Publications

• Article dans une revue

Using deep learning to value free-form text data for predictive maintenance

Juan Pablo Usuga-Cadavid, Samir Lamouri, Bernard Grabot, Arnaud Fortin

Past maintenance logs may encapsulate meaningful data for predicting the duration of machine breakdowns, the potential causes of a problem, or the necessity to stop production to perform repair activities. These insights may be accessed using machine learning (ML). However, maintenance logs tend to…

International Journal of Production Research, 2022, 60 (14), pp.4548-4575. ⟨10.1080/00207543.2021.1951868⟩. ⟨hal-04010686⟩

• Chapitre d'ouvrage

Impact of Heat Integration from CO2 Compression on Energy Requirement and Equipment Costs in Power Plants Using Post-combustion Capture

Madjid Bentorki, Jian Chen, Fethi Aloui

This work presents a study of different CO2 compression models. Various CO2 compression options widely used in the industry will be modelled through Aspen plus and energy requirement and heat available will be quantified and compared. An operating costs and capital costs assessment has been first…

Prof. Dr. V. Edwin Geo; Prof. Dr. Fethi Aloui (Ed.). Energy and Exergy for Sustainable and Clean Environment, Volume 1, Springer Nature, pp.601-614, 2022, Green Energy and Technology, 978-981-16-8277-3. ⟨10.1007/978-981-16-8278-0_39⟩. ⟨hal-04150472⟩

• Chapitre d'ouvrage

Lattice Boltzmann Equation for Axisymmetric Swirling Thermal Flows Between Two Concentric Cylinders

Insaf Mehrez, Ramla Gheith, Fethi Aloui

The paper focuses on the flow and heat transfer flow between two concentric cylinders. It investigates the Taylor-Couette system with a rotating inner cylinder and an imposed radial temperature gradient. Taylor number, aspect ratio, and Grashof number were discussed to determine the temperature…

Prof. Dr. V. Edwin Geo; Prof. Dr. Fethi Aloui (Ed.). Energy and Exergy for Sustainable and Clean Environment, Volume 1, Springer Nature, pp.615-631, 2022, Green Energy and Technology, 978-981-16-8277-3. ⟨10.1007/978-981-16-8278-0_40⟩. ⟨hal-04150503⟩

• Chapitre d'ouvrage

Kinetic Study of Waste Tires Pyrolysis by Thermogravimetric Analysis Kissinger–Akahira–Sunose (KAS) Method

Hiba Rejeb, Emna Berrich, Mohamed Hachemi Chahbani, Fethi Aloui

The aim of this paper is to study the thermal degradation of waste tires (WT) by thermogravimetric analysis (TGA), for different heating rates, under nitrogen atmosphere (N2). Experiments were carried out at different heating rates to reach 800 °C. Kissinger–Akahira–Sunose (KAS) model was applied…

Prof. Dr. V. Edwin Geo; Prof. Dr. Fethi Aloui (Ed.). Energy and Exergy for Sustainable and Clean Environment, Volume 1, Springer Nature, pp.589-599, 2022, Green Energy and Technology, 978-981-16-8277-3. ⟨10.1007/978-981-16-8278-0_38⟩. ⟨hal-04150155⟩

• Communication dans un congrès

Contribution to Robot System Identification: Noise Reduction using a State Observer

Bilal Tout, Jason Chevrie, Laurent Vermeiren, Antoine Dequidt

Conventional identification approach based on the inverse dynamic identification model using least-squares and direct and inverse dynamic identification techniques has been effectively used to identify inertial and friction parameters of robots. However these methods require a well-tuned filtering…

19th International Conference on Informatics in Control, Automation and Robotics, Jul 2022, Lisbon, Portugal. pp.695-702, ⟨10.5220/0011322600003271⟩. ⟨hal-03788153⟩

• Thèse

User-Centred Design and Evaluation of Interactive System Assisting the Mobility of People with Intellectual Disability, Contribution à la conception centrée utilisateur et à l'évaluation d'un système interactif aidant la mobilité de personnes en situation de déficience intéllectuelle

Aymen Lakehal

This doctoral thesis, in Human-Computer Interaction (HCI) field, addresses the question of mobility assistance for people with intellectual disability (ID). The main goal is to use a user-centred approach to design and evaluate a navigation aid system (NAS). Navigating independently through the…, Cette thèse de doctorat, dans le domaine de l’interaction humain-machine (IHM), aborde la question de l’aide à la mobilité pour les personnes présentant une déficience intellectuelle (DI). L’objectif principal est d’utiliser une approche centrée-utilisateur pour concevoir et évaluer un système d’…

Human-Computer Interaction [cs.HC]. Université Polytechnique Hauts-de-France, 2022. English. ⟨NNT : 2022UPHF0010⟩. ⟨tel-03932687⟩

• Chapitre d'ouvrage

The Knapsack Problem and Its Variants: Formulations and Solution Methods

Christophe Wilbaut, Saïd Hanafi, Igor Machado Coelho, Abilio Lucena

The Knapsack Problem is among the most well-known and widely studied optimization problems. Given a set of items, each item with an associated weight, the problem asks for a subset of items with a total weight no larger than an available capacity and which maximizes a corresponding measure of…

The Palgrave Handbook of Operations Research, Springer International Publishing, pp.105-151, 2022, ⟨10.1007/978-3-030-96935-6_4⟩. ⟨hal-03723558⟩

• Communication dans un congrès

Investigations sur la modélisation d’un récupérateur à empilement piézoélectrique amplifié

Anthony Casisa, Barbara Lafarge, Vincent Lanfranchi, Christophe Delebarre, Sébastien Grondel

JNRSE 2022, Jul 2022, Bordeaux, France. ⟨hal-04398279⟩

• Communication dans un congrès

Environmental impacts of the Collaborative Intelligent Transport Systems (C-ITS): survey and research directions

Wassim Bouazza, Abdessamad Ait El Cadi, Abdelghani Bekrar, Atika Rivenq

The awareness of the climate emergency makes environmental issues a priority at many levels. In addition to political initiatives, research on the reduction of the environmental impact of human activities is on the rise. Among these activities, the transportation sector is among the most polluting…

GIN Conference on Logistics | New Technologies & Effective Circular Economy, LAMIH (Laboratory of industrial and human automation, mechanics and computer science); UPHF (Université Polytechnique Hauts-de-France); GIN (the Greening of Industry Network), Jul 2022, Valenciennes, France. ⟨hal-04736131⟩

• Thèse

Modélisation des surfaces réelles de contact et de leur évolution : intégration dans les simulations de crissement, Modelling real contact surfaces and their evolution : integration into squeal simulations

Yassine El Attaoui

Le crissement de frein est une nuisance sonore qui affecte le bien-être collectif et rend le système mécanique non conforme aux exigences du client. Sa réduction, voire sa suppression, représente depuis quelques décennies un enjeu majeur pour les industriels du secteur des transports ainsi que la…, Brake squeal is a noise nuisance that affects collective welfare and makes the mechanical system fail to meet customer requirements. Its reduction, or even its elimination, has been a major issue for the transport industry and the scientific community for several decades. This phenomenon, which is…

Mécanique des matériaux [physics.class-ph]. Université Polytechnique Hauts-de-France, 2022. Français. ⟨NNT : 2022UPHF0017⟩. ⟨tel-03957526⟩