Publications

• Communication dans un congrès

Un Living-Lab à destination des personnes âgées pour la prévention des chutes, l’autonomie et la mobilité

Jennifer Bassement, Christine Selvez, Fanny Hequet, Philippe Pudlo

3èmes Rencontres Francophones Transports et Mobilités, Jun 2021, Marne-la-Vallée, France. ⟨hal-03419413⟩

• Thèse

Swing-up Control of a power-assisted electrical Wheelchair, Commande d'un fauteuil roulant à assistance électrique

Michael Gray

According to the World Health Organization, more than 70 million disabled people in the world need a wheelchair to aid their daily mobility needs. Providing access to low cost wheelchairs that covers the users basic needs is therefore a societal challenge that not only contribute to their well-…, D'après l'Organisation Mondiale de la santé, plus de 70 millions de personnes à mobilité réduite ont besoin d'un fauteuil roulant pour assurer leurs déplacements quotidiens. Garantir l'accès à des fauteuil abordables et capable de couvrir les déplacements de base est un…

Automatic. Université Polytechnique Hauts-de-France, 2021. English. ⟨NNT : 2021UPHF0022⟩. ⟨tel-03351906⟩

• Article dans une revue

To Re-Route, or not to Re-Route: Impact of Real-Time Re-Routing in Urban Road Networks

Mohamed Amine Falek, Antoine Gallais, Cristel Pelsser, Sébastien Julien, Fabrice Theoleyre

Route planning represents a major challenge with a substantial impact on safety, economy, and even climate. An ever-growing urban population caused a significant increase in commuting times, therefore, stressing the prominence of efficient real-time route planning. In essence, the goal is to…

Journal of Intelligent Transportation Systems: Technology, Planning, and Operations, 2021, ⟨10.1080/15472450.2020.1807345⟩. ⟨hal-02614875⟩

• Article dans une revue

Corrigendum to « Low back pain in patients with Multiple Sclerosis : A systematic review and the prevalence in a French Multiple Sclerosis population» [Revue neurologique. Volume 177, Issue 4, (April 2021), Pages 349-358]

Caroline Massot, Cecile Donze, Marc-Alexandre Guyot, Sébastien Leteneur

The authors regret to have forgotten one acknowledgment, which now reads as follows: This work was supported by the ELSAT 2020 project, the European Union with the European Regional Development Fund, The French State, the Regional Council of Hauts-de-France and the Ligue Française contre la…

Revue Neurologique, 2021, 177 (6), pp.722. ⟨10.1016/j.neurol.2021.04.002⟩. ⟨hal-03710458⟩

• Article dans une revue

Takagi–Sugeno Fuzzy Unknown Input Observers to Estimate Nonlinear Dynamics of Autonomous Ground Vehicles: Theory and Real-Time Verification

Tran Anh-Tu Nguyen, Truong Quang Dinh, Thierry-Marie Guerra, Juntao Pan

In this article, we address the simultaneous estimation problem of the lateral speed, the steering input, and the effective engine torque, which play a fundamental role in vehicle handling, stability control, and fault diagnosis of autonomous ground vehicles. Due to the involved longitudinal-…

IEEE/ASME Transactions on Mechatronics, 2021, 26 (3), pp.1328 - 1338. ⟨10.1109/tmech.2020.3049070⟩. ⟨hal-04307204v2⟩

• Article dans une revue

Efficient thermomechanical analysis of functionally graded structures using the symmetric SPH method

Jiao Li, Guangchun Wang, Shuai Liu, Jun Lin, Yanjin Guan, Guoqun Zhao, Hakim Naceur, Daniel Coutellier, Tao Wu

Tailoring the thermal and mechanical properties plays an important role in manufacturing and designing functionally graded material (FGM) which is often applied in high temperature gradient environment. The present investigation will address the basics of thermoelastic problem solved by means of a…

Case Studies in Thermal Engineering, 2021, 25, pp.100889. ⟨10.1016/j.csite.2021.100889⟩. ⟨hal-03536533⟩

• Article dans une revue

Bi-local search based variable neighborhood search for job-shop scheduling problem with transport constraints

Moussa Abderrahim, Abdelghani Bekrar, Damien Trentesaux, Nassima Aissani, Karim Bouamrane

In job-shop manufacturing systems, an efficient production schedule acts to reduce unnecessary costs and better manage resources. For the same purposes, modern manufacturing cells, in compliance with industry 4.0 concepts, use material handling systems in order to allow more control on the…

Optimization Letters, 2021, 128 (16), pp.255-280. ⟨10.1007/s11590-020-01674-0⟩. ⟨hal-03367156⟩

• Communication dans un congrès

A Preliminary Study of IoT Multidisciplinary View in the Industry

Rebeca Campos Motta, Káthia Marçal de Oliveira, Guilherme Horta Travassos

39ème Congrès INFORSID, INFormatique des Organisations et Systèmes d'Information et de Décision, Jun 2021, Dijon, France. pp. 143-148. ⟨hal-03390226⟩

• Article dans une revue

Integrated production, maintenance and quality control policy for unreliable manufacturing systems under dynamic inspection

Abdessamad Ait El Cadi, Ali Gharbi, Karem Dhouib, Abdelhakim Artiba

This paper proposes a new joint production, maintenance, and dynamic sampling inspection control policy, for failure-prone manufacturing systems. The integrated policy help decision-makers to find both production rate and maintenance frequency, as well as the size of the sample to be inspected. The…

International Journal of Production Economics, 2021, 236, pp.108-140. ⟨10.1016/j.ijpe.2021.108140⟩. ⟨hal-03396123⟩

• Communication dans un congrès

Influence des échanges radiatifs sur l'étalement d'une goutte de verre

Maxime Cressin, Philippe Moreau, Fabien Béchet, Hakim Naceur, Dominique Lochegnies, Nadir Boukhari

29ème Congrès Français de Thermique - Thermique et Mix Energétique, Jun 2021, Belfort, France. ⟨hal-03439374⟩