIM’16 : « L’innovation technologique au service des systèmes : défis et opportunités», Aug 2016, Montréal, Canada. ⟨emse-01533191⟩

• Article dans une revue

Spatial Resolution Correction for Electrochemical Wall-shear Stress Measurements using Rectangular Sensors

Fawzi Fadla, Rogelio Chovet, Denis Cornu, Marc Lippert, Fethi Aloui, Laurent Keirsbulck

This article is mainly motivated by the growing needs for highly resolved measurements forwall-bounded turbulent flows and aims to proposes a spatial correction coefficient in order toincrease the wall-shear stress sensors accuracy. As it well known for the hot wire anemometry, thefluctuating…

Journal of Applied Fluid Mechanics, 2016, 9 (3), pp.1309-1319. ⟨10.18869/acadpub.jafm.68.228.23945⟩. ⟨hal-03448317⟩

• Article dans une revue

An approach to the prioritization of sustainable maintenance drivers in the TBL framework

Sandro de Paula Pires, Olivier Sénéchal, Eduardo Rocha Loures, José Fernando Jimenez

The current sustainable production model is supported by the Triple Bottom Line (TBL) concept and its three dimensions: economic, environmental, and social. This paper aims to propose an approach to identify and prioritize the attributes of the TBL dimensions, extracted from the Global Reporting…

IFAC-PapersOnLine, 2016, 49 (28), pp.150-155. ⟨10.1016/j.ifacol.2016.11.026⟩. ⟨hal-03670448⟩

• Article dans une revue

Hybrid DCT-DBT algorithm for medical video compression

Yassine Habchi, Mohammed Beladgham, Haouari Benlabbes, Abdelmalik Taleb-Ahmed

In this paper we present the effect of transform type in medical video compression. To obtain the maximal capabilities of storage and transmission, different compression algorithms should be compared to find the optimal technique for medical video compression. We use for compression three type of…

Electrotehnică, Electronică, Automatică, 2016, 64 (2), pp.97-103. ⟨hal-03669146⟩

• Rapport

Pistes d’amélioration d’un siège d’avion pour passager à mobilité réduite

François Gabrielli, Philippe Pudlo

[Rapport de recherche] LAMIH, Valenciennes. 2016. ⟨hal-03420631⟩

• Chapitre d'ouvrage

Measurements of dynamic properties of ballistic yarns using innovative testing devices

Caroline Chevalier, Christophe Kerisit, Andreas Klavzar, François Boussu, Daniel Coutellier

This chapter highlights the influence of the dynamic characteristic of yarn on the ballistic performance of fabric submitted to impact. A brief review of existing research works done on the dynamic tensile test known as the Hopkinson bar, and more recently the Split Flying Bar, is presented. A new…

Advanced Fibrous Composite Materials for Ballistic Protection, Elsevier, pp.199-215, 2016, 978-178242461-1. ⟨10.1016/B978-1-78242-461-1.00007-8⟩. ⟨hal-03667392⟩

• Article dans une revue

Scavenging Process Analysis in a 2-Stroke Engine by CFD Approach for a Parametric 0D Model Development

Stéphanie Cagin, Nachida Bourabaa, Eric Delacourt, Céline Morin, Xavier Fischer, Daniel Coutellier, Bertrand Carre, Sylvain Loumé

This paper presents a method to improve cylinder design of 2-stroke auto-ignition engine based on a CFD (Computational Fluid Dynamics) study of internal flows in the chamber and an unsteady global 0D parametric approach. In 2-stroke engine, scavenging process plays an important role regarding…

Journal of Applied Fluid Mechanics, 2016, 9 (1), pp.69-80. ⟨10.36884/jafm.9.SI1.26397⟩. ⟨hal-01330948⟩