Publications

• Rapport

DataRush. Rapport final de la tâche 3 "Optimisation de tournées de véhicules avec collecte et livraison basée sur la prédiction

Amine Alalou, Said Hanafi, Mahdi Khemakhem

DataRush. Rapport final de la tâche 3 "Optimisation de tournées de véhicules avec collecte et livraison basée sur la prédiction". [Rapport de recherche] LAMIH, Université Polytechnique des Hauts-de-France. 2015. ⟨hal-03388880⟩

• Chapitre d'ouvrage

Void Fraction Influence Over Aqueous Foam Flow: Wall Shear Stress and Core Shear Evolution

Rogelio Chovet, Fethi Aloui

In this study, the two main transport characterization problems of the foam flow are studied: foam flow stability, through the evolution of the velocity at the core of the foam, and rheology, with the study of the wall shear stress over the lateral walls, for different void fractions. The same…

Progress in Clean Energy Volume 1 Analysis and Modeling, Springer International Publishing, pp.909-931, 2015, ⟨10.1007/978-3-319-16709-1_66⟩. ⟨hal-03579829⟩

• Article dans une revue

Observer design for Takagi-Sugeno descriptor models: an LMI approach

Víctor Estrada Manzo, Thierry-Marie Guerra, Zsofia Lendek

This paper considers observer design for nonlinear descriptor systems. We propose approaches based on Takagi-Sugeno (TS) models. An extended estimation vector is used in order to keep the descriptor structure of the observer. The design conditions for this new type of observers are expressed as LMI…

Automatica, 2015, 52, pp.154-159. ⟨10.1016/j.automatica.2014.11.008⟩. ⟨hal-03428793⟩

• Article dans une revue

Identification of lubrication regime on textured surfaces by multi-scale decomposition

Cédric Hubert, Krzysztof Kubiak, Maxence Bigerelle, André Dubois, Laurent Dubar

This paper focuses on the analysis of surfaces resulting from thickness reduction of aluminium strips, provided with lubricant reservoirs, and deformed with different lubricant viscosities and drawing velocities, by a specific experimental drawing process. During reduction, the lubricant is…

Tribology International, 2015, 82, Part B, pp.375-386. ⟨10.1016/j.triboint.2014.04.035⟩. ⟨hal-03451016⟩

• Article dans une revue

Evaluating User Interface Adaptation using the Context of Use

Makram Soui, Khaled Ghedira, Mourad Abed

The aim of adaptive user interface is to provide different layouts and relevant information according to the current context-of-use (users, platforms and environments). Today, these systems are indispensable to those who want to retrieve appropriate information with less effort at anytime and…

International Journal of Adaptive, Resilient and Autonomic Systems , 2015, 6 (1), pp.1-24. ⟨10.4018/IJARAS.2015010101⟩. ⟨hal-03401544⟩

• Communication dans un congrès

Impact d'un sommet de côte et de ses aménagements sur le comportement et la réactivité cardiaque d'un conducteur à l'approche

Janick Naveteur, Jean Michel Auberlet, Julie Paxion, Florence Rosey, Françoise Anceaux, Marie-Pierre Pacaux-Lemoine

Questionnant la pertinence d'une approche psychophysiologique à l'analyse des situations, l'étude porte sur la conduite automobile. Centrée sur le franchissement de sommet de côte, elle est réalisée en simulateur, avec un parcours reproduisant le relief d'une route réelle. La…

8ème conférence de Psychologie Ergonomique (EPIQUE), Jul 2015, Aix en Provence, France. 12p. ⟨hal-01206186⟩

• Communication dans un congrès

Dynamic recrystallization observed at the tool/chip interface in machining

Yannick Senecaut, Michel Watremez, Julien Brocail, Laurence Fouilland-Paille, Laurent Dubar

In numerical approaches for high speed machining, the rheological behavior of machined materials is usually described by a Johnson Cook law. However, studies have shown that dynamic recrystallization phenomena appear during machining in the tool/chip interface. The Johnson Cook constitutive law…

ESAFORM 2015, Apr 2015, Graz, Austria. pp.1223-1228, ⟨10.4028/www.scientific.net/KEM.651-653.1223⟩. ⟨hal-01178171⟩

• Communication dans un congrès

Transmitted torque observer applied to real time engine and clutch torque estimation

Rémi Losero, Jimmy Lauber, Thierry-Marie Guerra

In automation control system applications, the transmitted engine and clutch torque are unavoidable information for the control strategies. For example, these information are required to engine control, hybrid vehicle and automated transmission management. An angular domain discrete observer is…

1st IFAC Workshop on Linear Parameter Varying Systems LPVS 2015, Oct 2015, Grenoble, France. pp.73-78, ⟨10.1016/j.ifacol.2015.11.116⟩. ⟨hal-03659494⟩

• Communication dans un congrès

Towards a Framework for Integration of Requirements Engineering in PLM

Albéric Cornière, Virginie Fortineau, Thomas Paviot, Samir Lamouri

Requirements Engineering is often seen as the process starting with the expression of requirements from stakeholders that aims to provide a coherent set of specifications, thus a starting point in the life cycle of a product. In a PLM context, managing the products data in order to prepare for the…

15th IFAC Symposium on Information Control Problems in Manufacturing, May 2015, Ottawa, Canada. pp.283-287, ⟨10.1016/j.ifacol.2015.06.095⟩. ⟨hal-03416997⟩

• Communication dans un congrès

A viscoelastic-viscoplastic model for short-fibre reinforced polymers with complex fibre orientations

Mariem Nciri, Delphine Notta-Cuvier, Franck Lauro, Fahmi Chaari, Bassem Zouari, Yamen Maalej

This paper presents an innovative approach for the modelling of viscous behaviour of short-fibre reinforced composites (SFRC) with complex distributions of fibre orientations and for a wide range of strain rates. As an alternative to more complex homogenisation methods, the model is based on an…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.04008, ⟨10.1051/epjconf/20159404008⟩. ⟨hal-03433232⟩