Publications

• Article dans une revue

Gestion de la diffusion info-communicationnelle d'un scanner de sûreté aéroportuaire innovant par les réseaux numériques, Managing the info-communicational dissemination of an innovative airport security scanner via the digital network

Michel Labour, Igor Crevits

Les réseaux numériques offrent de nombreuses opportunités de communiquer sur une innovation. L’analyse et la structuration des informations qui circulent s’avèrent déterminantes. Celles-ci reposent sur les travaux des Sciences de l’Information et de la Communication (SIC) et combinés à ceux de l’…, Digital networks offer numerous opportunities in communicating about a given innovation where the analysis and structuring of circulating information is a determining factor. This observation is based on studies conducted in the Information and Communicative Sciences and in the Decision Aiding…

Management des Technologies Organisationnelles (2014-..), 2015, 5, pp.145-154. ⟨hal-03402265⟩

• Rapport

Analyse biomécanique préliminaire de l’interaction passager / siège dans le cas d’un passager en fauteuil

François Gabrielli, Philippe Pudlo

[Rapport de recherche] LAMIH, Valenciennes. 2015. ⟨hal-03420770⟩

• Rapport

Modélisation multiphysique du montage et de l’utilisation d’une griffe de jonction de caténaire

Andrés Malo-Estepa, Laurent Dubar, André Dubois

[Rapport de recherche] Rapport FUI Railconnect+, LAMIH, Valenciennes. 2015. ⟨hal-03442627⟩

• Communication dans un congrès

Experimental characterization and macro-modeling of mechanical strength of multi-sheets and multi-materials spot welds under pure and mixed modes I and II

Rim Chtourou, Grégory Haugou, Nicolas Leconte, Bassem Zouari, Fahmi Chaari, Eric Markiewicz

Resistance Spot Welding (RSW) of multiple sheets with multiple materials are increasingly realized in the automotive industry. The mechanical strength of such new generation of spot welded assemblies is not that much dealt with. This is true in particular for experiments dedicated to investigate…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.01032, ⟨10.1051/epjconf/20159401032⟩. ⟨hal-03433911⟩

• Article dans une revue

Design of a device to induce swirling flow in pipes: A rational approach

François Beaubert, Halldor Pálsson, Sylvain Lalot, Isabelle Choquet, Hadrien Bauduin

In this study, a rational approach is proposed to design a device for inducing swirling flow in heat exchanger pipes, for improved efficiency in the laminar regime. First, 2D computational fluid dynamics results lead to select, among four profiles, the blade profile with the most favorable lift to…

Comptes Rendus. Mécanique, 2015, 343 (1), pp.1-12. ⟨10.1016/j.crme.2014.09.004⟩. ⟨hal-03452026⟩

• Communication dans un congrès

Croyances volatiles pour l'adaptation collective de véhicules autonomes : application à une cellule de production flexible

Emmanuel Adam

En se basant sur la notion de stigmergie, nous proposons la notion de croyance volatile. En fait un coefficient de dégradation est appliqué non pas à la valeur de la phéromone, mais à la confiance accordée à la croyance. Chaque agent dégrade ainsi les confiances accordées à ses croyances. Lorsqu’…

23es Journées Francophones sur les Systèmes Multi-Agents (JFSMA'15), Jun 2015, Rennes, France. pp.219-220. ⟨hal-01163023⟩

• Communication dans un congrès

Governance mechanism in control architectures for flexible manufacturing systems

José-Fernando Jimenez Gordillo, Abdelghani Bekrar, Damien Trentesaux, Gabriel Zambrano Rey, Paulo Leitão

Manufacturing systems, and specifically Flexible Manufacturing Systems (FMS), face the challenge of accomplish global optimal performance and reactiveness at dynamic manufacturing environments. For this reason, manufacturing control systems must incorporate mechanisms that support dynamic custom-…

15th IFAC Symposium on Information Control Problems in Manufacturing, May 2015, Ottawa, Canada. pp.1093-1098, ⟨10.1016/j.ifacol.2015.06.229⟩. ⟨hal-03416426⟩

• Communication dans un congrès

Damage characterization for particles filled semi-crystalline polymer

Franck Lauro, Romain Balieu, Bruno Bennani, Grégory Haugou, Benjamin Bourel, Fahmi Chaari, Tsukatada Matsumoto, Ernesto Mottola

Damage evolution and characterization in semi-crystalline polymer filled with particles under various loadings is still a challenge. A specific damage characterization method using Digital Image Correlation is proposed for a wide range of strain rates considering tensile tests with hydraulic jacks…

DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2015, Lugano, Switzerland. pp.01009, ⟨10.1051/epjconf/20159401009⟩. ⟨hal-03433114⟩

• Rapport

Spécification de modalités informationnelles pour l’implémentation dans SYVIGI et MACONDUITE pour l’écoconduite

Rudy Dahyot, Salvatore La Delfa, Simon Enjalbert, Mathieu Mouchel, Antoine Dequidt, Philippe Polet, Sébastien Lefebvre, Denis Miglianico, Frédéric Vanderhaegen, Denis Berdjag, Richard Kaczmarek, Hassan Omran

[Rapport de recherche] LAMIH, Valenciennes. 2015. ⟨hal-03420894⟩

• Chapitre d'ouvrage

Low Velocity Impact Behavior of Glass Fibre-Reinforced Polyamide

Jamel Mars, Mondher Wali, Rémi Delille, Fakhreddine Dammak

The low velocity impact behavior of composites made of polyamide (PA) as matrix and glass fibre as reinforcement has been investigated. The assessment of the impact behavior has driven the need to perform tensile tests to determine the elasto-plastic behavior of the composites. The specimens were…

Multiphysics Modelling and Simulation for Systems Design and Monitoring, 2, Springer International Publishing, pp.469-479, 2015, Applied Condition Monitoring, ⟨10.1007/978-3-319-14532-7_48⟩. ⟨hal-03451944⟩