Publications

• Article dans une revue

Novel semi-blind estimation for turbo decoding in impulsive noise channel

Ali Chemsa, Djamel Saigaa, Hatem Ghodbane, Abdelmalik Taleb-Ahmed

In order to calculate the branches metric in the maximum a posteriori algorithm of turbo decoder, it is mandatory to know the values of parameters of the noise contaminating the transmitted signal. In the case of a generalized Gaussian distribution impulsive noise, it is very difficult to estimate…

International Journal of System Assurance Engineering and Management, 2017, 8 (S1), pp.188-197. ⟨10.1007/s13198-015-0341-y⟩. ⟨hal-03430000⟩

• Communication dans un congrès

Démarche d'ingénierie de la sécurité dans le management de projet : activités de sécurité et relations entre acteurs

Wilson Goudalo, Frédéric Vanderhaegen, Christophe Kolski

Atelier "Sécurité des SI : technologies et personnes", Inforsid 2017, INFormatique des ORganisation et Systèmes d'Information et de Décision, May 2017, Toulouse, France. ⟨hal-03474709⟩

• Communication dans un congrès

Thermomechanical modeling of glass cooling including thermal radiation using P1 method

Kossiga Agboka, Fabien Béchet, Philippe Moreau, Dominique Lochegnies

Glass tempering consists in heating a glass product over its transition temperature followed by a rapid cooling to the ambient temperature. This process is used to improve the mechanical resistance of the glass product with compressive stresses on the surface and tensile stresses in the core. The…

CFM 2017 - 23ème Congrès Français de Mécanique, Aug 2017, Lille, France. ⟨hal-03465240⟩

• Article dans une revue

A review of characterisation and parameters identification of materials constitutive and damage models: From normalised direct approach to most advanced inverse problem resolution

Eric Markiewicz, Bertrand Langrand, Delphine Notta-Cuvier

The paper aims at providing an overview of the research activities performed in the two past decades in the field of materials characterisation under dynamic loadings (i.e. from to for structural crashworthiness and impact applications) and identification of parameters of constitutive behaviour and…

International Journal of Impact Engineering, 2017, 110, pp. 371-381. ⟨10.1016/j.ijimpeng.2017.01.028⟩. ⟨hal-01659636⟩

• Communication dans un congrès

Train timetable rearrangement facing infrastructure maintenance activities

Luis Diego Arenas Pimentel, Paola Pellegrini, Said Hanafi, Joaquin Rodriguez

Maintenance activities are necessary to maintain the functionality of the railway infrastructure. Commonly, the maintenance activities are planned first. Then, the timetable is elaborated respecting the unavailability periods caused by the former. However, unplanned maintenance activities may have…

ROADEF 2017, 18ème conférence de la Société française de Recherche Opérationnelle et d'Aide à la Décision, Feb 2017, Metz, France. 2p. ⟨hal-01469801v2⟩

• Article dans une revue

Macro-modeling of spot weld strength and failure: Formulation and identification procedure based on pure and mixed modes of loading, Modélisation à l'échelle macroscopique de la tenue et de la rupture des points soudés : formulation et procédure d'identification fondée sur des changements en mode purs et mixtes

Rim Chtourou, Nicolas Leconte, Bassem Zouari, Fahmi Chaari, Eric Markiewicz, Bertrand Langrand

Purpose This paper aims to propose a macro modeling approach to simulate the mechanical behavior and the failure of spot welded joints in structural crashworthiness computations. Design/methodology/approach A connector element is proposed to simulate the behavior and failure of spot weld joints. An…

Engineering Computations, 2017, 34 (3), pp.941-959. ⟨10.1108/EC-03-2016-0081⟩. ⟨hal-01580320⟩

• Article dans une revue

A Graphical Model Based on Performance Shaping Factors for Assessing Human Reliability

Subeer Rangra, Mohamed Sallak, Walter Schön, Frédéric Vanderhaegen

Human reliability assessment (HRA) is an aspect of risk analysis concerned with identifying, analyzing, and quantifying the causes, contributions, and occurrence of human failures. Applications of existing HRA methods are often domain-specific, and difficult to implement even for experts. Also, due…

IEEE Transactions on Reliability, 2017, 66 (4), pp.1120-1143. ⟨10.1109/TR.2017.2755543⟩. ⟨hal-01668143⟩

• Article dans une revue

Experimental assessment of the sudden-reversal of the oxygen dilution effect on soot production in coflow ethylene flames

Qianlong Wang, Guillaume Legros, Jérôme Bonnety, Céline Morin, Alexis Matynia, Jean-Louis Consalvi, Fengshan Liu

This paper explores the influence of oxygen dilution on soot production when oxygen is added to the fuel stream of a steady laminar ethylene flame established over the Santoro axisymmetric coflow burner. Interestingly, at an oxygen mole fraction X_{ax}^{O_2,trans} located between 30% and 32%, a…

Combustion and Flame, 2017, 183, pp.242-252. ⟨10.1016/j.combustflame.2017.05.001⟩. ⟨hal-01557989⟩

• Rapport

The Patches of the Nopol Automatic Repair System on the Bugs of Defects4J version 1.1.0

Thomas Durieux, Benjamin Danglot, Zhongxing Yu, Matias Martinez, Simon Urli, Martin Monperrus

This report lists the test-suite adequate patches found by the Nopol automatic repair system on version 1.1.0 of the Defects4J benchmark of bugs.

[Research Report] hal-01480084, Université Lille 1 - Sciences et Technologies. 2017. ⟨hal-01480084⟩

• Article dans une revue

Nopol: Automatic Repair of Conditional Statement Bugs in Java Programs

Jifeng Xuan, Matias Martinez, Favio Demarco, Maxime Clément, Sebastian Lamelas, Thomas Durieux, Daniel Le Berre, Martin Monperrus

We propose NOPOL, an approach to automatic repair of buggy conditional statements (i.e., if-then-else statements). This approach takes a buggy program as well as a test suite as input and generates a patch with a conditional expression as output. The test suite is required to contain passing test…

IEEE Transactions on Software Engineering, 2017, 43 (1), pp.34-55. ⟨10.1109/TSE.2016.2560811⟩. ⟨hal-01285008v2⟩