Publications

• Article dans une revue

Reduced numerical model to investigate the dynamic behaviour of honeycombs under mixed shear–compression loading

Rami Tounsi, Bassem Zouari, Fahmi Chaari, Eric Markiewicz, Grégory Haugou, Fakhreddine Dammak

Cellular materials such as aluminium honeycombs combine lightweight with an efficient crash energy absorption capability. They have a major role in a wide range of transport applications to reduce gas emission by the design of lighter structures but remaining safe in accident case. Many…

Thin-Walled Structures, 2013, 73, pp.290-301. ⟨10.1016/j.tws.2013.08.016⟩. ⟨hal-03625158⟩

• Article dans une revue

Analysis of thin composite structures using an efficient hex-shell finite element

Seddik Shiri, Hakim Naceur

In this paper a general methodology for the modeling of material composite multilayered shell structures is proposed using a Hex-shell finite element modeling. The first part of the paper is devoted to the general FE formulation of the present composite 8-node Hex-shell element called SCH8, based…

Journal of Mechanical Science and Technology, 2013, 27 (12), pp.3755-3763. ⟨10.1007/s12206-013-0920-2⟩. ⟨hal-03624959⟩

• Article dans une revue

A comparison of the impact of CPOE implementation and organizational determinants on doctor–nurse communications and cooperation

Sylvia Pelayo, Françoise Anceaux, Janine Rogalski, Peter L. Elkin, Marie-Catherine Beuscart-Zephir

Objective To compare the impact of CPOE implementation and of the workplace organizational determinants on the doctor–nurse cooperation and communication processes. Method A first study was undertaken in eight different wards aimed to identify the different workplace organizations that support…

International Journal of Medical Informatics, 2013, 82 (12), pp.e321-e330. ⟨10.1016/j.ijmedinf.2012.09.001⟩. ⟨hal-03522368⟩

• Proceedings/Recueil des communications

Modelling, Optimisation and Simulation in Research and Industrial Applications

Driss Aboutajdine, A Skalli, B Benchekroun, Abdelhakim Artiba

Proceedings of 2013 International Conference on Industrial Engineering and Systems Management, Oct 2013, Rabat, Morocco. 2013, 978-2-9600532-4-1. ⟨hal-03479667⟩

• Article dans une revue

Relevance of Wavelet Shape Selection in a complex signal

Maxence Bigerelle, Gildas Guillemot, Zahra Khawaja, Mohamed El Mansori, Jérôme Antoni

In wavelet analysis, the signal reconstruction and statistical estimators are strongly influenced by the wavelet shape that controls the time-frequency localization properties. However, this dependency does not imply that the wavelet form is physically relevant to extract spatially invariant…

Mechanical Systems and Signal Processing, 2013, 41 (1-2), pp.14-33. ⟨10.1016/j.ymssp.2013.07.001⟩. ⟨hal-04530634⟩

• Article dans une revue

Effects of a turbulent wall jet on heat transfer over a non-confined backward-facing step

Nicolas Lancial, François Beaubert, Souad Harmand, G. Rolland

Experimental and numerical analysis of a turbulent wall jet on the heat transfer downstream of a non-confined backward-facing step are presented. Several configurations are studied to analyse the influence of the upstream flow and the height of the step. An infrared camera and a hot wire were used…

International Journal of Heat and Fluid Flow, 2013, 44, pp.336-347. ⟨10.1016/j.ijheatfluidflow.2013.07.003⟩. ⟨hal-03623110⟩

• Article dans une revue

A fully coupled elastoviscoplastic damage model at finite strains for mineral filled semi-crystalline polymer

Romain Balieu, Franck Lauro, Bruno Bennani, Rémi Delille, Tsukatada Matsumoto, Ernesto Mottola

A phenomenological finite strain non-associated elastoviscoplastic model coupled with damage is proposed in order to simulate the behaviour of a 20% mineral filled semi-crystalline polymer for a large strain rate range under several loading conditions. In the proposed model, the direct relation…

International Journal of Plasticity, 2013, 51, pp.241-270. ⟨10.1016/j.ijplas.2013.05.002⟩. ⟨hal-03470384⟩

• Article dans une revue

Analysis of the work-hardening behavior of C-Mn steels deformed under hot-working conditions

Eli Saúl Puchi-Cabrera, M.H. Staia, Jean-Dominique Guerin, Jacky Lesage, Mirentxu Dubar, Didier Chicot

The computation of loads, torques and power consumption of hot rolling processes conducted at industrial scale requires a detailed analysis of the work-hardening rate of the material, as well as a precise description of the changes in flow stress with microstructure and deformation conditions. The…

International Journal of Plasticity, 2013, 51, pp.145-160. ⟨10.1016/j.ijplas.2013.05.007⟩. ⟨hal-00871501⟩

• Communication dans un congrès

Instabilité Chronique de la Cheville : Caractérisation biomécanique par l’équilibre statique et dynamique ?

Raphaël Pionnier, Emilie Simoneau-Buessinger, Nicolas Decoufour, Christophe Popineau, Franck Barbier

18ème Congrès de Médecine et Kinésithérapie du Sport (Congrès de l’IRBMS), Institut de Recherche du Bien-être, de la Médecine et du Sport Santé, Nov 2013, Lille, France. ⟨hal-03520362⟩

• Thèse

Contribution to the development of the numerical simulation of woven composites for crash applications, Contribution au développement de la simulation numérique des matériaux composites à renforts tissés pour l'application au crash

Olivier Cousigné

This study presents the development of an experimental and numerical material characterization method relying on the investigation of the material behavior of woven composites, from the microscopic scale up to the macroscopic level by increasing progressively the complexity of the geometries and…, Cette étude présente le développement d'une méthode expérimentale et numérique de caractérisation du comportement d'un matériau composite à renforts tissés, depuis l'échelle microscopique jusqu'au niveau macroscopique, en augmentant progressivement la complexité des géométries…

Materials. Université de Valenciennes et du Hainaut-Cambresis, 2013. English. ⟨NNT : 2013VALE0029⟩. ⟨tel-01405836⟩