Publications

• Article dans une revue

Smoothed finite element method implemented in a resultant eight-node solid-shell element for geometrical linear analysis

Xavier J-G Elie-Dit-Cosaque, Augustin Gakwaya, Hakim Naceur

A smoothed finite element method formulation for the resultant eight-node solid-shell element is presented in this paper for geometrical linear analysis. The smoothing process is successfully performed on the element mid-surface to deal with the membrane and bending effects of the stiffness matrix…

Computational Mechanics, 2015, 55 (1), pp.105-126. ⟨10.1007/s00466-014-1085-2⟩. ⟨hal-01348306⟩

• Article dans une revue

An innovative procedure for characterising a coupled elastoplastic damage model of behaviour using the Virtual Fields Method

Delphine Notta-Cuvier, Bertrand Langrand, Franck Lauro, Eric Markiewicz

The characterisation of material behaviour models can be challenging, especially when dealing with strongly non-linear constitutive laws. Classical procedures are restricted to the treatment of homogeneous mechanical fields. They can therefore not be applied after strain localisation and behaviour…

International Journal of Solids and Structures, 2015, 69-70, pp.415-427. ⟨10.1016/j.ijsolstr.2015.05.009⟩. ⟨hal-01232504⟩

• Article dans une revue

Robust Observer Design of Tire Forces in Heavy Duty Vehicles

Hocine Imine, Omar Khemoudj, Mohamed Djemai, Krishna Busawon

This paper presents a robust observer design methodology to estimate tire forces in heavy-duty vehicles. The proposed methodology uses low-cost sensors and observer-based numerical differentiators. In addition to the already available sensors, low-cost sensors from the CAN bus are employed to get…

IEEE Transactions on Intelligent Transportation Systems, 2015, 16 (6), pp.3304-3312. ⟨10.1109/TITS.2015.2443180⟩. ⟨hal-01215693⟩

• Article dans une revue

A Method to Compute Efficient 3d Helicopters Flight Trajectories Based on a Motion Polymorph-Primitives Algorithm

Konstanca Nikolajevic, Nicolas Belanger, David Duvivier, Rabie Ben Atitallah, Abdelhakim Artiba

Finding the optimal 3D path of an aerial vehicle under flight mechanics constraints is a major challenge, especially when the algorithm has to produce real time results in flight. Kinematics models and Pythagorian Hodograph curves have been widely used in mobile robotics to solve this problematic.…

International Journal of Computer, Electrical, Automation, Control and Information Engineering, 2015, 9 (8), pp.1931-1939. ⟨10.5281/zenodo.1338542⟩. ⟨hal-03402081⟩

• Communication dans un congrès

Towards a Quality model for the Evaluation of Mobile Decision support Systems

Emna Ben Ayed, Mounir Ben Ayed, Christophe Kolski, Houcine Ezzedine

The widespread use of wireless communications, Internet, and mobile technology offers the opportunity of supplying new generation of decision support commonly known as Mobile Decision Support Systems (MDSS). This paper describes research towards evaluation of such systems. Our view is that the end…

4th International Conference on Advanced Logistics and Transport (ICALT 2015), Institute of Electrical and Electronics Engineers (IEEE), May 2015, Valenciennes, France. pp.187-192, ⟨10.1109/ICAdLT.2015.7136617⟩. ⟨hal-03364135⟩

• Rapport

DataRush. Rapport final de la tâche 3 "Optimisation de tournées de véhicules avec collecte et livraison basée sur la prédiction

Amine Alalou, Said Hanafi, Mahdi Khemakhem

DataRush. Rapport final de la tâche 3 "Optimisation de tournées de véhicules avec collecte et livraison basée sur la prédiction". [Rapport de recherche] LAMIH, Université Polytechnique des Hauts-de-France. 2015. ⟨hal-03388880⟩

• Rapport

Adéquations des recommandations d’adaptation du siège avec les spécifications en vigueur et validation de la faisabilité par ZSFR/Air France

François Gabrielli, Philippe Pudlo, Jean Marc Obadia

[Rapport de recherche] LAMIH, Valenciennes. 2015. ⟨hal-03420736⟩

• Communication dans un congrès

Improving observer design for discrete-time TS descriptor models under the quadratic framework

Víctor Estrada Manzo, Zsofia Lendek, Thierry-Marie Guerra

The paper presents a new quadratic Lyapunov function for observer design for discrete-time nonlinear descriptor systems. The main idea is to represent the original nonlinear model as a Takagi- Sugeno one and then use Lyapunov's direct method to design the observer. The well-known Finsler'…

2nd IFAC Conference on Embedded Systems, Computer Intelligence and Telematics (CESCIT 2015), Jun 2015, Maribor, Slovenia. pp.276-281, ⟨10.1016/j.ifacol.2015.08.144⟩. ⟨hal-03416362⟩

• Article dans une revue

An Analysis of Driver's Avoiding Maneuver in a Highly Emergency Situation

Makoto Itoh, Marie-Pierre Pacaux-Lemoine, Frédéric Robache, Hervé Morvan

This paper discusses driver’s emergency avoiding behavior while he or she is driving a car in a rural area.Based on behavioral data obtained from an experiment conducted in France with a high-fidelity driving simulator, theauthors analyzed the driver behavior just before the collision. The results…

SICE Journal of Control, Measurement, and System Integration, 2015, 8 (1), pp.27-33. ⟨10.9746/jcmsi.8.27⟩. ⟨hal-03404355⟩

• Article dans une revue

Identification of lubrication regime on textured surfaces by multi-scale decomposition

Cédric Hubert, Krzysztof Kubiak, Maxence Bigerelle, André Dubois, Laurent Dubar

This paper focuses on the analysis of surfaces resulting from thickness reduction of aluminium strips, provided with lubricant reservoirs, and deformed with different lubricant viscosities and drawing velocities, by a specific experimental drawing process. During reduction, the lubricant is…

Tribology International, 2015, 82, Part B, pp.375-386. ⟨10.1016/j.triboint.2014.04.035⟩. ⟨hal-03451016⟩